Gaspar, Hugo Silva; Santos, Ana Raquel Ribeiro; Teixeira, Paulo Francisco; Hilliou, L.; Weir, Michael P.; Duif, Chris P.; Bouwman, Wim G.; Parnell, Steven R.; King, Stephen M.; Covas, J. A.; Bernardo, Gabriel
– Evolution of dispersion in the melt compounding of a model polymer nanocomposite system: a multi-scale study
, 2019-07
Article
Gomes, José Miguel Sousa; Cruz, Sílvia Manuela Ferreira; Lopes, Henrique; Arcipreste, Bruno; Magalhães, Roberto; Ferreira da Silva, Alexandre; Viana, J. C.
– Distributed optical fiber sensors for PCB-strain analysis
, 2019-10
Article
Costa, Ricardo Daniel Pereira da; Nóbrega, J. M.; Clain, Stéphane; Machado, Gaspar J.
– Very high-order accurate polygonal mesh finite volume scheme for conjugate heat transfer problems with curved interfaces and imperfect contacts
, 2019-12
Article
Silva, Mariana M.; Ribeiro, Daniel Freitas; Cunha, Eunice; Proença, M. Fernanda R. P.; Young, Robert J.; Paiva, M. C.
– A simple method for anchoring silver and copper nanoparticles on single wall carbon nanotubes
, 2019-10-04
Article
Costa, Sónia; Teixeira, Paulo F.; Covas, J. A.; Hilliou, L.
– Assessment of piezoelectric sensors for the acquisition of steady melt pressures in polymer extrusion
, 2019-04-03
Article
Denysiuk, Roman; Duarte, F. M.; Nunes, J. P.; Gaspar-Cunha, A.
– Evolving neural networks to optimize material usage in blow molded containers
, 2019
Book Chapters
Novo, J. P.; Esfandiari, P.; Silva, J. F.; Nunes, J. P.; Marques, A. T.
– Pultrusion and compression moulding of thermoplastic pre-impregnated materials reinforced by continuous glass fibres
, 2019-06-27
Book Chapters
Covas, J. A.; Paiva, M. C.
– Monitoring dispersion and re-agglomeration phenomena during the manufacture of polymer nanocomposites
, 2019
Book Chapters
Ferdynus, Miroslaw; Sikora, Janusz; Gaspar-Cunha, A.
– Mecanismo de plasticização da extrusora monofuso
, 2019
Patents
Leite, Álvaro Joel Moreira
– Advanced nanocomposites based on bioactive glass nanoparticles for biomedical applications
, 2019-11-27
PhD Theses
Marques, Mariana Machado
– Estudo do efeito do compatibilizador nas propriedades de compósitos de resíduos de café com polipropileno
, 2019
MSc Theses
Fontaínhas, Ana Margarida Cunhal
– Injection moulding simulation using OpenFOAM®
, 2019
MSc Theses
Couto, Vitória Gil Padrão
– Estratégias de melhoria de propriedades de compósitos de polietileno e cortiça por moldação rotacional
, 2019
MSc Theses
Cunha, Paulo Manuel de Freitas
– Impressão 3D de estruturas híbridas
, 2019
MSc Theses
Rodrigues, Nélson Ferreira
– Estudo de materiais estanques à humidade em condensadores de filme, para encapsulamento da bobina
, 2019
MSc Theses
Rodrigues, Luís Carlos Fernandes Oliveira
– Estudo do processamento de peças em PE com cortiça por moldação rotacional
, 2019
MSc Theses
Pinto, Renê Souza; Silva, Hugo M.; Duarte, Fernando M.; Nunes, João; Gaspar-Cunha, A.
– Neuroevolutionary multiobjective methodology for the optimization of the injection blow molding process
, 2019-03
Conference paper
Simões, Carla L.; Ribeiro, Carolina; Bernardo, Pedro; Pontes, A. J.; Bernardo, C. A.
– Assessing the environmental and economic performance of alternative car chassis
, 2019-08-26
Conference paper
Amorim, Luís Manuel Machado; Santos, Ana Raquel Ribeiro; Nunes, J. P.; Viana, J. C.
– Thin veils strategically interleaved to reduce low velocity damages on CFRP
, 2019-05
Conference paper
Moreira, João Pedro Oliveira; Ferreira, Luís; Figueiredo, Bruno; Cruz, Paulo J. S.; Sampaio, Álvaro M.; Gonçalves, Rita; Pontes, A. J.
– Self-supporting ceramic wall system: Challenges of additive manufacturing of architectural ceramic components
, 2019
Conference paper
Lopes, Paulo Estevão Caldeira; Moura, Duarte Alexandre Campos Serra; Freitas, D.; Proença, M. Fernanda R. P.; Figueiredo, H.; Alves, R.; Paiva, M. C.
– Advanced electrically conductive adhesives for high complexity PCB assembly
, 2019
Conference paper
Rajkumar, Ananth; Ferras, Luis L.; Fernandes, C.; Carneiro, O. S.; Sacramento, Alberto; Nóbrega, J. M.
– Differential heating as a strategy for controlling the flow distribution in profile extrusion dies
, 2019
Conference paper
Bruijn, T. A. de; Vincent, G. A.; Meuzelaar, J.; Nunes, J. P.; van Hattum, F. W. J.
– Design, manufacturing and testing of a rotorcraft access panel door from recycled carbon fiber reinforced polyphenylenesulfide
, 2019
Conference paper
Fernandes, C.; Araujo, Manoel S. B.; Ferrás, Luís Jorge Lima; Nóbrega, J. M.
– Improving the numerical stability of steady-state differential viscoelastic flow solvers in OpenFOAM (R)
, 2019
Conference paper
Amorim, Luís Manuel Machado; Santos, Ana Raquel Ribeiro; Nunes, J. P.; Viana, J. C.
– Bioinspired architectures toward improving damage resistance on CFRP laminates
, 2019-08
Conference paper
Denysiuk, Roman; Gaspar-Cunha, A.; Delbem, Alexandre C. B.
– Combining artificial neural networks and evolution to solve multiobjective knapsack problems
, 2019
Conference paper
Amorim, Luís Manuel Machado; Santos, Ana Raquel Ribeiro; Infante, V.; Nunes, J. P.; Viana, J. C.
– Impact damage mitigation using bioinspired CFRP laminate architectures
, 2019
Conference paper
Covas, J. A.; Teixeira, Paulo Francisco; Hilliou, L.
– In-process rheological measurements during the manufacture of multiphase polymer systems
, 2019
Conference paper
Rocha, Helena Cristina Lopes; Kumar, Manish; Nunes, J. P.
– Influence of optical fiber sensor placement on CFRP laminates for process and structural health monitoring
, 2019-08
Abstract
Gonçalves, Clara Catarina Pereira; Magalhães, Rui Miguel Pires; Fangueiro, Raúl; Nunes, J. P.; Dias, Gustavo R.
– Novel auxetic thermoset and thermoplastic composites for energy absorption
, 2019-08
Abstract
Santos, Ana Raquel Ribeiro; Amorim, Luís Manuel Machado; Nunes, J. P.; Rocha, Luís Alexandre Machado; Ferreira da Silva, Alexandre; Viana, J. C.
– Strain sensors based on knocked down carbon nanotubes and bucky papers thin films
, 2019-07
Abstract
Martins, M. M.; Carneiro, O. S.; Fernandes, C.; Nóbrega, J. M.
– Using computational modelling to improve the insight regarding multi-layer polymer flows in co-extrusion
, 2019-06
Poster
Fontaínhas, Ana Margarida Cunhal; Pedro, João Luís Oliveira; Nóbrega, J. M.; Fernandes, C.
– Numerical simulation of the injection moulding filling stage using open-source and proprietary software
, 2019
Poster
Fontaínhas, Ana Margarida Cunhal; Pedro, João Luís Oliveira; Romero, João Luís Braga Simões; Costa, Ricardo Daniel Pereira da; Nóbrega, J. M.; Fernandes, C.
– Development and verification of an open-source computational framework to simulate injection moulding
, 2019-07
Poster
Fernandes, C.; Faroughi, S. A.; Carneiro, O. S.; Nóbrega, J. M.; McKinley, G. H.
– A fully-resolved immersed boundary numerical method to simulate particle-laden viscoelastic flows
, 2019-06
Oral presentation
Faroughi, S. A.; Fernandes, C.; McKinley, G. H.; Nóbrega, J. M.
– Effects of elasticity, inertia and viscosity ratio on the drag coefficient of a sphere translating through a viscoelastic fluid
, 2019-06
Oral presentation
Fernandes, C.; Faroughi, S. A.; Carneiro, O. S.; Nóbrega, J. M.; McKinley, G. H.
– A fully-resolved immersed boundary numerical method to simulate particle-laden viscoelastic flows
, 2019-07
Oral presentation
Fernandes, C.; Rajkumar, Ananth; Habla, F.; Mould, Sacha Trevelyan; Sacramento, A.; Carneiro, O. S.; Nóbrega, J. M.
– Experimental assessment of a numerical modelling code developed for the profile extrusion cooling stage
, 2019-06
Oral presentation
Fernandes, C.; Faroughi, S.A.; Carneiro, O. S.; Nóbrega, J. M.; McKinley, G.H.
– A fully-resolved immersed boundary numerical method to simulate particle-laden viscoelastic flows
, 2019-05
Oral presentation
Fernandes, C.; Faroughi, S. A.; Carneiro, O. S.; Nóbrega, J. M.; McKinley, G. H.
– Development of a two-way coupled fully resolved immersed boundary method numerical code for particle laden viscoelastic flows
, 2019-07
Oral presentation
Fernandes, C.
– Implementation of a fully resolved immersed boundary solver for particle-laden viscoelastic flows
, 2019-03
Oral presentation
Cidade, Maria Teresa; Nóbrega, J. M.
– Editorial for Special Issue “Advances in Experimental and Computational Rheology”
, 2019-07-12
Journal editorial
2018
Fernandes, Célio Bruno Pinto; Semyonov, D.; Ferrás, Luís Jorge Lima; Nóbrega, J. M.
– Validation of the CFD-DPM solver DPMFoam in OpenFOAM (R) through analytical, numerical and experimental comparisons
, 2018
Article
Gaspar, Hugo; Figueira, Flávio; Pereira, Luiz; Mendes, Adélio; Viana, J. C.; Bernardo, Gabriel
– Recent developments in the optimization of the bulk heterojunction morphology of polymer: Fullerene solar cells
, 2018-12-16
Article
Araujo, M. S. B.; Fernandes, Célio Bruno Pinto; Ferrás, Luís Jorge Lima; Tukovic, Z.; Jasak, H.; Nóbrega, J. M.
– A stable numerical implementation of integral viscoelastic models in the OpenFOAM (R) computational library
, 2018
Article
Carson, Sidney O.; Maia, João Manuel Luís Lopes; Covas, J. A.
– A new extensional mixing element for improved dispersive mixing in twin-screw extrusion, part 2: experimental validation for immiscible polymer blends
, 2018
Article
Costa, C. M.; Kundu, M.; Cardoso, Vanessa Fernandes; Machado, A. V.; Silva, Maria Manuela; Lanceros-Méndez, S.
– Silica/poly(vinylidene fluoride) porous composite membranes for lithium-ion battery separators
, 2018
Article
Kuzmanović, Maja; Delva, Laurens; Mi, Dashan; Martins, Carla I.; Cardon, Ludwig; Ragaert, Kim
– Development of crystalline morphology and its relationship with mechanical properties of PP/PET microfibrillar composites containing POE and POE-g-MA
, 2018-03-08
Article
Garcia, M. C. R.; Netto, A. C. S.; Pontes, A. J.
– Experimental study of shrinkage and ejection forces of reinforced polypropylene based on nanoclays and short glass fibers
, 2018
Article
Bjorge, Isabel M.; Costa, Ana M. S.; Sofia Silva, A.; Vidal, Joao P. O.; Nóbrega, J. M.; Mano, J. F.
– Tuneable spheroidal hydrogel particles for cell and drug encapsulation
, 2018