Domingues, N.; Gaspar-Cunha, A.; Covas, J. A.
– Modelling of mixing in single screw extruders
, 2006
Livro de atas - Texto completo
Duarte, F. M.; Covas, J. A.
– Multilayer plug assisted thermoforming - concept and practical usefulness
, 2006
Livro de atas - Texto completo
Fangueiro, Raúl; Nunes, J. P.; Silva, J. F.; Araújo, Mário Duarte de; Novais, José Fernando Pinheiro
– Development of GF/PP towpreg woven fabrics for composite reinforcements
, 2006
Livro de atas - Texto completo
Viana, J. C.; Mano, J. F.; Denchev, Z.; Oliveira, M. J.; Cramez, M. C.
– Nanostructure evolution during unixial deformation of PET : a simultaneous WAXS and SAXS study using synchrotron radiation
, 2006
Livro de atas - Texto completo
Machado, A. V.; Silva, M. P.; Sencadas, Vítor João Gomes Silva; Rolo, Anabela G.; Lanceros-Méndez, S.; Botelho, Gabriela
– Influence of the crystallisation kinetics on the microstructural properties of α-PVDF
, 2006
Livro de atas - Texto completo
Peças, Paulo; Henriques, Elsa; Quinas, Pedro; Gomes, Cristina; Pouzada, A. S.; Pontes, A. J.
– A contribution to the Life Cycle Management Application to mould making business
, 2006
Livro de atas - Texto completo
Pontes, A. J.
– eSeSME : serviços electrónicos para PME’s do sector dos plásticos
, 2006
Outro
2005
Machado, A. V.; Bassani, Adriane; Hage Junior, E.; Pessan, L. A.; Covas, J. A.
– Evolução da morfologia de fases de blendas PA6/AES em extrusora de dupla rosca e moldagem por injeção
, 2005
Artigo
Brostow, Witold; Simões, Ricardo
– Tribological and mechanical behavior of metals and polymers simulated by molecular dynamics
, 2005
Artigo
Pontes, A. J.; Pantani, R.; Titomanlio, G.; Pouzada, A. S.
– Ejection force of tubular injection moldings. Part II : a prediction model
, 2005
Artigo
Paiva, M. C.; Zhou, B.; Fernando, K. A. S.; Lin, Y.; Lopes, P. E.; Pennington, W. T.; Kennedy, J. M.; Sun, Y. P.
– Physical and mechanical characterization of functionalized with the matrix polymer
, 2005
Artigo
Álvarez, C.; Nogales, A.; Garcia-Gutièrres, M. C.; Sanz, A.; Denchev, Z.; Fuinari, S. S.; Bruix, M.; Ezquerra, T. A.
– Confined crystallization in phase-separated poly(ethylene terephthalate)/poly(ethylene naphthalene 2,6-dicarboxilate) blends
, 2005
Artigo
Duin, M. van; Machado, A. V.
– EPDM/PE-based thermoplastic vulcanites : crosslinking chemistry and dynamic vulcanisation along the extruder
, 2005
Artigo
Covas, J. A.; Bernardo, C. A.; Carneiro, O. S.; Maia, J. M.; Van Hattum, F. W J; Gaspar-Cunha, A.; Biró, L. P.; Horváth, Z. E.; Kiricsi, I.; Kónya, Z.; Niesz, K.
– Continuous production of polycarbonate-carbon nanotube composites
, 2005
Artigo
Duarte, F. M.; Barroso, V. C.; Maia, J. M.; Covas, J. A.
– A computational study on the influence of the rheological behavior of polystyrene and its blends on their thermoforming ability
, 2005
Artigo
Machado, A. V.; Duin, M. van
– Dynamic vulcanisation of EPDM/PE-based thermoplastic vulcanisates studied along the extruder
, 2005
Artigo
Paiva, M. C.; Mano, J. F.
– Interfacial studies of carbon fibre/polycarbonate composites using dynamic mechanical analysis
, 2005
Artigo
Dencheva, Nadya Vasileva; Nunes, Teresa G.; Oliveira, M. J.; Denchev, Z.
– Microfibrillar composites based on polyamide/polyethylene blends, 1. structure investigations in oriented and isotropic polyamide 6
, 2005-01
Artigo
Klein, Jaroslav; Maia, J. M.; Vicente, A. A.; Domingues, Lucília; Teixeira, J. A.; Juraščík, Martin
– Relationships between hydrodynamics and rheology of flocculating yeast suspensions in a high-cell-density airlift bioreactor
, 2005
Artigo
Vaz, C. M.; Doeveren, P. F. N. M. van; Yilmaz, G.; De Graaf, Leontine A.; Reis, R. L.; Cunha, A. M.
– Processing and characterization of biodegradable soy plastics : effects of crosslinking with glyoxal and thermal treatment
, 2005
Artigo
Araújo, M. Alberta; Ferreira, Eugénio C.; Cunha, A. M.; Mota, M.
– Determination of diffusion coefficients of glycerol and glucose from starch based thermoplastic compounds on simulated physiological solution
, 2005
Artigo
Filipe, Susana A.; Maia, J. M.; Leal, Catarina Rosa; Cidade, Maria Teresa
– A study of Rodrun LC3000/PP blends under different stationary and non-stationary shear conditions : the influence of LCP content and processing temperature
, 2005
Artigo
Filipe, Susana A.; Maia, J. M.; Duarte, Ana; Leal, Catarina Rosa; Cidade, Maria Teresa
– Influence of type of compatibilizer on the rheological and mechanical behaviour of LCP/TP blends under different stationary and nonstationary shear conditions
, 2005
Artigo
Barroso, V. C.; Maia, J. M.
– Time dependent effects on the rupture of molten linear polymers in extension
, 2005
Artigo
Hattum, F. W. J. van; Nunes, J. P.; Bernardo, C. A.
– A theoretical and experimental study of new towpreg-based long fibre thermoplastic composites
, 2005-01
Artigo
Martins, Cristina I.; Cakmak, M.
– Large deformation mechano optical and dynamical phase behavior in uniaxially stretched poly(ethylenenaphthalate)
, 2005
Artigo
Machado, A. V.; Duim, M. van
– EPDM-based thermoplastic vulcanisates : crosslinking chemistry and dynamic vulcanisation along the extruder axis
, 2005
Artigo
Gaspar-Cunha, A.; Viana, J. C.
– Using multi-objective evolutionary algorithms to optimize mechanical properties of injection moulded parts
, 2005
Artigo
Esteves, Ana Catarina C.; Timmons, Ana Margarida Madeira Viegas de Barros; Martins, J. A.; Zhang, W.; Pinto, J. J. C. Cruz; Trindade, Tito
– Crystallization behaviour of new poly(tetramethyleneterephthalamide) nanocomposites containing SiO2 fillers with distinct morphologies
, 2005-01
Artigo
Fernandes, C. S.; Dias, Ricardo P.; Nóbrega, J. M.; Afonso, I. M.; Melo, L. F.; Maia, J. M.
– Simulation of stirred yoghurt processing in plate heat exchangers
, 2005
Artigo
Machado, A. V.; Covas, J. A.
– Monitoring reactive processes along the extruder
, 2005
Artigo
Barroso, V. C.; Maia, J. M.
– Influence of long-chain branching on the rheological behavior of polyethylene in shear and extensional flow
, 2005
Artigo
Dencheva, Nadya Vasileva; Nunes, Teresa G.; Oliveira, M. J.; Denchev, Z.
– Crystalline structure of polyamide 12 as revealed by solid-state 13C NMR and synchrotron WAXS and SAXS
, 2005
Artigo
Nóbrega, J. M.; Carneiro, O. S.; Covas, J. A.
– CAE aplicado ao projecto de sistemas de calibração/arrefecimento para perfis
, 2005
Capítulos de Livros
Apostolov, Anton Atanassov; Samokovlijski, O.; Fakirov, Stoyko; Stribeck, N.; Denchev, Z.; Evstatiev, M.; Friedrich, K.; Funari, S. S.
– Trans-crystallisation with reorientation of polypropylene in drawn PET/PP and PA66/PP blends : part. 1 study with WAXS of synchrotron radiation
, 2005
Capítulos de Livros
Domingues, N.; Gaspar-Cunha, A.; Covas, J. A.
– Modelação da mistura de polímeros em extrusoras monofuso
, 2005
Capítulos de Livros
Covas, J. A.; Gaspar-Cunha, A.
– Projecto assistido por computador de parafusos para extrusoras.
, 2005
Capítulos de Livros
Costa, H. J.; Neiva, J. M.; Cunha, E. M.; Simões, J. F.; Carneiro, O. S.; Covas, J. A.
– Linha de extrusão laboratorial para a produção de filme tubular biorientado
, 2005
Capítulos de Livros
Hattum, F. W. J. van; Leer, C.; Gaspar-Cunha, A.; Bernardo, C. A.
– Aplicação de uma metodologia de optimização na extrusão de compósitos termoplásticos com nanofibras de carbono
, 2005
Capítulos de Livros
Gaspar-Cunha, A.; Covas, J. A.; Pereira, J.; Cerqueira, M. F.; Marreiros, Filipe; Pereira, Pedro
– e-xtruder.net: concepção e desenvolvimento de um sistema automático de modelação e optimização de extrusoras
, 2005
Capítulos de Livros
Nunes, J. P.; Hattum, F. W. J. van; Bernardo, C. A.; Brito, A. M.; Pouzada, A. S.; Silva, J. F.; Marques, A. T.
– Production of thermoplastic towpregs and towpreg-based composites
, 2005
Capítulos de Livros
Gaspar-Cunha, A.; Covas, J. A.; Machado, B.
– Extrusoras de laboratório para actividades de I&D
, 2005
Capítulos de Livros
Carneiro, O. S.; Nóbrega, J. M.
– CAE aplicado ao projecto de cabeças de extrusão
, 2005
Capítulos de Livros
Martinho, P.; Bártolo, P. J.; Queirós, Luís Miguel Pinto de; Pontes, A. J.; Pouzada, A. S.
– Hybrid moulds : the use of combined techniques for the rapid manufacturing of injection moulds
, 2005
Livro de atas - Texto completo
Pontes, A. J.; Gago, P. T.; Bártolo, P. J.; Soares, R.; Pouzada, A. S.
– Hibridmolde: a project towards the new mould generation
, 2005
Outro
Montes-Morán, M. A.; Hattum, F. W. J. van; Nunes, J. P.; Martínez-Alonso, A.; Tascón, J. M. D.; Bernardo, C. A.
– A study of the effect of plasma treatment on the interfacial properties of carbon fibre–thermoplastic composites
, 2005
Carta ao editor
2004
Paiva, M. C.; Zhou, B.; Fernando, K. A. S.; Lin, Y.; Kennedy, J. M.; Sun, Y. P.
– Mechanical and morphological characterization of polymer–carbon nanocomposites from functionalized carbon nanotubes
, 2004-08-14
Artigo
Botelho, Gabriela; Gijsman, P.; Machado, A. V.; Queirós, Arlete
– Laurolactam as a stabilizer against the thermo-oxidative degradation of poly(ether-ester)
, 2004-09
Artigo
Carneiro, O. S.; Nóbrega, J. M.
– Recent developments in automatic die design for profile extrusion
, 2004-11
Artigo
Pontes, A. J.; Pouzada, A. S.
– Ejection force in tubular injection moldings. Part I : effect of processing conditions
, 2004-05