Paiva, M. C.
– Chemical functionalization of carbon nanotubes for the dispersion in polymer matrices
, 2009-11
Lecture
2008
Denchev, Z.
– Polyolefin blends
, 2008
Article
Nóbrega, J. M.; Carneiro, O. S.; Gaspar-Cunha, A.; Gonçalves, N. D.
– Design of calibrators for profile extrusion: optimizing multi-step systems
, 2008
Article
Hilliou, L.; Vlassopoulos, D.; Pispas, S.; Hadjichristidis, N.
– A rheo-optical study of stress-fluctuations coupling in a disordered and entangled diblock copolymer solution
, 2008-05
Article
Antunes, P. J.; Dias, Gustavo R.; Nunes, J. P.; Hattum, F. W. J. van; Oliveira, T.
– Finite element modelling of thermoplastic matrix composite gas cylinders
, 2008
Article
Carneiro, O. S.; Reis, R. L.; Covas, J. A.
– Small-Scale Production of Co-Extruded Biaxially Oriented Blown Film
, 2008
Article
Bareta, D. R.; Costa, C. A.; Zattera, A. J.; Pouzada, A. S.
– Influência de materiais alternativos nas propriedades de peças tubulares no contexto de moldes protótipo de injeção
, 2008
Article
Rodrigues, A. L.; Brito, A. G.; Janknecht, P.; Silva, J.; Machado, A. V.; Nogueira, R.
– Characterization of biofilm formation on a humic material
, 2008-11
Article
Covas, J. A.; Maia, J. M.; Machado, A. V.; Costa, P.
– On-line rotational rheometry for extrusion and compounding operations
, 2008
Article
Machado, A. V.; Legare, Véronique Bounor; Gonçalves, N. D.; Melis, F.; Cassagnau, P.; Michel, A.
– Continuous polymerization of e-caprolactone initiated by titanium phenoxide in a twin-screw extruder
, 2008-12
Article
Chappé, J. M.; Carvalho, P.; Lanceros-Méndez, S.; Vasilevskiy, Mikhail; Vaz, F.; Machado, A. V.; Fenker, M.; Kappl, H.; Parreira, N. M. G.; Cavaleiro, A.; Alves, E.
– Influence of air oxidation on the properties of decorative NbOxNy coatings prepared by reactive gas pulsing
, 2008
Article
Silva, J. F.; Nunes, J. P.; Marques, A. T.; Bernardo, C. A.; Vieira, P.; Vasconcelos, M.
– Novos termoplásticos reforçados com fibras longas
, 2008
Article
Duarte, F. M.; Covas, J. A.
– A multilayer plug concept to enhance thickness distribution control of deep thermoformed parts
, 2008
Article
Afonso, I. M.; Cruz, P.; Maia, J. M.; Melo, L. F.
– Simplified numerical simulation to obtain heat transfer correlations for stirred yoghurt in a plate heat exchanger
, 2008
Article
Denchev, Z.; Dencheva, Nadya Vasileva
– Transforming polymer blends into composites : a pathway towards nanostructured materials
, 2008
Article
Ghosh, Satyabrata; Viana, J. C.; Reis, R. L.; Mano, J. F.
– Oriented morphology and enhanced mechanical properties of poly(L-lactic acid) from shear controlled orientation in injection molding
, 2008
Article
Gaspar-Cunha, A.; Covas, J. A.
– Robustness in multi-objective optimization using evolutionary algorithms
, 2008-01
Article
Chappé, J. M.; Carvalho, P.; Machado, A. V.; Vaz, F.; Alves, E.; Barradas, N. P.; Fenker, M.; Kappl, H.
– Structural study of the oxidation process and stability of NbOxNy coatings
, 2008
Article
Barroso, Eva Guiomar Gonçalves; Duarte, F. M.; Couto, M.; Maia, J. M.
– A Rheological Study of the Ageing of Emulsion and Microsuspension-Based PVC Plastisols
, 2008-07
Article
Dencheva, Nadya Vasileva; Denchev, Z.; Oliveira, M. J.; Nunes, Teresa G.; Funari, S. S.
– Relationship between the crystalline structure and mechanical behavior in isotropic and oriented polyamide 12
, 2008
Article
Denchev, Z.; Tomanova, M.; Lederer, A.
– On the anionic homo- and co-polymerization of ethyl-and butyl-2-cyanoacrylates
, 2008
Article
Domingues, N.; Gaspar-Cunha, A.; Covas, J. A.
– Global mixing indices for single screw extrusion
, 2008
Article
Ghosh, Satyabrata; Viana, J. C.; Reis, R. L.; Mano, J. F.
– Bi-layered constructs based on poly(L-lactic acid) and starch for tissue engineering of osteochondral defects
, 2008
Article
Gomes, M.; Viana, J. C.; Pontes, A. J.
– Moldação por injecção de polímeros incompatíveis
, 2008
Article
Fernandes, C. S.; Dias, R.; Nóbrega, J. M.; Maia, J. M.
– Friction factors of power-law fluids in chevron-type plate heat exchangers.
, 2008
Article
Larontonda, F. D. S.; Hilliou, L.; Gonçalves, M. P.; Sereno, A. M.
– From low value renewable resources to green biomaterials for edible coating applications
, 2008
Book Chapters
Ferreira, J.; Fonseca, C.; Covas, J. A.; Gaspar-Cunha, A.
– Evolutionary multi-objective robust optimization
, 2008
Book Chapters
Simões, Ricardo
– Modelling and rapid prototyping as an aid in collaborative product design and development
, 2008
Book Chapters
Cunha, Maria Manuela Cruz; Putnik, Goran D.; Simões, Ricardo
– Market of resources for health care teleservices management
, 2008
Book Chapters
Jorge, Hélio Rui Caldeira da Silva
– Compounding and processing of a water soluble binder for powder injection moulding
, 2008-11-25
PhD Theses
Leonor, I. B.
– New biomimetic acellular routes for pre-calcification of implant materials, carrier particles and porous scaffolds
, 2008-01-04
PhD Theses
Dencheva, Nadya Vasileva
– Development and investigation of novel in situ reinforced nanocomposites based on oriented polymer blends
, 2008-10-17
PhD Theses
Alves, Catarina Vieira Moniz
– The role of protein interactions with novel starch based polymeric implant materials on determining the correspondent host responses
, 2008-02-01
PhD Theses
Yanev, Angel Stoyanow
– Direct visualization and on-line monitoring in injection moulding
, 2008-12-29
PhD Theses
Silva, Simone Santos
– Processing and surface modification of novel natural-origin architectures aimed for biomedical applications
, 2008-10-06
PhD Theses
Silva, Manuel Ricardo Mendes Pereira da
– Preparation and characterisation of novel multifuncional chitosan-based membranes to modulate cell-material interactions
, 2008-02-02
PhD Theses
Malafaya, P. B.
– Osteochondral tissue engineering constructs combining particle aggregated scaffolding and bioactive delivery strategies
, 2008-05-12
PhD Theses
Fonseca, S. Cabral
– Durabilidade de materiais compósitos de matriz polimérica reforçados com fibras usados na reabilitação de estruturas de betão
, 2008-12-29
PhD Theses
Alves, P. S.; Pontes, A. J.
– The effect of thermomechanical environment on the shrinkage and warpage in thermoplastic parts
, 2008
Conference paper
Silva, M. P.; Sencadas, Vítor João Gomes Silva; Rolo, Anabela G.; Botelho, Gabriela; Machado, A. V.; Rocha, J. G.; Lanceros-Méndez, S.
– Influence of the crystallization kinetics on the microstructural properties of γ-PVDF
, 2008
Conference paper
Cunha, S. M.; Gaspar-Cunha, A.; Covas, J. A.
– Melting of PP/PA6 polymer blends in single screw extruders: an experimental study
, 2008
Conference paper
Paiva, M. C.; Gaied, Anissa El; Cheikh, R. B.; Cunha, A. M.
– Interfaces in alfa fibre-polypropylene matrix composites
, 2008-06
Conference paper
Guimarães, D. A.; Pontes, A. J.
– CAD/CAE techniques to prevent premature failure in direct AIM moulding inserts.
, 2008
Conference paper
Antunes, P. J.; Dias, Gustavo R.; Coelho, A. T.; Rebelo, F.; Pereira, T.
– Hyperelastic modelling of cork-polyurethane gel composites: non-linear FEA implementation in 3D foot model
, 2008
Conference paper
Dencheva, Nadya Vasileva; Oliveira, J.; Carneiro, O. S.; Nunes, Teresa G.; Denchev, Z.
– Preparation and Properties of Novel In-situ Composite Materials Based on Polyethylene-Polyamide Oriented Blends
, 2008
Conference paper
Domingues, N.; Gaspar-Cunha, A.; Covas, J. A.
– Assessing the mixing performance of extruders: indices and scale-up
, 2008
Conference paper
Campos, A. R.; Cunha, A. M.; Tielas, A.; Mateos, A.
– Biodegradable composites applied to the automotive industry: the development of a loudspeaker front
, 2008
Conference paper
Mateus, A.; Bártolo, Paulo Jorge; Mitchell, G.; Silva, M.; Pouzada, A. S.; Pontes, A. J.
– The effect of thermal conductivity of RIM moulds in kinetics cure
, 2008
Conference paper
Hancic, A.; Kuzman, K.; Kosel, F.; Andrej, G.; Cunha, A. M.; Gantar, G.
– Mechanical and processing characterization of effective behavior of wood-plastic composites by analytical and numerical simulation.
, 2008
Conference paper
Gaspar, J.; Bártolo, Paulo Jorge; Duarte, F. M.
– Cure and rheological analysis of reinforced resins for stereolithography
, 2008