Martins, J. A.; Pinto, J. J. C. Cruz
– Non-isothermal crystallisation kinetics with instantaneous nucleation
, 2000
Artigo
Godinho, J. S.; Cunha, A. M.; Crawford, R. J.
– Influence of thermomechanical conditions on structure development and mechanical properties of polyethylene mouldings produced using different moulding methods
, 2000
Artigo
Pontes, A. J.; Pantani, R.; Titomanlio, G.; Pouzada, A. S.
– Solidification Criterion on Shrinkage Predictions for Semi-Crystalline Injection Moulded Samples
, 2000
Artigo
Gordeyev, S. A.; Macedo, F. J.; Ferreira, J. A.; Hattum, F. W. J. van; Bernardo, C. A.
– Transport properties of polymer-vapour grown carbon fibre composites
, 2000
Artigo
Carneiro, O. S.; Maia, J. M.
– Rheological Behavior of (Short) Carbon Fiber/ Thermoplastic Composites. Part II: The Influence of Matrix Type
, 2000
Artigo
Paiva, M. C.; Bernardo, C. A.; Nardin, M.
– Mechanical, surface and interfacial characterisation of pitch and PAN-based carbon fibres
, 2000
Artigo
Godinho, J. S.; Cunha, A. M.; Crawford, R. J.
– Prediction of mechanical properties of polyethylene mouldings based on laminate theory and thermomechanical indices
, 2000
Artigo
Liu, Z. Q.; Cunha, A. M.; Yi, X.-S.; Bernardo, C. A.
– Key Properties to Understand the Performance of Polycarbonate Reprocessed by Injection Molding
, 2000
Artigo
Covas, J. A.; Nóbrega, J. M.; Maia, J. M.
– Rheological measurements along an extruder with an on-line capillary rheometer
, 2000
Artigo
Barros, I.; Teixeira, S. F. C. F.; Teixeira, J. C. F.; Cunha, A. M.
– Evaluation of the thermal behaviour of injection moulds
, 2000
Artigo
Oliveira, M. J.; Hemsley, D. A.
– The Weldability of Polypropylene Strapping Tape
, 2000
Artigo
Carneiro, O. S.; Maia, J. M.
– Rheological Behavior of (Short) Carbon Fiber/ Thermoplastic Composites. Part I: The Influence of Fiber Type, Processing Conditions and Level of Incorporation
, 2000
Artigo
Covas, J. A.; Machado, A. V.; Duin, M. van
– Rheology of PA-6/EPM/EPM-g- MA Blends Along a Twin-Screw Extruder
, 2000
Artigo
Machado, A. V.; Covas, J. A.; van Duin, M.
– Monitoring polyolefin modification along the axis of a twin-screw extruder. II. maleic anhydride grafting
, 2000-09-20
Artigo
Pouzada, A. S.; Rodrigues, A. J. Guimarães
– Case study 11 : a new model for CE in the University of Minho, Portugal
, 2000
Capítulos de Livros
Pouzada, A. S.
– Setting up PBL for design in plastics
, 2000
Capítulos de Livros
Machado, A. V.
– Chemistry, morphology and rheology evolution along the extruder
, 2000
Teses de Doutoramento
Campos, A. R.
– Comportamento de compósitos borracha/cortiça para aplicação em juntas
, 2000
Teses de Mestrado
1999
Hattum, F. W. J. van; Bernardo, C. A.
– A Model to Predict The Strength of Short Fiber Composites
, 1999
Artigo
Macedo, F. J.; Ferreira, J. A.; Hattum, F. W. J. van; Bernardo, C. A.
– Thermal diffusivity measurements of vapour grown carbon fibre composites, using the optical beam deflection technique
, 1999
Artigo
Hattum, F. W. J. van; Bernardo, C. A.; Finegan, J. C.; Tibbetts, G. G.; Alig, R. L.; Lake, M. L.
– A Study of the Thermomechanical Properties of Carbon Fiber–Polypropylene Composites
, 1999
Artigo
Machado, A. V.; Covas, J. A.; Van Duin, M
– Chemical and morphological evolution of PA-6/Epm/Epm-g-MA blends in a twin screw extruder
, 1999-05
Artigo
Machado, A. V.; Covas, J. A.; van Duin, M.
– Evolution of morphology and of chemical conversion along the screw in a corotating twin-screw extruder
, 1999-01
Artigo
Kricheldorf, Hans R.; Denchev, Z.
– Interchange reactions in condensation polymers and their analysis by NMR spectroscopy
, 1999-09
Capítulos de Livros
Hattum, F. W. J. van
– A study of the mechanical properties of vapour grown carbon fibres and carbon fibre-thermoplastic composites
, 1999
Teses de Doutoramento
1998
Caldeira, G.; Maia, J. M.; Carneiro, O. S.; Covas, J. A.; Bernardo, C. A.
– Production and Characterization of Innovative Carbon Fiber-Polycarbonate Composites
, 1998
Artigo
Carneiro, O. S.; Covas, J. A.; Bernardo, C. A.; Caldeira, G.; Hattum, F. W. J. van; Ting, J. -M.; Alig, R. L.; Lake, M. L.
– Production and Assessment of Polycarbonate Composites Reinforced with Vapour-Grown Carbon Fibres
, 1998
Artigo
Paiva, M. C.; Nardin, M.; Edie, D. D.; Bernardo, C. A.
– Ribbon fibres from naphtalene-based mesophase: Surface studies and fibre/matrix interactions in polycarbonate composites
, 1998
Artigo
1997
Paiva, M. C.; Nardin, M.; Bernardo, C. A.; Schultz, J.
– Influence of the Thermal History on the Results of the Fragmentation Test of High Modulus Carbon Fiber-Polycarbonate Model Composites
, 1997-01-22
Artigo
Hattum, F. W. J. van; Benito-Romero, J. M.; Madroñero, A.; Bernardo, C. A.
– Morphological, Mechanical and Interfacial Analysis of Vapour-Grown Carbon Fibres
, 1997
Artigo
Pontes, A. J.; Pinho, A .M.; Miranda, A. S.; Pouzada, A. S.
– Effect of processing conditions on the ejection forces of injection moulds
, 1997
Artigo
Barros, Isabel Maria Ferreira da Costa Soares de
– Modelação do comportamento térmico de moldes de injecção
, 1997
Teses de Mestrado
Hattum, F. W. J. van; Serp, P.; Figueiredo, J. L.; Bernardo, C. A.
– The effect of morphology on the properties of vapour-grown carbon fibres
, 1997