2011

Leer, C.; Carneiro, O. S.; Covas, J. A.; Maia, J. M.; Hattum, F. W. J. van; Bernardo, C. A.; Biró, L. P.; Horváth, Z. E.; Kiricsi, I. – Dispersion of carbon nanotubes in polycarbonate and its effect on the composite properties , 2011-07-01T15:23:51Z

Pontes, A. J.; Pouzada, A. S. – Predicting shrinkage in semi-crystalline injection mouldings - the influence of pressure , 2011-06-16T14:47:11Z

Mould, Sacha Trevelyan; Pereira, S. P.; Nóbrega, J. M.; Machado, A. V.; Covas, J. A. – On-line rheometry: a tool to monitor polymer nanocomposites production , 2011-12-02T12:07:54Z

Rajaraman, V.; Hau, B. S.; Rocha, L. A.; French, P. J.; Makinwa, K. A. A. – Design of a flexible contact-mode piezoresistive detector for time-based high sensitivity acceleration sensing , 2011-08-02T14:47:02Z

Dias, R. A.; Wolffenbuttel, R. F.; Cretu, E.; Rocha, Luís A. – Sensitivity linearization technique for a time based MEMS accelerometer , 2011-11-30T17:08:07Z

Nóbrega, J. M.; Ferreira, A.; Costa, Pedro; Carvalho, Helder; Sencadas, Vítor João Gomes Silva; Lanceros-Méndez, S. – Production of electroactive filaments by coextrusion , 2011-11-23T14:48:50Z

Gaspar-Cunha, A.; Loyens, Dirk; Hattum, F. W. J. van – Aesthetic design using multi-objective evolutionary algorithms , 2011-12-16T11:32:00Z

Oliveira, M.; Machado, A. V.; Nogueira, R. – Development of permeable reactive barrier for phosphorus removal , 2011-09-05T13:57:09Z

Antunes, P. J.; Dias, Gustavo R.; Coelho, A. T.; Rebelo, F.; Pereira, T. – Hyperelastic modelling of cork-polyurethane gel composites: non-linear FEA implementation in 3D foot model , 2011-11-02T11:53:27Z

Michelangelli, O. P.; Yamanoi, M.; Gaspar-Cunha, A.; Covas, J. A. – Flow dynamics and structure of solid pellets along the channel of a single screw extruder , 2011-12-16T11:56:26Z

Machado, A. V.; Neves, I. C.; Botelho, Gabriela; Rebelo, P. – Thermogravimetric study of polyethylene catalytic degradation by zeolites , 2011-06-28T10:35:30Z

Tecknik, J.; Brito, A. M.; Pouzada, A. S.; Martins, Carla I. – Influence of the injection rate and mould block material of hybrid moulds on the morphological development of PP parts , 2011-12-20T16:56:28Z

Velosa, J. C.; Nunes, J. P.; Silva, J. F.; Bernardo, C. A.; Marques, A. T. – Production of thermoplastic towpregs , 2011-07-29T14:34:47Z

Domingues, N.; Gaspar-Cunha, A.; Covas, J. A. – Modelling of mixing in single screw extruders , 2011-06-20T10:46:55Z

Santos, Isa C. T.; Tavares, João Manuel R. S.; Rocha, Luís A. – Concept selection in the development of medical devices: the case of the smart stent-graft , 2011-11-29T17:39:16Z

Rajaraman, V.; Hau, B. S.; Rocha, Luís A.; Dias, R. A.; Makinwa, K. A. A.; Dekker, R. – A novel SOI-MEMS ‘Micro- Swing’ time-accelerometer operating in two time-based transduction modes for high sensitivity and extended range , 2011-12-02T10:29:25Z

Neves, A. F.; Salmoria, Gean; Ahrens, Carlos; Pouzada, A. S.; Silva, M. A. – Assessment of injection moulded parts of PP/nanoclay produced with hybrid moulds , 2011-12-21T17:14:42Z

Duarte, F. M.; Covas, J. A. – Multilayer plug assisted thermoforming - concept and practical usefulness , 2011-07-07T10:41:52Z

Mateus, A.; Bártolo, Paulo Jorge; Mitchell, G.; Silva, M.; Pouzada, A. S.; Pontes, A. J. – The effect of thermal conductivity of RIM moulds in kinetics cure , 2011-08-01T15:00:06Z

Dias, R. A.; Wolffenbuttel, R. F.; Cretu, E.; Rocha, Luís A. – Noise analysis of a micro-G pull-in time accelerometer , 2011-12-02T10:13:13Z

Oliveira, Cristina; Silva, José Machado da; Rocha, Luís A. – Test of a stent-graft endoleakage monitor , 2011-11-30T15:53:03Z

Costa, S. F.; Duarte, F. M.; Covas, J. A. – Modelling of the thermal behaviour of free form extrusion , 2011-08-05T14:09:24Z

Fangueiro, Raúl; Nunes, J. P.; Silva, J. F.; Araújo, Mário Duarte de; Novais, José Fernando Pinheiro – Development of GF/PP towpreg woven fabrics for composite reinforcements , 2011-06-21T14:42:31Z

Almeida, Maria de Fátima; Machado, A. V.; Covas, J. A. – The morphology during extrusion of PA6/PP blends in the presence of nanoclays , 2011-09-05T10:06:59Z

Martins, Carla I.; Lima, F. A.; Duarte, F. M. – Study of welding strengh in PVC profiles , 2011-12-20T17:33:40Z

Martins, R. S.; Silva, Marco Aurélio Pinto; Carneiro, O. S.; Rocha, J. G.; Nóbrega, J. M.; Carvalho, Helder; Lanceros-Méndez, S. – Electroactive tape extrusion : influence of processing conditions on the β-phase content of PVDF samples , 2011-11-17T10:04:07Z

Covas, J. A.; Almeida, M. F.; Machado, A. V.; Larocca, N. M.; Pessan, L. A. – Nanoclays dispersion in a PA6/PP blend by twin screw compounding , 2011-11-30T12:27:55Z

Neves, N. M.; Pontes, A. J.; Velosa, J. C.; Faria, A. R.; Pouzada, A. S. – Glass fibre content of PP plates and their properties: part II: tensile mechanical properties , 2011-10-25T13:52:12Z

Nunes, J. P.; Silva, J. F. – Production of thermoplastic matrix towpregs for higly demanding and cost - effective commercial applications , 2011-12-02T18:59:40Z

Nunes, J. P.; Silva, J. F. – Processing thermoplastic matrix towpregs by pultrusion , 2011-12-21T22:32:04Z

Sepúlveda, A. T.; Pontes, A. J.; Viana, J. C.; Guzmán de Villoria, R.; Fachin, F.; Wardle, B. L.; Rocha, Luís A. – Flexible sensor for blood pressure measurement , 2011-11-30T16:37:40Z

Dias, R. A.; Cretu, E.; Wolffenbuttel, R. F.; Rocha, Luís A. – Squeeze-film damper design with air channels : experimental verification , 2011-11-30T14:36:18Z

Leite, Janaina L.; Salmoria, Gean; Ahrens, Carlos; Pouzada, A. S. – Characterization of epoxy/steel fibres composites for hybrid injection moulds , 2011-10-31T20:56:04Z

Santos, R. M.; Botelho, Gabriela; Machado, A. V. – Role of ultraviolet absorbers (UVA) and hindered amine light stabilizers (HALS) in ABS stabilization , 2011-08-03T10:33:20Z

Viana, J. C.; Mano, J. F.; Denchev, Z.; Oliveira, M. J.; Cramez, M. C. – Nanostructure evolution during unixial deformation of PET : a simultaneous WAXS and SAXS study using synchrotron radiation , 2011-06-14T10:47:45Z

Nogueira, A. A.; Martinho, P. G.; Brito, A. M.; Pouzada, A. S. – A study on the mouldability of technical parts using hybrid moulds and structural foams , 2011-10-28T14:49:59Z

Sousa, A. M. M.; Sereno, A. M.; Hilliou, L.; Gonçalves, M. P. – Biodegradable agar extracted from gracilaria vermiculophylla: films properties and application to edible coating , 2011-08-01T14:40:28Z

Carneiro, O. S.; Covas, J. A.; Domingues, C. – Correlations between processing conditions, structure and properties of bi-oriented blown films , 2011-12-09T17:29:33Z

Silva, M. A.; Martinho, P. G.; Pouzada, A. S. – Warpage of injection mouldings in hybrid moulds with epoxy-aluminium composite core , 2011-10-28T13:25:15Z

Vieira, D. G.; Meireles, José F.; Nunes, J. P.; Silva, Lucas F. – Substituting conventional steel alloys by carbon fibre composites in structural parts of an existing laser cutting equipment , 2011-12-07T18:21:14Z

Hede, Shantesh; Nunes, Manuel L.; Ferreira, Paula Varandas; Rocha, Luís A. – Addressing sustainability: comprehensive frameworks for evaluating new product development , 2011-11-30T15:36:32Z

Ferreira, Tânia; Paiva, M. C.; Pontes, A. J. – Functionalized carbon nanotubes-polyamide composites produced by microinjection moulding , 2011-12-16T11:49:09Z

Costantino, Alejandra; Pettarin, Valeria; Viana, J. C.; Pontes, A. J.; Pouzada, A. S.; Frontini, P. M. – Microestructura y desempeño de compuestos de PP/nanoarcilla producidos por técnicas de inyección no convencionales , 2011-12-21T17:25:11Z

Machado, A. V.; Lima, A. Delgado – Bionanocomposites based on poly(e-caprolactone) and titanium , 2011-11-29T09:21:13Z

Ferrás, Luís Jorge Lima; Nóbrega, J. M.; Pinho, F. T. – Implementation of the wall slip boundary condition in a computational rheology code based on the finite volume method , 2011-12-20T16:18:03Z

Ferrás, Luís Jorge Lima; Carneiro, O. S.; Pinho, F. T.; Nóbrega, J. M. – Wall slip effects in planar contraction channel flow of newtonian and sPTT fluids , 2011-12-19T11:14:41Z

Pereira, S. P.; Nóbrega, J. M.; Carneiro, O. S. – The performance of extrusion dies : the effect of machinning innacuracies, flow rate and melt rheology , 2011-12-19T10:48:38Z

Ferreira, José; Gaspar-Cunha, A.; Fonseca, Carlos M. – Experimental evaluation of some preference parametrization schemes , 2011-12-09T17:47:07Z

Lima, A. Delgado; Machado, A. V. – Bionanocomposites prepared by a sol-gel process in the melt , 2011-05-18T16:46:15Z

Oliveira, M.; Nogueira, R.; Machado, A. V. – Hybrid polymer containing in-situ generated aluminum nanoparticles , 2011-12-02T10:39:59Z