2023

Peixoto, Tânia; Silva, Daniel; Rodrigues, Miguel; Neto, Miguel; Silva, Rui; Paiva, Maria C.; Grenho, Liliana; Fernandes, Maria Helena; Lopes, Maria A. – Amination of polymeric braid structures to improve tendon healing: An experimental comparison , 2023

Rodrigues, Pedro V.; Vieira, Dalila Assunção Maia; Martins, Paola Chaves; Martins, Vilásia Guimarães; Castro, Maria Cidália Rodrigues; Machado, A. V. – Evaluation of active LDPE films for packaging of fresh orange juice , 2023

Rocha, Helena Cristina Lopes; Antunes, Paulo; Lafont, Ugo; Nunes, J. P. – Processing and structural health monitoring of a composite overwrapped pressure vessel for hydrogen storage , 2023-11-07

Esteves, David Seixas; Pereira, Manuel F. C.; Ribeiro, Ana; Durães, Nelson; Paiva, Maria C.; Sequeiros, Elsa W. – Development of MWCNT/Magnetite flexible triboelectric sensors by magnetic patterning , 2023-06-29

Andrade, Mariana A.; Rodrigues, Pedro V.; Barros, Carolina; Cruz, Vasco; Machado, A. V.; Barbosa, Cássia H.; Coelho, Anabela; Furtado, Rosália; Correia, Cristina Belo; Saraiva, Margarida; Vilarinho, Fernanda; Ramos, Fernando; Silva, Ana Sanches – Extending high fatty foods shelf-life protecting from lipid oxidation and microbiological contamination: an approach using active packaging with pomegranate extract , 2023-01-04

Leite, Tiago Maurício; Freitas, Cláudia; Magalhães, Roberto; Ferreira da Silva, Alexandre; Alves, José R.; Viana, J. C.; Delgado, Isabel – Decoupling of temperature and strain effects on optical fiber-based measurements of thermomechanical loaded printed circuit board assemblies , 2023-10-18

Silva, Hugo Miguel Andrade Lopes Figueiredo; Noversa, João Tiago; Fernandes, Leandro; Rodrigues, Hugo Luís; Pontes, A. J. – Design optimization of conformal cooling channels for injection molds: 3D transient heat transfer analysis , 2023-05-03

Bastos, Lourenço; Duarte, F. M.; Viana, J. C.; Silva, Filipe; Nogueira, Miguel; Carneiro, Filipa – A numerical methodology to support the development of liquid adhesive spreading patterns on display bonding process , 2023-09

Pais, Jorge C.; Santos, Caio Rubens; Cabette, Marina; Hilliou, L.; Ribeiro, Jorge; Wang, Hainian; Mohd Hasan, Mohd Rosli – Feasibility of using bio-oil from biodiesel production for bio-bitumen creation , 2023

Sousa, João; Teixeira, Paulo F.; Hilliou, L.; Covas, J. A. – Experimental validation of a micro-extrusion set-up with in-line rheometry for the production and monitoring of filaments for 3D-printing , 2023

Braz, Joana Filipa Barros; Dencheva, Nadya Vasileva; Tohidi, Shafagh Dinparast; Denchev, Z. – Fast, multiple-use optical biosensor for point-of-care glucose detection with mobile devices based on bienzyme cascade supported on polyamide 6 microparticles , 2023-06-24

Silva, Magda Sofia Gonçalves; Pinho, Isabel; Gonçalves, Hugo; Vale, Ana C.; Paiva, Maria C.; Alves, Natália M.; Covas, J. A. – Engineering ligament scaffolds based on PLA/graphite nanoplatelet composites by 3D printing or braiding , 2023-03-07

Guarda, Cátia; Faria, Bruno Miguel Silva; Silvestre, Nuno; Lopes, José N. Canongia – Influence of matrix recrystallization and nanofiller porosity on the interfacial properties of holey graphene-aluminium nanocomposites , 2023-02-25

Capêto, Ana Paula; Amorim, Manuela; Sousa, Sérgio; Costa, Joana R.; Uribe, Braian Esneider Buitrago; Guimarães, Ana Sofia; Pintado, Manuela; Oliveira, Ana L. S. – Fire-resistant bio-based polyurethane foams designed with two by-products derived from sugarcane fermentation process , 2023

Pedroso, Luís D.; Pontes, A. J.; Alves, António; Duarte, F. M.; Carneiro, O. S. – From transparent to opaque: a route towards multifunctional parts injected with a single material , 2023-09-15

Andrade, Mariana A.; Barbosa, Cássia H.; Cerqueira, Miguel A.; Azevedo, Ana Gabriela; Barros, Carolina Lemos; Machado, A. V.; Coelho, Anabela; Furtado, Rosália; Correia, Cristina Belo; Saraiva, Margarida; Vilarinho, Fernanda; Silva, Ana Sanches; Ramos, Fernando – PLA films loaded with green tea and rosemary polyphenolic extracts as an active packaging for almond and beef , 2023-02-03

Maia, Maria Luz; Vieira, Elsa F.; Grosso, Clara; Lopes, Graciliana; Vasconcelos, Vítor; Hilliou, L.; Delerue-Matos, Cristina – Integrated approach applying ultrasound-assisted extraction to recover bioactive material from Chondrus crispus , 2023

Souza, Hiléia K. S.; Kraiem, Wala; Ben Yahia, Amine; Aschi, Adel; Hilliou, L. – From seaweeds to hydrogels: Recent progress in kappa-2 carrageenans , 2023-07-31

Cunha, P.; Teixeira, R.; Carneiro, O. S.; Ferreira da Silva, Alexandre – Multi-material fused filament fabrication: an expedited methodology to assess the affinity between different materials , 2023

Kharrat, Fatma; Chaari, Rania; Khlif, Mohamed; Hilliou, L.; Covas, J. A.; Haboussi, Mohamed; Bradai, Chedly – Bulge test technique and digital image correlation for the determination of the biaxial behavior of polymeric films , 2023

Hammes, Nathalia; Ribeiro, Carolina; Machado, Catarina; Ferreira, João; Campos, Ricardo Emanuel Ribeiro; Faye, Djibril; Cortez, Ana; Melo, Sandra; Duarte, F. M.; Pontes, A. J.; Viana, J. C.; Pedrosa, Paulo Eduardo Teixeira Baptista; Homem, Natália Cândido – Materials screening and characterization for functional printed automotive interiors parts , 2023

Kharrat, F.; Khlif, M.; Hilliou, L.; Covas, J. A.; Haboussi, M.; Bradai, C. – Application of the bulge test combined with 3D-DIC for biaxial characterization of PLA films and defect detection , 2023

Esteves, David Seixas; Durães, Nelson; Pedroso, Rúben; Melo, Amanda; Paiva, Maria C.; Sequeiros, Elsa W. – Fabrication of low electrical percolation threshold multi-walled carbon nanotube sensors using magnetic patterning , 2023-01-21

Martins, Luís C.; Silva, Cátia Samanta Ribeiro; Fernandes, Leandro Cunha; Sampaio, Álvaro M.; Pontes, A. J. – Evaluating the electromagnetic shielding of continuous carbon fiber parts produced by additive manufacturing , 2023-12-08

Carvalho, Daniel; Marques, Sandra Mariana Silva; Siqueira, Giorgia; Ferreira, Armando José Barros; Santos, João; Geraldo, Dulce; Castro, Maria Cidália Rodrigues; Machado, A. V.; Vaz, Filipe; Lopes, Cláudia Jesus Ribeiro – Enhancing the longevity and functionality of Ti-Ag dry electrodes for remote biomedical applications: a comprehensive study , 2023-10-01

Barros, Carolina; Miranda, Sónia; Castro, Olga; Carneiro, O. S.; Machado, A. V. – LDPE-Nanoclay films for food packaging with improved barrier properties , 2023-01-12

Faria, Bruno Miguel Silva; Silvestre, Nuno; Lopes, José N. Canongia Lopes – Tensile and compressive behavior of CHC-Reinforced copper using molecular dynamics , 2023-03-27

Baptista, Rosa Maria Ferreira; Gomes, Clara S. B.; Silva, Bruna Machado; Oliveira, joão; Almeida, B. G.; Castro, Maria Cidália Rodrigues; Rodrigues, Pedro António Veiga; Machado, A. V.; Freitas, Ruben Brandão; Rodrigues, Manuel José Lima Ferreira; de Matos Gomes, Etelvina; Belsley, M. – A polymorph of dipeptide halide glycyl-L-alanine hydroiodide monohydrate: crystal structure, optical second harmonic generation, piezoelectricity and pyroelectricity , 2023-05-12

Abbass, Ali; Paiva, Maria C.; Oliveira, Daniel V.; Lourenço, Paulo B.; Fangueiro, Raúl – Graphene/polyurethane nanocomposite coatings – Enhancing the mechanical properties and environmental resistance of natural fibers for masonry retrofitting , 2023

Matos, Joana; Santos, Sara; Simões, Carla L.; Martins, Carla I.; Simões, Ricardo – Practical application of circularity micro-indicators to automotive plastic parts in an industrial context , 2023

Leite, Tiago Mauricio; Freitas, Claúdia; Magalhães, Roberto; Silva, Alexandre F.; Ferreira da Silva, Alexandre; Alves, José Ricardo; Viana, J. C.; Delgado, Isabel – Temperature calibration for distributed temperature sensing of printed circuit boards using optical fiber sensors , 2023-09

Oliveira, Rui Carlos Mendes de; Viana, J. C.; Sampaio, Paulo – Optical bonding process of flat panel displays and their critical-to-quality factors , 2023-02

Lopes, A. C.; Sampaio, Álvaro M.; Fernandes, F.; Vaz, P. M.; Pontes, A. J. – Design and industrial implementation of a multi-functional part produced by powder bed fusion , 2023-08-30

Matos, Joana; Martins, Carla I.; Simões, Carla L.; Simões, Ricardo João Ferreira – Comparative analysis of micro level indicators for evaluating the progress towards a circular economy , 2023-06

Silva, Magda Sofia Gonçalves; Gomes, Susana; Correia, Cátia Sofia Palma; Peixoto, Daniela; Vinhas, Carla Adriana Araújo; Rodrigues, Márcia T.; Gomes, Manuela E.; Covas, J. A.; Paiva, Maria C.; Alves, N. M. – Biocompatible 3D-printed tendon/ligament scaffolds based on polylactic acid/graphite nanoplatelet composites , 2023-09-08

Rodrigues, Pedro António Veiga; Ramôa, Bruno Manuel Oliveira; Torres, Ana Rita Oliveira; Castro, Maria Cidália Rodrigues; Machado, A. V. – Enhancing the interface behavior on polycarbonate/elastomeric blends: morphological, structural, and thermal characterization , 2023-04-02

Vilaça, Helena; Carvalho, André; Castro, Tarsila Gabriel; Castanheira, Elisabete M. S.; Hilliou, L.; Hamley, Ian; Melle-Franco, Manuel; Ferreira, Paula M. T.; Martins, J. A. R. – Unveiling the role of capping groups in naphthalene N-capped dehydrodipeptide hydrogels , 2023-06-06

Bastos, Lourenço; Alves, Marco; Sousa, Bruno; Vilela, Andreia; Rietter, Luciano; Duarte, F. M.; Carneiro, Filipa; Żmijewska-Rocha, Agnieszka – Transmission laser welding of thermoplastics: influence of welding parameters and rib dimensions on the strength of welded joints , 2023-11

Costa, Ricardo Daniel Pereira da; Clain, Stéphane; Machado, Gaspar J.; Nóbrega, J. M.; Beirão da Veiga, Hugo; Crispo, Francesca – Imposing slip conditions on curved boundaries for 3D incompressible flows with a very high-order accurate finite volume scheme on polygonal meshes , 2023

Simoes, R – Current and Future Opportunities for 3D Printing in Modern Board Games , 2023

Rocha, A.; Sule, E.; Romero, F.; Simoes, R. – Advancing sustainability through efficient production processes: integrating ISO standards, Lean Six Sigma and artificial intelligence , 2023

Santos, Daniela; Baptista, Rosa M. F.; Handa, Adelino; Almeida, B. G.; Rodrigues, Pedro V.; Castro, Cidália; Machado, A. V.; Rodrigues, Manuel J. L. F.; Belsley, M.; de Matos Gomes, Etelvina – Nanostructured electrospun fibers with self-assembled cyclo-L-Tryptophan-L-Tyrosine dipeptide as piezoelectric materials and optical sd harmonic generators , 2023-07-14

Veloso, Sérgio Rafael Silva; Marta, Eva S.; Rodrigues, Pedro V.; Moura, Cacilda; Amorim, Carlos O.; Amaral, Vítor S.; Correa-Duarte, Miguel A.; Castanheira, Elisabete M. S. – Chitosan/alginate nanogels containing multicore magnetic nanoparticles for delivery of doxorubicin , 2023-08-24

Colim, Ana S.; Pereira, Débora; Lima, Pedro; Cardoso, André; Almeida, Rui; Fernandes, Duarte; Mould, Sacha Trevelyan; Arezes, P. – Designing a user-centered inspection device’s handle for the aircraft manufacturing industry , 2023

Fernandes, C.; Faroughi, Salah Aldin; Ferrás, Luís Jorge Lima; Afonso, Alexandre Miguel Prior – Advanced polymer simulation and processing Volume II , 2023-03

Fernandes, C.; Faroughi, Salah Aldin; Ferrás, Luís Jorge Lima; Afonso, Alexandre Miguel Prior – Advanced polymer simulation and processing Volume I , 2023-03

Gaspar-Cunha, A.; Costa, Paulo; Monaco, Francisco; Delbem, Alexandre – Reducing the number of objectives for many-objectives optimization: empirical analysis of a machine learning approach , 2023

Chugh, T.; Gaspar-Cunha, A.; Deutz, A. H.; Duro, J. A.; Oara, D. C.; Rahat, A. – Identifying correlations in understanding and solving many-objective optimisation problems , 2023-07-29

Colim, Ana S.; Alexandre, Rosana; Cardoso, André; Pereira, Débora; Lima, Pedro; Silva, Mariana; Mould, Sacha Trevelyan – Towards the digital transformation of inspection tasks in aircraft manufacturing through a human-centric design , 2023

Rocha, Helena Cristina Lopes – Smart composite parts with multifunctional properties ready to fly , 2023-05-05