2011

Cardoso, Paulo; Silva, J.; Covas, J. A.; Hattum, F. W. J. van; Simões, Ricardo; Lanceros-Méndez, S. – The influence of the dispersion method on the electrical properties of vapor-grown carbon nanofiber/epoxy composites , 2011

Antunes, Carla Filipa Melo Silva; Duin, M. van; Machado, A. V. – Morphology and phase inversion of EPDM/PP blends – effect of viscosity and elasticity , 2011-08-23

Machado, A. V.; Neves, Isabel C.; Botelho, Gabriela; Silva, Maria Manuela; Fonseca, A. Maurício C. – Stability of nanocomposites of poly(ε-caprolactone) with tungsten trioxide , 2011-05-06

Silva, J.; Ribeiro, S; Lanceros-Méndez, S.; Simões, Ricardo – The influence of matrix mediated hopping conductivity, filler concentration, aspect ratio and orientation on the electrical response of carbon nanotube/polymer nanocomposites , 2011

Dencheva, Nadya Vasileva; Pouzada, A. S.; Kearns, Mark P.; Denchev, Z.; Oliveira, Maria J. – Mechanical properties of polyamide 6 reinforced microfibrilar composites , 2011-02

Lima, Patricia; Fonseca, Carlos; Vaz, F.; Machado, A. V.; Pedrosa, P. – Plasma surface activation and TiN coating of a TPV substrate for biomedical applications , 2011

Oliveira, M.; Ribeiro, Daniel; Nóbrega, J. M.; Machado, A. V.; Brito, A. G.; Nogueira, R. – Removal of phosphorus from water using active barriers: Al2O3 immobilized on to polyolefins , 2011

Moreira, R.; Chenlo, F.; Torres, M. D.; Prieto, D. M; Sousa, A. M. M.; Hilliou, L.; Gonçalves, M. P.; Silva Blanco, C. – Drying kinetics of biofilms obtained from chestnut starch and carrageenan with and without glycerol , 2011

Ferreira, A.; Costa, Pedro; Carvalho, Helder; Nóbrega, J. M.; Sencadas, V.; Lanceros-Méndez, S. – Extrusion of poly(vinylidene fluoride) filaments: effect of the processing conditions and conductive inner core on the electroactive phase content and mechanical properties , 2011

Antunes, Carla Filipa; Machado, A. V.; Duin, M. van – Morphology development and phase inversion during dynamic vulcanisation of EPDM/PP blends , 2011-04-22

Magalhães, R.; Durães, N.; Silva, J.; Silva, M.; Sencadas, Vítor João Gomes Silva; Botelho, Gabriela; Gómez Ribelles, J. L.; Lanceros-Méndez, S. – The role of solvent evaporation in the microstructure of electroactive β-poly(vinylidene fluoride) membranes obtained by isothermal crystallization , 2011

Simões, Carla L.; Xará, Susana M.; Bernardo, C. A. – Life cycle assessment of a road safety product made with virgin and recycled HDPE , 2011-04

Michelangelli, O. P.; Yamanoi, Masayuki; Gaspar-Cunha, A.; Covas, J. A. – Modelling pellet flow in single extrusion with DEM , 2011

Santos, Isa C. T.; Tavares, João Manuel R. S.; Rocha, Luís A. – Selection in the development of medical devices : the case of the smart stent-graft , 2011-06-09

Mould, Sacha Trevelyan; Barbas, J. M.; Machado, A. V.; Nóbrega, J. M.; Covas, J. A. – Measuring the rheological properties of polymer melts with on-line rotational rheometry , 2011-05-03

Ferreira, Vânio; Santos, Luís Paulo; Franzen, Markus; Ghouati, Omar; Simões, Ricardo – Estimating local part thickness in midplane meshes for finite element analysis , 2011

Moura, I.; Machado, A. V.; Duarte, F. M.; Nogueira, R. – Biodegradability assessment of aliphatic polyesters-based blends using standard methods , 2011

Todorov, Lyudmil V.; Martins, Carla I.; Viana, J. C. – Structural development of poly(ethylene terephthalate) during uniaxial stretching above the glass-transition temperatura: study of the statistical influence of the stretching variables , 2011

Dias, R. A.; Mol, L.; Wolffenbuttel, R. F.; Cretu, E.; Rocha, Luís A. – Design of a time-based micro-g accelerometer , 2011-08

Teixeira, Cristina; Covas, J. A.; Stützle, Thomas; Gaspar-Cunha, A. – Engineering an efficient two-phase local search algorithm for the co-rotating twin-screw extruder configuration problem , 2011-03

Pinheiro, A. C.; Bourbon, A. I.; Rocha, Cristina M. R.; Ribeiro, Clara; Maia, J. M.; Gonçalves, M. P.; Teixeira, J. A.; Vicente, A. A. – Rheological characterization of κ-carrageenan/galactomannan and xanthan/galactomannan gels : comparison of galactomannans from non-traditional sources with conventional galactomannans , 2011

Martinho, P. G.; Netto, A. Sabino; Ahrens, Carlos; Salmoria, Gean; Pouzada, A. S. – Hybrid moulds with epoxy-based composites : effects of materials and processing on shrinkage and warpage , 2011

Bessada, Rosa; Silva, Graça; Paiva, M. C.; Machado, A. V. – Functionalization of PET and PA6.6 woven fabrics , 2011

Dias, R. A.; Cretu, E.; Wolffenbuttel, R. F.; Rocha, Luís A. – Pull-in-based μg-resolution accelerometer: characterization and noise analysis , 2011

Selada, Antonio; Manaia, Ana; Vieira, Maria Teresa; Pouzada, A. S. – Effect of LBM and large-area EBM finishing on micro-injection moulding surfaces , 2011

Fonseca, S. Cabral; Nunes, J. P.; Rodrigues, Maria Paula M. C.; Eusébio, Maria Isabel – Durability of carbon fibre reinforced polymer laminates , 2011

Cho, Seahan; Hong, Joung Sook; Lee, Seung Jong; Ahn, Kyung Hyun; Covas, J. A.; Maia, J. M. – Morphology and rheology of polypropylene/polystyrene/clay nanocomposites in batch and continuous melt mixing processes , 2011-02

Antunes, P. J.; Dias, Gustavo R.; Coelho, A. T.; Rebelo, F.; Pereira, Tiago – Nonlinear 3D foot FEA modeling from CT scan medical images , 2011

Covas, J. A.; Gaspar-Cunha, A. – Introduction [to] "Optimization in polymer processing" , 2011

Covas, J. A.; Gaspar-Cunha, A. – Polymer extrusion: setting the operating conditions and defining the screw geometry , 2011

Silva, J. F.; Nunes, J. P.; Bernardo, C. A.; Marques, A. T. – Thermoplastic matrix composites from towpregs , 2011-09

Nóbrega, J. M.; Carneiro, O. S. – Automatic design of extrusion dies and calibration/cooling systems , 2011

Rocha, L. A.; Sepúlveda, A. T.; Pontes, A. J.; Viana, J. C.; Santos, Isa C. T.; Tavares, João Manuel R. S. – Study of pressure sensors placement using an Abdominal Aortic Aneurysm (AAA) model , 2011

Santos, R. M.; Cramez, M. C.; Botelho, Gabriela; Machado, A. V. – Natural and accelerated weathering of Acrylonitrile-Butadiene-Styrene (ABS) , 2011

Vicente, A. A.; Cerqueira, M. A.; Hilliou, L.; Rocha, C. – Protein-based resins for food packaging , 2011

Costa, Sidonie; Duarte, F. M.; Covas, J. A. – Using matlab to compute heat transfer In free form extrusion , 2011-10

Gaspar-Cunha, A.; Covas, J. A.; Vergnes, B.; Berzin, Françoise – Reactive extrusion : optimization of representative processes , 2011

Denchev, Z.; Viana, J. C. – X-ray scattering studies on multiphasic polymer systems , 2011

Santos, Isa C. T.; Tavares, João Manuel R. S.; Sepúlveda, A. T.; Pontes, A. J.; Viana, J. C.; Rocha, Luís A. – Development of a flexible pressure sensor for measurement of endotension , 2011

Gaspar-Cunha, A.; Ferreira, José; Covas, J. A.; Fonseca, Carlos M. – Extending optimization algorithms to complex engineering problems , 2011

Covas, J. A.; Pessan, L. A.; Machado, A. V.; Larocca, N. M. – Polymer blend compatibilization by copolymers and functional polymers , 2011

Rocha, Luís A.; Silva, Cátia Samanta Ribeiro; Pontes, A. J.; Viana, J. C. – 3 axis polymeric accelerometer and method of production , 2011

Pirraco, Rogério – Co-cultures and cell sheet engineering as relevant tools to improve the outcome of bone tissue engineering strategies , 2011-10-24

Silva, Marta Luísa Sousa Dias Alves da – In vitro models for cartilage engineering using primary cells and biodegradable scaffolds , 2011-03-28

Moura, I. – Development of biodegradable materials by reactive extrusion , 2011-11-15

Domingues, N. – Mixing in single screw extrusion: modelling and optimization , 2011-11-11

Selada, António Cordeiro Baptista – Evaluation of subtractive microtechnologies for injection micromoulding , 2011-12-16

Motovilin, Mladen Feodorov – Development and Investigation of new hybrid composite materials based on oriented blends of thermoplastic polymers and nanosized ionorganic fillers , 2011-07-01

Todorov, Lyudmil V. – Multiscale morphology evolution of PET and its nanocomposites under deformation , 2011-09-21

Coutinho, Daniela F. – Micro/nano-scale strategies for engineering in vitro the celular microenvironment using biodegradable biomaterials , 2011-12-05