2012

Rodrigues, A. L.; Mosquera-Corral, A.; Machado, A. V.; Moura, I.; Matos, M. I.; Brito, A. G.; Nogueira, R. – Use of biopolymers as solid substrates for denitrification , 2012

Bernardo, Gabriel; Choudhury, Rudra Prosad; Beckham, Haskell W. – Diffusivity of small molecules in polymers : carboxylic acids in polystyrene , 2012-01-13

Ferrás, Luís Jorge Lima; Nóbrega, J. M.; Pinho, F. T. – Analytical solutions for channel flows of Phan-Thien–Tanner and Giesekus fluids under slip , 2012-03

Peralta, J.; Silva, Hugo Manuel Ribeiro Dias da; Hilliou, L.; Machado, A. V.; Pais, Jorge C.; Williams, R. Christopher – Mutual changes in bitumen and rubber related to the production of asphalt rubber binders , 2012

Ferreira, Shana Pires; Ruiz, Walter; Gaspar-Cunha, A. – Rheological and thermal characteristics of wheat gluten biopolymers plasticized with glycerol , 2012

Novais, Rui Manuel Freitas; Simon, Frank; Paiva, M. C.; Covas, J. A. – The influence of carbon nanotube functionalization route on the efficiency of dispersion in polypropylene by twin-screw extrusion , 2012-08

Carvalho, M. Teresa; Ferreira, Célia; Santos, Liliana R.; Paiva, M. C. – Optimization of froth flotation procedure for poly(ethylene terephthalate) recycling industry , 2012

Domingues, N.; Gaspar-Cunha, A.; Covas, J. A. – A quantitative approach to assess the mixing ability of single-screw extruders for polymer extrusion , 2012

Santos, Isa C. T.; Gazelle, G. Scott; Rocha, L. A.; Tavares, João Manuel R. S. – Medical device specificities: opportunities for a dedicated product development methodology , 2012-03

Barbosa, Carlos N.; Viana, J. C.; Franzen, Markus; Simões, Ricardo – Effect of the impact conditions on the mechanical properties of injection-molded parts , 2012

Todorov, Lyudmil V.; Martins, Carla I.; Viana, J. C. – Solid-state structural evolution of poly (ethylene terephthalate) during step uniaxial stretching from different initial morphologies : an in situ wide angle X-ray scaterring study , 2012

Antunes, C. F.; van Duin, M.; Machado, A. V. – Effect of crosslinking on morphology and phase inversion of EPDM/PP blends , 2012-03

Gaspar-Cunha, A.; Carneiro, O. S.; Cunha, S. M.; Covas, J. A. – Laboratory modular instrumented single screw extruder for optimisation of polymer processing , 2012

Arezes, P.; Bernardo, C. A.; Mateus, Olga – Measurement strategies for occupational noise exposure assessment : a comparison study in different industrial environments , 2012-01

Moura, I.; Nogueira, R.; Legare, Véronique Bounor; Machado, A. V. – Synthesis of EVA-g-PLA copolymers using transesterification reactions , 2012

Correia, Mário Simões; Miranda, A. S.; Oliveira, Marta Cristina; Capela, Carlos Alexandre; Pouzada, A. S. – Analysis of friction in the ejection of thermoplastic mouldings , 2012

Velosa, J. C.; Rana, S.; Fangueiro, Raúl; Hattum, F. W. J. van; Soutinho, Hélder Filipe Cunha; Marques, S. – Mechanical behaviour of novel sandwich composite panels based on 3D knitted spacer fabrics , 2012-01

Silva, J.; Cardoso, Paulo; Paleo, A. J.; Hattum, F. W. J. van; Simões, Ricardo; Lanceros-Méndez, S. – On the origin of the electrical response of vapor grown carbon nanofiber + epoxy composites , 2012

Barbas, J. M.; Machado, Ana; Covas, J. A. – In-line near-infrared spectroscopy for the characterization of dispersion in polymer-clay nanocomposites , 2012

Carneiro, O. S.; Covas, J. A.; Reis, R. L.; Brulé, B.; Flat, Jean.-Jacques – The effect of processing conditions on the characteristics of electrically conductive thermoplastic composites , 2012

Simões, Carla L.; Pinto, Lígia; Bernardo, C. A. – Modelling the economic and environmental performance of engineering products: a materials selection case study , 2012

Simões, Carla L.; Pinto, Lígia; Bernardo, C. A. – Modelling the environmental performance of composite products : benchmark with traditional materials , 2012-08

Costa, Ângelo; Castillo, José Carlos; Novais, Paulo; Fernández-Caballero, Antonio; Simões, Ricardo – Sensor-driven agenda for intelligent home care of the elderly , 2012

Teixeira, Cristina; Covas, J. A.; Stützle, Thomas; Gaspar-Cunha, A. – Multi-objective ant colony optimization for the twin-screw configuration problem , 2012

Frontini, P. M.; Pettarin, Valeria; Pouzada, A. S. – Making an impact with nanocomposites , 2012-11-24

Camboa, Andre; Silva, Helena; Teixeira, Alexandre; Ribeiro, Bernardo; Nunes, J. P. – Hybrid design for automotive body panels , 2012-04

Santos, Isa C. T.; Gazelle, G. Scott; Rocha, Luís A.; Tavares, João Manuel R. S. – Evolution of the cost-effectiveness of endovascular and open surgical repair of abdominal aortic aneurysms , 2012-04

Carneiro, O. S.; Covas, J. A.; Domingues, C. – Bi-axially oriented blown film technology: searching for suitable polymers and processing conditions , 2012

Vieira, D. G.; Meireles, José F.; Nunes, J. P.; Silva, Lucas F. – Substituting conventional steel alloys by carbon fibre composites in structural parts of an existing laser cutting equipment , 2012

Cardoso, Paulo; Silva, J.; Moreira, J. Agostinho; Klosterman, D.; Hattum, F. W. J. van; Simões, Ricardo; Lanceros-Méndez, S. – Temperature dependence of the electrical conductivity of vapor grown carbon nanofiber/epoxy composites with different filler dispersion levels , 2012

Moreira, R.; Chenlo, F.; Silva Blanco, C.; Torres, M. D.; Diaz-Varela, D.; Hilliou, L.; Argence, H. – Surface tension and refractive index of guar and tragacanth gums aqueous dispersions at different polymer concentrations, polymer ratios and temperatures , 2012

Bernardo, Gabriel – Diffusivity of alkanes in polystyrene , 2012-03-02

Ferrás, Luís Jorge Lima; Nóbrega, J. M.; Pinho, F. T. – Analytical solutions for newtonian and inelastic non-newtonian flows with wall slip , 2012-05

Paiva, M. C.; Zhou, B.; Fernando, K. A. S.; Lin, Y.; Lopes, P. E.; Pennington, W. T.; Kennedy, J. M.; Sun, Y. P. – Physical and mechanical characterization of nanocomposites with carbon nanotubes functionalized with the matrix polymer , 2012-03-20

Novais, R. M.; Covas, J. A.; Paiva, M. C. – The effect of flow type and chemical functionalization on the dispersion of carbon nanofiber agglomerates in polypropylene , 2012-02-02

Oliveira, M.; Nogueira, R.; Machado, A. V. – Synthesis of aluminium nanoparticles in a PP matrix during melt processing: effect of the alkoxide organic chain , 2012

Leite, Janaina L.; Salmoria, Gean; Paggi, R. A.; Ahrens, Carlos; Pouzada, A. S. – Microstructural characterization and mechanical properties of functionally graded PA12/HDPE parts by selective laser sintering , 2012

Carvalho, Irene; Baier, Thomas; Simões, Ricardo; Silva, Arlindo – Reducing fuel consumption through modular vehicle architectures , 2012

Ferrás, Luís Jorge Lima; Afonso, A. M.; Alves, M. A.; Nóbrega, J. M.; Pinho, F. T. – Development length in planar channel flows of newtonian fluids under the influence of wall slip , 2012-09-24

Ferreira, A.; Cardoso, Paulo; Klosterman, D.; Covas, J. A.; Hattum, F. W. J. van; Vaz, F.; Lanceros-Méndez, S. – Effect of filler dispersion on the electromechanical response of epoxy/vapour grown carbon nanofiber composites , 2012

Mould, S. T.; Barbas, J. M.; Machado, A. V.; Nóbrega, J. M.; Covas, J. A. – Monitoring the production of polymer nanocomposites by melt compounding with on-line rheometry , 2012

Dobrzański, L. A.; Bilewicz, M.; Viana, J. C. – Polymer nanocomposites reinforced with montmorillonite , 2012-01

Silva, Jaime; Simões, Ricardo; Lanceros-Méndez, S. – Modeling carbon nanotube electrical properties in CNT/polymer composites , 2012

Carneiro, O. S.; Nóbrega, J. M. – Main issues in the design of extrusion forming tools , 2012

Gaspar-Cunha, A.; Mendes, F.; Duarte, J.; Vieira, Armando; Ribeiro, Bernardete; Ribeiro, André M. S.; Neves, João Carvalho – Feature selection for bankruptcy prediction: a multi-objective optimization approach , 2012

Denchev, Z.; Dencheva, Nadya Vasileva – Manufacturing and properties of aramid-reinforced composites , 2012-08

Santos, Isa C. T.; Sepúlveda, A. T.; Viana, J. C.; Pontes, A. J.; Wardle, B. L.; Sampaio, S. M.; Roncon-Albuquerque, R.; Tavares, João Manuel R. S.; Rocha, L. A. – Improving post-EVAR surveillance with a smart stent-graft , 2012

Moura, I.; Machado, A. V. – Modification of biodegradable polymers through rreactive extrusion-I , 2012

Nóbrega, J. M.; Carneiro, O. S. – Profile forming tools , 2012

Denchev, Z.; Dencheva, Nadya Vasileva – Preparation, mechanical properties and structural characterization of microfibrillar composites based on polyethylene/polyamide blends , 2012-09