Santos, Isa C. T.; Gazelle, G. Scott; Rocha, Luís A.; Tavares, João Manuel R. S.
– Desenvolvimento de dispositivos médicos: vantagens de uma metodologia dedicada
, 2011-09-04
Conference paper
Cunha, S. M.; Gaspar-Cunha, A.; Covas, J. A.
– Morphology development of immiscible polymer blends during melting in single-screw extruders : effect of composition and compatibilization
, 2011
Conference paper
Barbas, J. M.; Machado, A. V.; Covas, J. A.
– Near-infrared spectroscopy for the on-line characterization of nanocomposites
, 2011-05
Conference paper
Thepthong, S.; Hilliou, L.; Covas, J. A.
– In-line rheo-optical characterization of extruded complex fluids
, 2011-09
Conference paper
Bernardo, Gabriel; Shofner, Meisha; Bucknall, David G.
– Solid state processing of conjugated polymer-fullerene blends
, 2011
Conference paper
Gomes, C. F. S.; Martins, Carla I.; Viana, J. C.
– Structure evolution during deformation of novel polymer systems based on poly(ethylene terephthalate) reinforced with inorganic particles
, 2011
Conference paper
Zhiltsova, T. V.; Oliveira, M. S. A.; Vasco, Joel Oliveira Correia; Pouzada, A. S.; Pontes, A. J.
– Influence of mesh discretization on the prediction of polymer flow behaviour in microcavities
, 2011
Conference paper
Ferrás, Luís Jorge Lima; Nóbrega, J. M.; Pinho, F. T.; Carneiro, O. S.
– On the effect of the wall slip boundary conditon
, 2011-10
Conference paper
Rocha, Luís A.; Silva, C. S.; Cerqueira, M. F.; Ribeiro, J. F.; Gonçalves, L. M.; Pontes, A. J.; Viana, J. C.
– A microinjected 3-axis thermal accelerometer
, 2011
Conference paper
Sepúlveda, A. T.; Santos, Isa C. T.; Fachin, F.; Guzmán de Villoria, R.; Wardle, B. L.; Pontes, A. J.; Viana, J. C.; Rocha, Luís A.
– Design of a pressure sensor for monitoring of post-endovascular aneurysm repair
, 2011-01-26
Conference paper
Bernardo, Gabriel; Bucknall, David G.; Shofner, Meisha; Sumpter, Bobby; Karim, Alamgir; Nabankur, Deb; Raghavan, Dharmaraj; Sides, Scott; Huq, Abul
– Phase-morphology and molecular structure correlations in model fullerene-polymer nanocomposites
, 2011
Conference paper
Rocha, L. A.; Sepúlveda, A. T.; Pontes, A. J.; Viana, J. C.; Santos, Isa C. T.; Tavares, João Manuel R. S.
– Study of pressure sensors placement using an Abdominal Aortic Aneurysm (AAA) model
, 2011
Conference paper
Silva, Marco Aurélio Pinto; Martins, R. S.; Nóbrega, J. M.; Carvalho, Helder; Lanceros-Méndez, S.
– Effect of the processing conditions on the mechanical and electrical properties of extruded conductive PP tape and filament
, 2011-04
Conference paper
Garcia, M. C. R.; Pettarin, Valeria; Viana, J. C.; Pontes, A. J.; Frontini, P. M.; Pouzada, A. S.
– Synergistic effects of nanoclay and Short Glass polypropylene composites
, 2011
Conference paper
Teixeira, Pedro; Pontes, A. J.; Henriques, Elsa
– Effect of the Injection moulding processing conditions on biopolymers final properties
, 2011
Conference paper
Mould, Sacha Trevelyan; Pereira, S. P.; Nóbrega, J. M.; Machado, A. V.; Covas, J. A.
– On-line rheometry: a tool to monitor polymer nanocomposites production
, 2011
Conference paper
Garcia, M. C. R.; Fasce, L.; Pettarin, Valeria; Viana, J. C.; Pontes, A. J.; Frontini, P. M.; Pouzada, A. S.
– Synergistic effects of nanoclay and SGF on tribological and dynamic properties of polypropylene composites
, 2011
Conference paper
Mirkhalaf, Mohsen; Pires, Francisco; Simões, Ricardo
– An efficient numerical integration algorithm for the single mode compressible leonov model
, 2011-09
Conference paper
Dias, R. A.; Wolffenbuttel, R. F.; Cretu, E.; Rocha, Luís A.
– Sensitivity linearization technique for a time based MEMS accelerometer
, 2011-06-05
Conference paper
Nóbrega, J. M.; Ferreira, A.; Costa, Pedro; Carvalho, Helder; Sencadas, Vítor João Gomes Silva; Lanceros-Méndez, S.
– Production of electroactive filaments by coextrusion
, 2011-04
Conference paper
Gaspar-Cunha, A.; Loyens, Dirk; Hattum, F. W. J. van
– Aesthetic design using multi-objective evolutionary algorithms
, 2011
Conference paper
Sampaio, Álvaro M.; Pontes, A. J.; Simões, Ricardo
– Ergonomic evaluation in product design for surgical instruments traceability
, 2011-10
Conference paper
Michelangelli, O. P.; Yamanoi, M.; Gaspar-Cunha, A.; Covas, J. A.
– Flow dynamics and structure of solid pellets along the channel of a single screw extruder
, 2011
Conference paper
Tecknik, J.; Brito, A. M.; Pouzada, A. S.; Martins, Carla I.
– Influence of the injection rate and mould block material of hybrid moulds on the morphological development of PP parts
, 2011
Conference paper
Garcia, M. C. R.; Netto, A. C. S.; Pontes, A. J.
– Model to predict shrinkage and ejection forces of injection moulded tubular parts of short glass fiber reinforced thermoplastics
, 2011
Conference paper
Santos, Isa C. T.; Tavares, João Manuel R. S.; Rocha, Luís A.
– Concept selection in the development of medical devices: the case of the smart stent-graft
, 2011-04-12
Conference paper
Rajaraman, V.; Hau, B. S.; Rocha, Luís A.; Dias, R. A.; Makinwa, K. A. A.; Dekker, R.
– A novel SOI-MEMS ‘Micro- Swing’ time-accelerometer operating in two time-based transduction modes for high sensitivity and extended range
, 2011-06-05
Conference paper
Pereira, A. G.; Vieira, M. T.; Pontes, A. J.
– Processing of conductive filled polymers using microinjection
, 2011
Conference paper
Neves, A. F.; Salmoria, Gean; Ahrens, Carlos; Pouzada, A. S.; Silva, M. A.
– Assessment of injection moulded parts of PP/nanoclay produced with hybrid moulds
, 2011
Conference paper
Lopes, João Pedro; Correia, Alexandre; Silva, Jaime; Pires, Francisco; Lanceros-Méndez, S.; Simões, Ricardo
– Modelação computacional multiescala de materiais poliméricos : comportamento mecânico à mesoescala
, 2011-09
Conference paper
Nascimento, Filipe; Silva, Eduarda; Sá, Ricardo; Sabaleuski, Anton; Ribeiro, Jorge; Faro, Tiago; Simões, Ricardo
– Structured approach for strategic planning in complex systems: methodology and company-based case study
, 2011-03
Conference paper
Dias, R. A.; Wolffenbuttel, R. F.; Cretu, E.; Rocha, Luís A.
– Noise analysis of a micro-G pull-in time accelerometer
, 2011-06-19
Conference paper
Oliveira, Cristina; Silva, José Machado da; Rocha, Luís A.
– Test of a stent-graft endoleakage monitor
, 2011-11-16
Conference paper
Martins, Carla I.; Lima, F. A.; Duarte, F. M.
– Study of welding strengh in PVC profiles
, 2011
Conference paper
Barros, G.; Pontes, A. J.; Cortez, J.; Sampaio, M.
– Study of the adhesion on overmoulded parts with thermoplastic/LSR combination
, 2011
Conference paper
Martins, R. S.; Silva, Marco Aurélio Pinto; Carneiro, O. S.; Rocha, J. G.; Nóbrega, J. M.; Carvalho, Helder; Lanceros-Méndez, S.
– Electroactive tape extrusion : influence of processing conditions on the β-phase content of PVDF samples
, 2011-04
Conference paper
Covas, J. A.; Almeida, M. F.; Machado, A. V.; Larocca, N. M.; Pessan, L. A.
– Nanoclays dispersion in a PA6/PP blend by twin screw compounding
, 2011
Conference paper
Nunes, J. P.; Silva, J. F.
– Production of thermoplastic matrix towpregs for higly demanding and cost - effective commercial applications
, 2011-04
Conference paper
Nunes, J. P.; Silva, J. F.
– Processing thermoplastic matrix towpregs by pultrusion
, 2011-06
Conference paper
Sepúlveda, A. T.; Pontes, A. J.; Viana, J. C.; Guzmán de Villoria, R.; Fachin, F.; Wardle, B. L.; Rocha, Luís A.
– Flexible sensor for blood pressure measurement
, 2011-08-30
Conference paper
Dias, R. A.; Cretu, E.; Wolffenbuttel, R. F.; Rocha, Luís A.
– Squeeze-film damper design with air channels : experimental verification
, 2011
Conference paper
Leite, Janaina L.; Salmoria, Gean; Ahrens, Carlos; Pouzada, A. S.
– Characterization of epoxy/steel fibres composites for hybrid injection moulds
, 2011-04
Conference paper
Esteves, F. R.; Pouzada, A. S.; Martins, Carla I.
– Formulation and characterization of polypropylene structural foam for large parts
, 2011
Conference paper
Hilliou, L.; Covas, J. A.
– EURHEO: the Erasmus Mundus Master in Engineering Rheology
, 2011-09
Conference paper
Barbosa, C. N.; Chabert, F.; Nassiet, V.; Viana, J. C.; Pereira, Paulo A. A.
– Effect of clay amounts on morphology and mechanical performances in multiscale PET composites
, 2011
Conference paper
Correia, Alexandre; Valashani, S. Mohsen; Pires, Francisco; Simões, Ricardo
– Modelling the mechanical behavior of polymer-based nanocomposites
, 2011-04
Conference paper
Jamali, S.; Hilliou, L.; Covas, J. A.
– Effect of thermomechanical history on final properties of carbon nanotube-polymer composites
, 2011-09
Conference paper
Carneiro, O. S.; Covas, J. A.; Domingues, C.
– Correlations between processing conditions, structure and properties of bi-oriented blown films
, 2011
Conference paper
Santos, Isa C. T.; Tavares, João Manuel R. S.; Sepúlveda, A. T.; Pontes, A. J.; Viana, J. C.; Rocha, Luís A.
– Development of a flexible pressure sensor for measurement of endotension
, 2011
Conference paper
Terroso, Miguel; Simões, Ricardo
– Local co-education in industrial design and product development: a real case simulation – five teams, five companies
, 2011-09