2021

Fakhari, Ahmad; Tukovic, Zeljko; Carneiro, O. S.; Fernandes, C. – An effective interface tracking method for simulating the extrudate swell phenomenon , 2021-04

Jervis, Peter John; Hilliou, L.; Pereira, Renato B.; Pereira, David M.; Martins, J. A. R.; Ferreira, Paula M. T. – Evaluation of a model photo-caged dehydropeptide as a stimuli-responsive supramolecular hydrogel , 2021-03-11

Franco, M.; Correia, V.; Marques, P.; Sousa, F.; Silva, R.; Figueiredo, B. R.; Bernardes, Adriana; Silva, Rui P. Silva; Lanceros-Méndez, S.; Costa, Pedro Filipe Ribeiro – Environmentally friendly Graphene-Based conductive inks for multitouch capacitive sensing surfaces , 2021-09-06

Veloso, Sérgio R S; Silva, Joana F G; Hilliou, L.; Moura, Cacilda; Coutinho, Paulo J. G.; Martins, J. A. R.; Testa-Anta, Martín; Salgueiriño, Verónica; Correa-Duarte, Miguel A; Ferreira, Paula M. T.; Castanheira, Elisabete M. S. – Impact of citrate and lipid-functionalized magnetic nanoparticles in dehydropeptide supramolecular magnetogels: properties, design and drug release , 2021

Melendez-Rodriguez, Beatriz; Torres-Giner, Sergio; Angulo, Inmaculada; Pardo-Figuerez, Maria; Hilliou, L.; Escuin, Jose Manuel; Cabedo, Luis; Nevo, Yuval; Prieto, Cristina; Lagaron, Jose Maria – High-oxygen-barrier multilayer films based on polyhydroxyalkanoates and cellulose nanocrystals , 2021-05-30

Hilliou, L. – Structure-elastic properties relationships in gelling carrageenans , 2021-11-26

Amorim, Luís Manuel Machado; Santos, Ana Raquel Ribeiro; Nunes, J. P.; Dias, Gustavo R.; Viana, J. C. – Quasi static mechanical study of vacuum bag infused bouligand inspired composites , 2021-06-06

Veloso, Sérgio R. S.; Jervis, Peter J.; Silva, Joana F. G.; Hilliou, L.; Moura, C.; Pereira, David M; Coutinho, Paulo J. G.; Martins, J. A.; Castanheira, Elisabete M. S.; Ferreira, Paula M. T. – Supramolecular ultra-short carboxybenzyl-protected dehydropeptide-based hydrogels for drug delivery , 2021-03

Amorim, Luís Manuel Machado; Santos, Ana Raquel Ribeiro; Nunes, J. P.; Viana, J. C. – Bioinspired approaches for toughening of fibre reinforced polymer composites , 2021

Sampaio, Sandra Cristina Fernandes Monteiro; Viana, J. C. – Optimisation of the green synthesis of Cu/Cu2O particles for maximum yield production and reduced oxidation for electronic applications , 2021-01

Gonçalves, Renato Ferreira; Dias, Pedro; Hilliou, L.; Costa, Pedro; Silva, Maria M.; Costa, Carlos Miguel Silva; Corona-Galván, Sergio; Lanceros-Méndez, S. – Optimized printed cathode electrodes for high performance batteries , 2021-01

Oliveira, Filipa M.; Dencheva, Nadya Vasileva; Denchev, Z.; Silva, Filipe S.; Carvalho, Óscar; Moura, Caroline G. – Patterned electroconductive networks in Ag-polyamide 6 composites by laser ablation , 2021-07-16

Costa, Ricardo Daniel Pereira da; Nóbrega, J. M.; Clain, Stéphane; Machado, Gaspar J. – Efficient very high-order accurate polyhedral mesh finite volume scheme for 3D conjugate heat transfer problems in curved domains , 2021-11

Aali, Mohammadreza; Fernandes, C.; Carneiro, O. S.; Nóbrega, J. M. – Using computational modelling to study extensional rheometry tests for inelastic fluids , 2021-12

Dias, Daniela; Vale, A. Catarina; Cunha, Eunice Paula Freitas; Paiva, M. C.; Reis, R. L.; Vaquette, Cedryck; Alves, N. M. – 3D‐printed cryomilled poly(ε‐caprolactone)/graphene composite scaffolds for bone tissue regeneration , 2021

Gaspar, Hugo; Parnell, Andrew J.; Pérez, Gabriel E.; Viana, J. C.; King, Stephen M.; Mendes, Adélio; Pereira, Luiz; Bernardo, Gabriel – Graded morphologies and the performance of PffBT4T-2OD:PC71BM devices using additive choice , 2021-12-12

Hilliou, L.; Covas, J. A. – In‐process rheological monitoring of extrusion‐based polymer processes , 2021

Gaspar-Cunha, A.; Costa, Paulo; Galuppo, Wagner de Campos; Nóbrega, J. M.; Duarte, F. M.; Costa, Lino – Multi-objective optimization of plastics thermoforming , 2021-07-26

Teixeira, Rafaela Marisa Fernandes; Coelho, Carlos; Oliveira, João; Gomes, Joana; Pinto, Vera Vaz; Ferreira, Maria José; Nóbrega, J. M.; Ferreira da Silva, Alexandre; Carneiro, O. S. – Towards customized footwear with improved comfort , 2021-04-01

Barbosa, João C.; Pinto, Rafael S.; Hilliou, L.; Silva, Maria M.; Costa, Carlos M.; Gonçalves, Renato; Lanceros-Méndez, S. – Poly(vinylidene fluoride-trifluoroethylene-chlorofluoroethylene): A new binder for conventional and printable lithium-Ion batteries , 2021

Ferrás, Luís Jorge Lima; Fernandes, C.; Semyonov, Denis; Nóbrega, J. M.; Covas, J. A. – Dispersion of graphite nanoplates in polypropylene by melt mixing: the effects of hydrodynamic stresses and residence time , 2021

Fernandes, C.; Fakhari, Ahmad; Tukovic, Zeljko – Non-isothermal free-surface viscous flow of polymer melts in pipe extrusion using an open-source interface tracking finite volume method , 2021-12

Rocha, Helena Cristina Lopes; Semprimoschnig, Christopher; Nunes, J. P. – Small-diameter optical fibre sensor embedment for ambient temperature cure monitoring and residual strain evaluation of CFRP composite laminates produced by vacuum assisted resin infusion , 2021

Santos, Ana Raquel; Amorim, Luís; Nunes, J. P.; Silva, Alexandre F.; Viana, J. C. – Aligned carbon nanotube-based sensors for strain monitoring of composites , 2021-07

Rocha, Helena Cristina Lopes; Semprimoschnig, Christopher; Nunes, J. P. – Sensors for process and structural health monitoring of aerospace composites: a review , 2021-04-04

Guerreiro, Miguel; Rompante, Joana; Leite, André Costa; Fernandes, Luís Paulo; Santos, Rosa Maria; Paiva, Maria C.; Covas, J. A. – Development of electrically conductive polymer nanocomposites for the automotive cable industry , 2021

Sampaio, Sandra Cristina Fernandes Monteiro; Viana, J. C. – Green synthesis of Cu<inf>2</inf>O/Cu nanoparticles and conversion to Cu microparticles in one-bath reaction method for improved electrical conductivity , 2021

Ruiz, María P.; Pontes, A. J.; Ludueña, Leandro N. – Isolation of hydrodynamic parameters for the fibre length attrition in injection-moulded short-fibre polymer composites , 2021

Lopes, Ana C.; Sampaio, Álvaro M.; Silva, Cátia Samanta Ribeiro; Pontes, A. J. – Prediction of SLS parts properties using reprocessing powder , 2021

Martins, Luís C.; Barbosa, Carlos N.; Silva, Susana; Bernardo, Pedro; Dias, Gustavo R.; Pontes, A. J. – Effect of processing conditions on electromagnetic shielding and electrical resistivity of injection-molded polybutylene terephthalate compounds , 2021

Gonçalves, Luís Filipe Fernandes Ferreira; Duarte, Fernando M.; Martins, Carla I.; Paiva, Maria C. – Laser welding of thermoplastics: an overview on lasers, materials, processes and quality , 2021

Buga, Cláudia S.; Viana, J. C. – A review on materials and technologies for organic large-area electronics , 2021-06

Cruz, Sílvia Manuela Ferreira; Azevedo, Gabriela; Raya, Clara Maria Cano; Manninen, Nora Kristiina Alves Sousa; Viana, J. C. – Thermoelectric response of a screen printed silver-nickel thermocouple , 2021-02

Silva, Mariana M.; Lopes, Paulo Estevão Caldeira; Li, Yilong; Pötschke, Petra; Ferreira, Fernando; Paiva, M. C. – Polylactic acid/carbon nanoparticle composite filaments for sensing , 2021-03-15

Ferreira, Inês; Babo, Pedro Miguel Sousa; Braga, A. C.; Lopes, Maria Ascensão; Gomes, Manuela E.; Pina-Vaz, Irene – Supplementary solvent irrigation efficacy on filling remnants removal comparing XP-endo Finisher R vs IrriSafe , 2021

Costa, Sidonie F.; Duarte, F. M.; Covas, J. A. – Computer aided definition of the printing conditions of parts made by FFF , 2021

Vanaei, Hamid Reza; Shirinbayan, Mohammadali; Costa, Sidonie Fernandes; Duarte, F. M.; Covas, J. A.; Deligant, Michael; Khelladi, Sofiane; Tcharkhtchi, Abbas – Experimental study of PLA thermal behavior during fused filament fabrication , 2021

Silva, Miguel R.; Pereira, António M.; Sampaio, Álvaro M.; Pontes, A. J. – Assessment of the dimensional and geometric precision of micro-details produced by material jetting , 2021-04

Silva, Eva C.; Sampaio, Álvaro M.; Pontes, A. J. – Evaluation of active heat sinks design under forced convection—effect of geometric and boundary parameters , 2021-04

Silva, M.; Gomes, C.; Pinho, I.; Gonçalves, H.; Vale, A. C.; Covas, J. A.; Alves, N. M.; Paiva, M. C. – Poly(Lactic Acid)/Graphite Nanoplatelet Nanocomposite Filaments for Ligament Scaffolds, Nanomaterials , 2021

Silva, M.; Pinho, I. S.; Covas, J. A.; Alves, N. M.; Paiva, M. C. – 3D printing of graphene-based polymeric nanocomposites for biomedical applications , 2021

Abbass, A.; Paiva, M.C.; Oliveira, D.V.; Lourenço, P.B.; Fangueiro, R. – Insight into the Effects of Solvent Treatment of Natural Fibers Prior to Structural Composite Casting: Chemical, Physical and Mechanical Evaluation , 2021

Gaspar-Cunha, A.; Periaux, Jacques; Giannakoglou, Kyriakos C.; Gauger, Nicolas R.; Quagliarella, Domenico; Greiner, David – Advances in evolutionary and deterministic methods for design, optimization and control in engineering and sciences , 2021

Pinto, Renê Souza; Costa, M. Fernanda P.; Costa, Lino; Gaspar-Cunha, A. – A neuroevolutionary approach to feature selection using multiobjective evolutionary algorithms , 2021

Costa, Lino; Gaspar-Cunha, A. – Multi-objective robustness analysis of the polymer extrusion process , 2021

Pontes, A. J.; Pouzada, A. S. – Processing and product performance , 2021

Reinaldo Meneghini, Ivan; Gadelha Guimarães, Frederico; Gaspar-Cunha, A.; Weiss Cohen, Miri – Incorporation of region of interest in a decomposition-based multi-objective evolutionary algorithm , 2021

Pinto, Renê S.; Silva, Hugo M.; Duarte, Fernando M.; Nunes, João P.; Gaspar-Cunha, A. – Neuroevolutionary multiobjective optimization of injection stretch blow molding process in the blowing phase , 2021

Malheiro, Joana M.; Nunes, J. P. – Simulation of Vacuum Assisted Resin Infusion (VARI) process for the production of composite material parts , 2021

Pontes, A. J.; Pouzada, A. S. – Plastics manufacturing , 2021