Sepúlveda, A. T.; Moreira, A.; Fachin, F.; Wardle, B. L.; Silva, J. M.; Pontes, A. J.; Viana, J. C.; Rocha, L. A.
– Inductive-coupling system for abdominal aortic aneurysms monitoring based on pressure sensing
, 2010
Livro de atas - Texto completo
Cunha, A. C.; Pontes, A. J.
– Microinjection of polipropylene with nanoclays
, 2010
Livro de atas - Texto completo
Costa, S. F.; Duarte, F. M.; Covas, J. A.
– Modelling of the thermal behaviour of free form extrusion
, 2010
Livro de atas - Texto completo
Almeida, Maria de Fátima; Machado, A. V.; Covas, J. A.
– The morphology during extrusion of PA6/PP blends in the presence of nanoclays
, 2010
Livro de atas - Texto completo
Gaspar-Cunha, A.; Fernandes, Célio Bruno Pinto; Viana, J. C.; Pontes, A. J.
– Multi-objective optimization of injection molding
, 2010
Livro de atas - Texto completo
Gaspar-Cunha, A.
– Feature selection using multi-objective evolutionary algorithms : application to cardiac SPECT diagnosis
, 2010
Livro de atas - Texto completo
Ribeiro, Bernardete; Silva, C.; Vieira, Armando; Gaspar-Cunha, A.; Neves, João
– Financial distress model prediction using SVM +
, 2010
Livro de atas - Texto completo
Ferreira, Tânia; Cunha, Andrea Correia; Paiva, M. C.; Pontes, A. J.
– Microinjection moulding of polyamide with functionalized carbon nanotubes
, 2010
Livro de atas - Texto completo
Santos, R. M.; Botelho, Gabriela; Machado, A. V.
– Role of ultraviolet absorbers (UVA) and hindered amine light stabilizers (HALS) in ABS stabilization
, 2010
Livro de atas - Texto completo
Sousa, A. M. M.; Sereno, A. M.; Hilliou, L.; Gonçalves, M. P.
– Biodegradable agar extracted from gracilaria vermiculophylla: films properties and application to edible coating
, 2010
Livro de atas - Texto completo
Silva, M. A.; Martinho, P. G.; Pouzada, A. S.
– Warpage of injection mouldings in hybrid moulds with epoxy-aluminium composite core
, 2010
Livro de atas - Texto completo
Teixeira, Cristina; Covas, J. A.; Gaspar-Cunha, A.
– A global modelling program for co-rotating twin-screw extruders
, 2010
Livro de atas - Resumo
Cunha, S. M.; Gaspar-Cunha, A.; Covas, J. A.
– Melting of polymer blends and concomitant morphology development in single screw extruders
, 2010
Livro de atas - Resumo
Sepúlveda, A. T.; Sampaio, M.; Cortez, J.; Pontes, A. J.
– Characterization of micro-mouldings at different processing conditions: microstructure and mechanical properties
, 2010-01
Outro
2009
Machado, A. V.; Antunes, C. F.; Duin, M. van
– Degradation of the rubber network during dynamic vulcanization of EPDM/PP blends using phenolic resol
, 2009
Artigo
Martinho, P. G.; Bártolo, Paulo Jorge; Pouzada, A. S.
– Hybrid moulds : effect of the moulding blocks on the morphology and dimensional properties
, 2009
Artigo
Morelli, Carolina L.; Pouzada, A. S.; Sousa, José Alexandrino
– Influence of hybridization of glass fiber and talc on the mechanical performance of polypropylene composites
, 2009-08-12
Artigo
Machado, A. V.; Almeida, M. F.; Larocca, N. M.; Pessan, L. A.
– Dispersion mechanisms of nanoclays in a polymer matrix by electron microscopy
, 2009
Artigo
Araújo, M. Alberta; Cunha, A. M.; Mota, M.
– Enzymatic degradation of starch thermoplastic blends using samples of different thickness
, 2009-02
Artigo
Hilliou, L.; Wilhelm, Manfred; Yamanoi, Mikio; Gonçalves, Maria P.
– Structural and mechanical characterization of kappa/iota-hybrid carrageenan gels in potassium salt using Fourier Transform rheology
, 2009
Artigo
Cunha, S. M.; Gaspar-Cunha, A.; Covas, J. A.
– Melting of polymer blends in single-screw extrusion : an experimental study
, 2009
Artigo
Velosa, J. C.; Nunes, J. P.; Antunes, P. J.; Silva, J. F.; Marques, A. T.
– Development of a new generation of filament wound composite pressure cylinders
, 2009
Artigo
Machado, A. V.; Yquel, Virginie; Covas, J. A.; Flat, Jean.-Jacques
– Contribution of the melting stage to the evolution of the morphology and chemical conversion of immiscible polyamide/polyethylene blends in twin-screw extruders
, 2009
Artigo
Vasco, Joel Oliveira Correia; Maia, J. M.; Pouzada, A. S.
– Thermo-rheological behaviour of polymer melts in microinjection moulding
, 2009-09-17
Artigo
Costa, José Carlos Gomes; Oliveira, M.; Machado, A. V.; Lanceros-Méndez, S.; Botelho, Gabriela
– Effect of antistatic additives on mechanical and electrical properties of polyethylene foams
, 2009
Artigo
Matias, João Manuel; Bártolo, Paulo Jorge; Pontes, A. J.
– Modeling and simulation of photofabrication processes using unsaturated polyester resins
, 2009
Artigo
Machado, A. V.; Antunes, C. F.; Duin, M. van
– Phase inversion phenomena of EPDM /PP : based TPVs by Electronic Microscopy
, 2009
Artigo
Hilliou, L.; Freitas, Filomena; Oliveira, Rui; Reis, Maria A.M.; Lespineux, David; Grandfils, Christian; Alves, Vítor D.
– Solution properties of an exopolysaccharide from a Pseudomonas strain obtained using glycerol as sole carbon source
, 2009
Artigo
Proença, M. Fernanda R. P.; Araújo, R. F.; Paiva, M. C.; Silva, Carlos J. R.
– The diels-alder cycloaddition reaction in the functionalization of carbon nanofibers
, 2009-10-01
Artigo
Pouzada, A. S.
– Hybrid moulds : a case of integration of alternative materials and rapid prototyping for tooling
, 2009
Artigo
Fangueiro, Raúl; Nunes, J. P.; Soutinho, Hélder Filipe Cunha; Araújo, Mário Duarte de
– Development of fibrous preforms for frp tube connections
, 2009
Artigo
Villanueva, R.D.; Hilliou, L.; Sousa-Pinto, I.
– Postharvest culture in the dark: An eco-friendly alternative to alkali treatment for enhancing the gel quality of κ/ι-hybrid carrageenan from Chondrus crispus (Gigartinales, Rhodophyta)
, 2009
Artigo
Covas, J. A.; Gaspar-Cunha, A.
– Extrusion scale-up : an optimization-based methodology
, 2009
Artigo
Machado, A. V.; Covas, J. A.; Bounor-Legare, V.; Cassagnau, P.
– Reactive polymer processing and design of stable micro- and nanostructures
, 2009
Capítulos de Livros
Pontes, A. J.; Minas, Graça; Cunha, Joaquim; Cortez, João
– Micromisturador polimérico descartável e sua aplicação em microsistemas laboratoriais
, 2009
Patentes
Bessa, Paulo C.
– Novel biodegradable drug delivery systems for the controlled release of growth factors in bone healing and tissue engineering
, 2009-12-21
Teses de Doutoramento
Martins, Manuel Rodrigues
– Desenvolvimento de tecnologia de extrusão para indução de microestrutura controlada em materiais poliméricos
, 2009-12-18
Teses de Doutoramento
Krasteva, Diana Lubomirova
– Integrated prediction of processing and thermomechanical behavior of long fiber thermoplastic composites
, 2009-10-19
Teses de Doutoramento
Silva, Jorge M.
– The role of interfacial elasticity on the rheological behaviour of polymer blends
, 2009-07-30
Teses de Doutoramento
Fernandes, Carla Sofia Veiga
– Optimização do projecto e desempenho de permutadores de calor de placas para fluídos alimentares
, 2009-10-30
Teses de Doutoramento
Oliveira, João Manuel Teixeira de
– New 3D scaffolds and adequate mesenchymal stem cells culture methodologies for engineering an articular cartilage transplant
, 2009-03-20
Teses de Doutoramento
Sousa, Ana Margarida Martins de
– Stimulus responsive smart supports and scaffold/cell constructs for bone tissue engineering
, 2009-11-09
Teses de Doutoramento
Rebelo, Patrícia Alexandra da Cunha
– Degradação catalítica do polietileno
, 2009-12-11
Teses de Mestrado
Santos, Liliana R.
– Avaliação da eficiência da separação de plásticos de resíduos sólidos urbanos por métodos de dissolução selectiva
, 2009-10-29
Jiménez, L.; Rocha, A. M.; Aranberri, I.; Covas, J. A.; Catarino, André P.
– Electrically conductive monofilaments for smart textiles
, 2009
Livro de atas - Texto completo
Mould, Sacha Trevelyan; Barbas, Joana Margarida; Nóbrega, J. M.; Machado, A. V.; Covas, J. A.
– Recent developments on on-line rheometry to monitor the extrusion process
, 2009-01
Livro de atas - Texto completo
Gama, Sílvio M. A.; Fernandes, Célio Bruno Pinto; Gaspar-Cunha, A.
– Métodos espectrais aplicados ao filme de fundido de um processo de extrusão de Polímeros
, 2009
Livro de atas - Texto completo
Fernandes, Célio Bruno Pinto; Pontes, A. J.; Viana, J. C.; Gaspar-Cunha, A.
– Using multi-objective evolutionary algorithms in the optimization of polymer injection molding
, 2009
Livro de atas - Texto completo
Covas, J. A.; Gaspar-Cunha, A.
– Use of multi-objective evolutionary algorithms in extrusion scale-up
, 2009