2011

Pinto, A. R. – Potential of human bone marrow derived stem cells combined with chitosan based biodegradable scaffolds for bone tissue engineering , 2011-02-18

Pereira, Sílvia Cristina Gomes – Genetically engineered new spider silk chimeras for bone regeneration , 2011-04-08

Rodrigues, Márcia T. – Development of tissue engineered strategies combining stem cells and scaffolds aimed to regenerate bone and osteochondral interfaces , 2011-12-05

Lourenço, Bianca do Nascimento – Cells behavior on superhydrophobic surfaces with different topographies , 2011

Afonso, David Losa de Areia – Fish scales as model for osteogenic cells culture , 2011

Silva, Joana Maria Marques – Nanostructured 3D constructs based on chitosan and chondroitin sulphate multilayers for cartilage tissue engineering , 2011

Leal, Ana Isabel – Asymmetric PDLLA membranes containing Bioglass® for guided tissue regeneration , 2011

Sousa, Nuno André Carvalho – Patterned surfaces of poly (lactic acid) and starch – poly (lactic acid) blend prepared by reverse breath figures, the effect of : solvent, substrate and vapour , 2011

Machado, A. V.; Antunes, Carla Filipa; Duin, M. van – Phase inversion of EPDM/PP blends : effect of viscosity ratio , 2011

Covas, J. A.; Novais, R. M.; Paiva, M. C. – A comparative study of the dispersion of carbon nanofibres in polymer melts , 2011

Sepúlveda, A. T.; Fachin, F.; Guzmán de Villoria, R.; Wardle, B. L.; Viana, J. C.; Pontes, A. J.; Rocha, Luís A. – Nanocomposite flexible pressure sensor for biomedical applications , 2011

Santos, Isa C. T.; Gazelle, G. Scott; Rocha, Luís A.; Tavares, João Manuel R. S. – Desenvolvimento de dispositivos médicos: vantagens de uma metodologia dedicada , 2011-09-04

Cunha, S. M.; Gaspar-Cunha, A.; Covas, J. A. – Morphology development of immiscible polymer blends during melting in single-screw extruders : effect of composition and compatibilization , 2011

Barbas, J. M.; Machado, A. V.; Covas, J. A. – Near-infrared spectroscopy for the on-line characterization of nanocomposites , 2011-05

Thepthong, S.; Hilliou, L.; Covas, J. A. – In-line rheo-optical characterization of extruded complex fluids , 2011-09

Bernardo, Gabriel; Shofner, Meisha; Bucknall, David G. – Solid state processing of conjugated polymer-fullerene blends , 2011

Gomes, C. F. S.; Martins, Carla I.; Viana, J. C. – Structure evolution during deformation of novel polymer systems based on poly(ethylene terephthalate) reinforced with inorganic particles , 2011

Zhiltsova, T. V.; Oliveira, M. S. A.; Vasco, Joel Oliveira Correia; Pouzada, A. S.; Pontes, A. J. – Influence of mesh discretization on the prediction of polymer flow behaviour in microcavities , 2011

Ferrás, Luís Jorge Lima; Nóbrega, J. M.; Pinho, F. T.; Carneiro, O. S. – On the effect of the wall slip boundary conditon , 2011-10

Rocha, Luís A.; Silva, C. S.; Cerqueira, M. F.; Ribeiro, J. F.; Gonçalves, L. M.; Pontes, A. J.; Viana, J. C. – A microinjected 3-axis thermal accelerometer , 2011

Sepúlveda, A. T.; Santos, Isa C. T.; Fachin, F.; Guzmán de Villoria, R.; Wardle, B. L.; Pontes, A. J.; Viana, J. C.; Rocha, Luís A. – Design of a pressure sensor for monitoring of post-endovascular aneurysm repair , 2011-01-26

Bernardo, Gabriel; Bucknall, David G.; Shofner, Meisha; Sumpter, Bobby; Karim, Alamgir; Nabankur, Deb; Raghavan, Dharmaraj; Sides, Scott; Huq, Abul – Phase-morphology and molecular structure correlations in model fullerene-polymer nanocomposites , 2011

Silva, Marco Aurélio Pinto; Martins, R. S.; Nóbrega, J. M.; Carvalho, Helder; Lanceros-Méndez, S. – Effect of the processing conditions on the mechanical and electrical properties of extruded conductive PP tape and filament , 2011-04

Garcia, M. C. R.; Pettarin, Valeria; Viana, J. C.; Pontes, A. J.; Frontini, P. M.; Pouzada, A. S. – Synergistic effects of nanoclay and Short Glass polypropylene composites , 2011

Teixeira, Pedro; Pontes, A. J.; Henriques, Elsa – Effect of the Injection moulding processing conditions on biopolymers final properties , 2011

Mould, Sacha Trevelyan; Pereira, S. P.; Nóbrega, J. M.; Machado, A. V.; Covas, J. A. – On-line rheometry: a tool to monitor polymer nanocomposites production , 2011

Garcia, M. C. R.; Fasce, L.; Pettarin, Valeria; Viana, J. C.; Pontes, A. J.; Frontini, P. M.; Pouzada, A. S. – Synergistic effects of nanoclay and SGF on tribological and dynamic properties of polypropylene composites , 2011

Mirkhalaf, Mohsen; Pires, Francisco; Simões, Ricardo – An efficient numerical integration algorithm for the single mode compressible leonov model , 2011-09

Dias, R. A.; Wolffenbuttel, R. F.; Cretu, E.; Rocha, Luís A. – Sensitivity linearization technique for a time based MEMS accelerometer , 2011-06-05

Nóbrega, J. M.; Ferreira, A.; Costa, Pedro; Carvalho, Helder; Sencadas, Vítor João Gomes Silva; Lanceros-Méndez, S. – Production of electroactive filaments by coextrusion , 2011-04

Gaspar-Cunha, A.; Loyens, Dirk; Hattum, F. W. J. van – Aesthetic design using multi-objective evolutionary algorithms , 2011

Sampaio, Álvaro M.; Pontes, A. J.; Simões, Ricardo – Ergonomic evaluation in product design for surgical instruments traceability , 2011-10

Michelangelli, O. P.; Yamanoi, M.; Gaspar-Cunha, A.; Covas, J. A. – Flow dynamics and structure of solid pellets along the channel of a single screw extruder , 2011

Tecknik, J.; Brito, A. M.; Pouzada, A. S.; Martins, Carla I. – Influence of the injection rate and mould block material of hybrid moulds on the morphological development of PP parts , 2011

Garcia, M. C. R.; Netto, A. C. S.; Pontes, A. J. – Model to predict shrinkage and ejection forces of injection moulded tubular parts of short glass fiber reinforced thermoplastics , 2011

Santos, Isa C. T.; Tavares, João Manuel R. S.; Rocha, Luís A. – Concept selection in the development of medical devices: the case of the smart stent-graft , 2011-04-12

Rajaraman, V.; Hau, B. S.; Rocha, Luís A.; Dias, R. A.; Makinwa, K. A. A.; Dekker, R. – A novel SOI-MEMS ‘Micro- Swing’ time-accelerometer operating in two time-based transduction modes for high sensitivity and extended range , 2011-06-05

Pereira, A. G.; Vieira, M. T.; Pontes, A. J. – Processing of conductive filled polymers using microinjection , 2011

Neves, A. F.; Salmoria, Gean; Ahrens, Carlos; Pouzada, A. S.; Silva, M. A. – Assessment of injection moulded parts of PP/nanoclay produced with hybrid moulds , 2011

Lopes, João Pedro; Correia, Alexandre; Silva, Jaime; Pires, Francisco; Lanceros-Méndez, S.; Simões, Ricardo – Modelação computacional multiescala de materiais poliméricos : comportamento mecânico à mesoescala , 2011-09

Nascimento, Filipe; Silva, Eduarda; Sá, Ricardo; Sabaleuski, Anton; Ribeiro, Jorge; Faro, Tiago; Simões, Ricardo – Structured approach for strategic planning in complex systems: methodology and company-based case study , 2011-03

Dias, R. A.; Wolffenbuttel, R. F.; Cretu, E.; Rocha, Luís A. – Noise analysis of a micro-G pull-in time accelerometer , 2011-06-19

Oliveira, Cristina; Silva, José Machado da; Rocha, Luís A. – Test of a stent-graft endoleakage monitor , 2011-11-16

Martins, Carla I.; Lima, F. A.; Duarte, F. M. – Study of welding strengh in PVC profiles , 2011

Barros, G.; Pontes, A. J.; Cortez, J.; Sampaio, M. – Study of the adhesion on overmoulded parts with thermoplastic/LSR combination , 2011

Martins, R. S.; Silva, Marco Aurélio Pinto; Carneiro, O. S.; Rocha, J. G.; Nóbrega, J. M.; Carvalho, Helder; Lanceros-Méndez, S. – Electroactive tape extrusion : influence of processing conditions on the β-phase content of PVDF samples , 2011-04

Covas, J. A.; Almeida, M. F.; Machado, A. V.; Larocca, N. M.; Pessan, L. A. – Nanoclays dispersion in a PA6/PP blend by twin screw compounding , 2011

Nunes, J. P.; Silva, J. F. – Production of thermoplastic matrix towpregs for higly demanding and cost - effective commercial applications , 2011-04

Nunes, J. P.; Silva, J. F. – Processing thermoplastic matrix towpregs by pultrusion , 2011-06

Sepúlveda, A. T.; Pontes, A. J.; Viana, J. C.; Guzmán de Villoria, R.; Fachin, F.; Wardle, B. L.; Rocha, Luís A. – Flexible sensor for blood pressure measurement , 2011-08-30