2011

Bessada, Rosa; Silva, Graça; Paiva, M. C.; Machado, A. V. – Functionalization of PET and PA6.6 woven fabrics , 2011-05-10T16:05:37Z

Ribeiro, C. J.; Viana, J. C.; Vilaça, F.; Azenha, J. – Design and simulation of automotive plastic pillars for occupant protection , 2011-07-28T11:24:48Z

Denchev, Z.; Dencheva, Nadya Vasileva; Funari, S. S.; Motovilin, M.; Schubert, Tom; Stribeck, N. – Nanostructure and mechanical properties studied during dynamical straining of microfibrillar reinforced HDPE/PA blends , 2011-09-06T10:42:35Z

Fernandes, C. S.; Dias, Ricardo P.; Nóbrega, J. M.; Afonso, I. M.; Melo, L. F.; Maia, J. M. – Simulation of stirred yoghurt processing in plate heat exchangers , 2011-06-09T13:19:24Z

Guimarães, D. A.; Alves, A.; Pontes, A. J. – The use of stereolithography in direct tooling , 2011-08-04T10:25:46Z

Hancic, A.; Kosel, F.; Campos, A. R.; Cunha, A. M.; Gantar, G. – A model for predicting the mechanical properties of wood-plastic composites : a micro-mechanical approach , 2011-08-05T13:34:12Z

Pick, L. T.; Harkin-Jones, Eileen; Oliveira, M. J.; Cramez, M. C. – The effect of cooling rate on the impact and dynamic mechanical properties of rotationally moulded metallocene catalysed linear low density polyethylene , 2011-07-05T14:37:05Z

Santos, R. M.; Botelho, Gabriela; Machado, A. V. – Artificial and natural weathering of ABS , 2011-08-02T15:27:25Z

Bernardo, Gabriel; Vesely, Drahosh – Anomalous swelling of a polystyrene matrix in organic solvents , 2011-08-01T11:49:44Z

Martins, J. A. – Toward a physical definition of entanglements , 2011-12-09T18:04:29Z

Silva, J. F.; Nunes, J. P.; Velosa, J. C.; Bernardo, C. A.; Marques, A. T. – Thermoplastic matrix towpreg production , 2011-08-02T15:40:52Z

Pouzada, A. S. – Hybrid moulds : a case of integration of alternative materials and rapid prototyping for tooling , 2011-06-14T09:47:54Z

Viana, J. C.; Cunha, A. M.; Billon, N. – Experimental characterization and computational simulations of the impact behavior of injection-molded polymers , 2011-08-02T15:44:16Z

Domingues, N.; Camesasca, M.; Kaufman, M.; Manas-Zloczower, I.; Gaspar-Cunha, A.; Covas, J. A. – Modeling of agglomerate dispersion in single screw extruders , 2011-09-05T09:48:47Z

Dias, R. A.; Cretu, E.; Wolffenbuttel, R. F.; Rocha, Luís A. – Pull-in-based μg-resolution accelerometer: characterization and noise analysis , 2011-11-29T17:17:23Z

Sanchez-Garcia, M. D.; Hilliou, L.; Lagaron, J. M. – Morphology and water barrier properties of nanobiocomposites of k/i-hybrid carrageenan and cellulose nanowhiskers , 2011-08-02T15:28:28Z

Leite, Janaina L.; Salmoria, Gean; Paggi, R. A.; Ahrens, Carlos; Pouzada, A. S. – Microstructural characterization and mechanical properties of functionally graded PA12/HDPE parts by selective laser sintering , 2011-10-13T16:36:41Z

Filipe, Susana A.; Maia, J. M.; Leal, Catarina Rosa; Cidade, Maria Teresa – Influence of processing conditions on the morphological development and final mechanical properties of PP/LCP blends , 2011-08-05T14:30:55Z

Barroso, V. C.; Maia, J. M. – Influence of long-chain branching on the rheological behavior of polyethylene in shear and extensional flow , 2011-06-08T12:53:38Z

Machado, A. V.; Yquel, Virginie; Covas, J. A.; Flat, Jean.-Jacques; Ghamri, Nessim; Wollny, Andreas – The effect of the compatibilization route of PA/PO blends on the physico-chemical phenomena developing along a twin-screw extruder , 2011-06-14T16:35:43Z

Dencheva, Nadya Vasileva; Nunes, Teresa G.; Oliveira, M. J.; Denchev, Z. – Crystalline structure of polyamide 12 as revealed by solid-state 13C NMR and synchrotron WAXS and SAXS , 2011-06-09T16:37:30Z

Machado, H. B.; Correia, R. N.; Covas, J. A. – Synthesis, extrusion and rheological behaviour of PU/HA composites for biomedical applications , 2011-08-02T15:27:16Z

Machado, A. V.; Moura, I.; Duarte, F. M.; Botelho, Gabriela; Nogueira, R.; Brito, A. G. – Evaluation of properties and biodeterioration’s potential of polyethylene and aliphatic polyesters blends , 2011-07-29T10:21:20Z

Martins, Manuel Rodrigues; Covas, J. A. – Helical flow during rotational pipe extrusion, , 2011-06-14T10:39:27Z

Selada, Antonio; Manaia, Ana; Vieira, Maria Teresa; Pouzada, A. S. – Effect of LBM and large-area EBM finishing on micro-injection moulding surfaces , 2011-06-21T14:13:13Z

Gaspar-Cunha, A.; Covas, J. A.; Domingues, N. – Estimation of the morphology development of immiscible liquid-liquid systems during single screw extrusion , 2011-08-05T10:17:48Z

Musampa, R. M.; Alves, M. M.; Maia, J. M. – Phase separation, rheology and microstructure of pea protein-kappa-carrageenan mixtures , 2011-08-05T10:23:24Z

Berzini, F.; Vergnes, B.; Canevarolo, S. V.; Machado, A. V.; Covas, J. A. – Evolution of the peroxide-induced degradation of polypropylene along a twin-screw extruder : experimental data and theoretical predictions , 2011-06-13T14:47:40Z

Fonseca, S. Cabral; Nunes, J. P.; Rodrigues, Maria Paula M. C.; Eusébio, Maria Isabel – Durability of carbon fibre reinforced polymer laminates , 2011-12-14T17:25:51Z

Cho, Seahan; Hong, Joung Sook; Lee, Seung Jong; Ahn, Kyung Hyun; Covas, J. A.; Maia, J. M. – Morphology and rheology of polypropylene/polystyrene/clay nanocomposites in batch and continuous melt mixing processes , 2011-12-14T11:23:58Z

Cunha, Maria Manuela Cruz; Tavares, António J.; Simões, Ricardo – Handbook of research on developments in e-health and telemedicine: technological and social perspectives , 2011-03-30T10:29:02Z

Silva, Arlindo; Simões, Ricardo – Handbook of research on trends in product design and development: technological and organizational perspectives , 2011-03-29T10:13:07Z

Gonçalves, Mathias; Salmoria, Gean; Pouzada, A. S. – Study of the tribological properties of moulds obtained by stereolithography , 2011-07-29T14:23:23Z

Denchev, Z. – In-situ composite materials based on oriented polymer blends : preparation, structure and properties , 2011-07-05T10:09:29Z

Covas, J. A.; Gaspar-Cunha, A. – Introduction [to] "Optimization in polymer processing" , 2011-12-02T11:13:37Z

Covas, J. A.; Gaspar-Cunha, A. – Polymer extrusion: setting the operating conditions and defining the screw geometry , 2011-12-02T11:24:03Z

Silva, J. F.; Nunes, J. P.; Bernardo, C. A.; Marques, A. T. – Thermoplastic matrix composites from towpregs , 2011-12-09T16:34:00Z

Nóbrega, J. M.; Carneiro, O. S.; Covas, J. A. – CAE aplicado ao projecto de sistemas de calibração/arrefecimento para perfis , 2011-06-13T16:08:54Z

Morelli, Carolina L.; Sousa, José Alexandrino; Pouzada, A. S. – Assessment of weld line performance of polypropylene/talc mouldings produced in hot runner injection moulds , 2011-07-29T12:11:50Z

Nóbrega, J. M.; Carneiro, O. S. – Automatic design of extrusion dies and calibration/cooling systems , 2011-12-20T16:45:33Z

Nóbrega, J. M.; Carneiro, O. S. – Automatic design in profile extrusion: flow balance and cooling , 2011-07-29T12:04:29Z

Afonso, José A.; Macedo, Pedro; Rocha, Luís A.; Correia, J. H. – Hierarchical wireless networks of body sensor networks for healthcare applications , 2011-07-29T14:05:10Z

Martínez Gamba, Matias R.; Frontini, P. M.; Pouzada, A. S. – Impact properties and microhardness of glass reinforced polypropylene , 2011-08-01T12:17:20Z

Santos, R. M.; Cramez, M. C.; Botelho, Gabriela; Machado, A. V. – Natural and accelerated weathering of Acrylonitrile-Butadiene-Styrene (ABS) , 2011-12-19T14:22:19Z

Agassant, J. F.; Covas, J. A. – An overview of polymer processing modelling , 2011-07-29T10:48:12Z

Apostolov, Anton Atanassov; Samokovlijski, O.; Fakirov, Stoyko; Stribeck, N.; Denchev, Z.; Evstatiev, M.; Friedrich, K.; Funari, S. S. – Trans-crystallisation with reorientation of polypropylene in drawn PET/PP and PA66/PP blends : part. 1 study with WAXS of synchrotron radiation , 2011-06-08T11:42:02Z

Domingues, N.; Gaspar-Cunha, A.; Covas, J. A. – Modelação da mistura de polímeros em extrusoras monofuso , 2011-06-09T12:01:00Z

Almeida, Maria de Fátima; Machado, A. V.; Covas, J. A. – Using TEM and SEM to unveil the role of nanoclays in polymer blends , 2011-07-29T12:39:37Z

De Micco, S.; Frontini, P. M.; Viana, J. C. – Fracture behaviour of injection moulded polypropylene : the effect of processing conditions , 2011-07-28T17:20:18Z

Ferreira, José C.; Fonseca, Carlos M.; Gaspar-Cunha, A. – Selection of solutions in a multi-objective environment: polymer extrusion a case study , 2011-07-29T16:45:24Z