van Duin, Martin; Antunes, Carla; Machado, A. V.; L'Abee, Roy; Goossens, Han
– Morphology development of (sub)micrometer thermoplastic vulcanisates
, 2007-12
Conference paper
Gomes, A. A.; Morim, P. C.; Oliveira, P. M.; Marques, C. M.; Minas, Graça; Pontes, A. J.
– A microfluidic system for integration on lab-on-a-chip devices
, 2007-09
Conference paper
Moura, I.; Machado, A. V.; Duarte, F. M.; Botelho, Gabriela; Nogueira, R.
– Preparation of biodegradable materials by reactive extruction
, 2007-04-01
Abstract
2006
Kumar, S. Ananda; Denchev, Z.; Alagar, M.
– Synthesis and thermal characterization of phosphorus- containing siliconized epoxy resins
, 2006
Article
Fernandes, C. S.; Dias, Ricardo P.; Nóbrega, J. M.; Afonso, I. M.; Melo, L. F.; Maia, J. M.
– Thermal behaviour of stirred yoghurt during cooling in plate heat exchangers
, 2006
Article
Oliveira, M. J.; Brito, A. M.; Costa, M. F.; Costa, M. C.
– Gloss and surface topography of ABS: a study on the Influence of the injection molding parameters
, 2006
Article
Duarte, F. M.; Botelho, Gabriela; Machado, A. V.
– Photo-degradability of ketone modified PS/HIPS blends
, 2006-02
Article
Silva, Cristina A.; Viana, J. C.; Hattum, F. W. J. van; Cunha, A. M.
– Fiber orientation in divergent/convergent fows in expansion and compression injection molding
, 2006
Article
Leer, C.; Hattum, F. W. J. van; Gaspar-Cunha, A.; Carneiro, O. S.; Bernardo, C. A.
– Tailored-shear extrusion carbon nanofibre/polyamide composites and its effect on the electrical percolation threshold
, 2006-09
Article
Filipe, Susana A.; Cidade, Maria Teresa; Wilhelm, M.; Leal, Catarina Rosa; Maia, J. M.
– Evolution of the morphological and rheological properties along the extruder length for compatibilized blends of a commercial liquid-crystalline polymer and polypropylene
, 2006
Article
Martins, Carla I.; Cakmak, M.
– Role of relaxation on strain crystallization of uniaxially stretched poly(ethylene naphthalate) films : a mechanooptical study
, 2006
Article
Alves, N. M.; Bártolo, Paulo Jorge
– Integrated computational tools for virtual and physical automatic construction
, 2006
Article
Simões, Ricardo; Cunha, A. M.; Brostow, Witold
– Computer simulations of true stress development and viscoelastic behavior in amorphous polymeric materials
, 2006
Article
Ben Abdallah, F.; Ben Cheikh, R.; Baklouti, M.; Denchev, Z.; Cunha, A. M.
– Characterization of composite materials based on PP-Cork blends
, 2006
Article
Viana, J. C.
– The local thermomechanical conditions and the fracture behaviour of an injection moulded poly(Oxymethylene)
, 2006
Article
Machado, A. V.; Neves, Isabel C.; Botelho, Gabriela; Rebelo, P.
– The effect of acidity behaviour of Y zeolites on the catalytic degradation of polyethylene
, 2006
Article
Machado, A. V.; Fernandes, Ana C.; Carvalho, P.; Vaz, F.; Lanceros-Méndez, S.; Parreira, N. M. G.; Pierson, J. F.; Martin, N.
– Property change in multifunctional TiCxOy thin films : effect of the O/Ti ratio
, 2006
Article
Bártolo, Paulo Jorge
– Photo-curing modelling : direct irradiation
, 2006
Article
Viana, J. C.
– Polymeric materials for impact and energy dissipation
, 2006
Article
Carneiro, O. S.; Viana, J. C.; Nóbrega, J. M.
– Study on processing-microstructure-properties relationships of extruded profiles
, 2006
Article
Simões, Ricardo João Ferreira; Cunha, A. M.; Brostow, Witold
– Molecular dynamics simulations of polymer viscoelasticity: effect of the loading conditions and creep behavior
, 2006
Article
Hattum, F. W. J. van; Leer, C.; Viana, J. C.; Carneiro, O. S.; Lake, M. L.; Bernardo, C. A.
– Conductive long fibre reinforced thermoplastics by using carbon nanofibres
, 2006
Article
Balakrishnan, T.; Alagar, M.; Denchev, Z.; Kumar, S. Ananda
– Development and characterization of silicone/phosphorus modified epoxy materials and their application as anticorrosion and antifouling coatings
, 2006
Article
Ribeiro, C. J.; Viana, J. C.; Vilaça, F.; Azenha, J.
– Design and simulation of automotive plastic pillars for occupant protection
, 2006-09
Article
Pick, L. T.; Harkin-Jones, Eileen; Oliveira, M. J.; Cramez, M. C.
– The effect of cooling rate on the impact and dynamic mechanical properties of rotationally moulded metallocene catalysed linear low density polyethylene
, 2006
Article
Pouzada, A. S.; Ferreira, Eduardo Campos; Pontes, A. J.
– Friction properties of moulding thermoplastics
, 2006
Article
Machado, A. V.; Yquel, Virginie; Covas, J. A.; Flat, Jean.-Jacques; Ghamri, Nessim; Wollny, Andreas
– The effect of the compatibilization route of PA/PO blends on the physico-chemical phenomena developing along a twin-screw extruder
, 2006
Article
Martins, Manuel Rodrigues; Covas, J. A.
– Helical flow during rotational pipe extrusion,
, 2006
Article
Berzini, F.; Vergnes, B.; Canevarolo, S. V.; Machado, A. V.; Covas, J. A.
– Evolution of the peroxide-induced degradation of polypropylene along a twin-screw extruder : experimental data and theoretical predictions
, 2006
Article
Denchev, Z.
– In-situ composite materials based on oriented polymer blends : preparation, structure and properties
, 2006
Book Chapters
Queirós, Luís Miguel Pinto de
– Projecto de moldes híbridos com auxílio de técnicas assistidas por computador
, 2006-01-19
MSc Theses
Silva, J. F.; Nunes, J. P.; Marques, A. T.
– Consolidation of glass fiber-polypropylene towpregs by compression moulding
, 2006
Conference paper
Van Duin, Martin; Machado, A. V.
– Dynamic vulcanisation of EPDM/HDPE-based thermoplastic vulcanisates studied along the extruder axis
, 2006-07
Conference paper
Simões, Ricardo; Viana, J. C.; Dias, Gustavo R.; Cunha, A. M.
– Influence of the interaction potential parameters on the mechanical response of simulated semi-crystalline polymeric materials
, 2006
Conference paper
Silva, J. M.; Machado, A. V.; Maia, J. M.
– Transient rheological behaviour of PA6/EPM/EPM-g-MA blends
, 2006
Conference paper
Machado, A. V.; Duin, M. van; Covas, J. A.
– Dynamic vulcanisation of EPDM-Based thermoplastic vulcanisates during extrusion: effect of processing conditions
, 2006
Conference paper
Leer, C.; Carneiro, O. S.; Covas, J. A.; Maia, J. M.; Hattum, F. W. J. van; Bernardo, C. A.; Biró, L. P.; Horváth, Z. E.; Kiricsi, I.
– Dispersion of carbon nanotubes in polycarbonate and its effect on the composite properties
, 2006
Conference paper
Pontes, A. J.; Pouzada, A. S.
– Predicting shrinkage in semi-crystalline injection mouldings - the influence of pressure
, 2006
Conference paper
Machado, A. V.; Neves, I. C.; Botelho, Gabriela; Rebelo, P.
– Thermogravimetric study of polyethylene catalytic degradation by zeolites
, 2006
Conference paper
Domingues, N.; Gaspar-Cunha, A.; Covas, J. A.
– Modelling of mixing in single screw extruders
, 2006
Conference paper
Duarte, F. M.; Covas, J. A.
– Multilayer plug assisted thermoforming - concept and practical usefulness
, 2006
Conference paper
Fangueiro, Raúl; Nunes, J. P.; Silva, J. F.; Araújo, Mário Duarte de; Novais, José Fernando Pinheiro
– Development of GF/PP towpreg woven fabrics for composite reinforcements
, 2006
Conference paper
Viana, J. C.; Mano, J. F.; Denchev, Z.; Oliveira, M. J.; Cramez, M. C.
– Nanostructure evolution during unixial deformation of PET : a simultaneous WAXS and SAXS study using synchrotron radiation
, 2006
Conference paper
Machado, A. V.; Silva, M. P.; Sencadas, Vítor João Gomes Silva; Rolo, Anabela G.; Lanceros-Méndez, S.; Botelho, Gabriela
– Influence of the crystallisation kinetics on the microstructural properties of α-PVDF
, 2006
Conference paper
Peças, Paulo; Henriques, Elsa; Quinas, Pedro; Gomes, Cristina; Pouzada, A. S.; Pontes, A. J.
– A contribution to the Life Cycle Management Application to mould making business
, 2006
Conference paper
Pontes, A. J.
– eSeSME : serviços electrónicos para PME’s do sector dos plásticos
, 2006
Other
2005
Machado, A. V.; Bassani, Adriane; Hage Junior, E.; Pessan, L. A.; Covas, J. A.
– Evolução da morfologia de fases de blendas PA6/AES em extrusora de dupla rosca e moldagem por injeção
, 2005