2012

Novais, R. M.; Covas, J. A.; Paiva, M. C. – The effect of flow type and chemical functionalization on the dispersion of carbon nanofiber agglomerates in polypropylene , 2012-02-02

Oliveira, M.; Nogueira, R.; Machado, A. V. – Synthesis of aluminium nanoparticles in a PP matrix during melt processing: effect of the alkoxide organic chain , 2012

Leite, Janaina L.; Salmoria, Gean; Paggi, R. A.; Ahrens, Carlos; Pouzada, A. S. – Microstructural characterization and mechanical properties of functionally graded PA12/HDPE parts by selective laser sintering , 2012

Carvalho, Irene; Baier, Thomas; Simões, Ricardo; Silva, Arlindo – Reducing fuel consumption through modular vehicle architectures , 2012

Ferrás, Luís Jorge Lima; Afonso, A. M.; Alves, M. A.; Nóbrega, J. M.; Pinho, F. T. – Development length in planar channel flows of newtonian fluids under the influence of wall slip , 2012-09-24

Ferreira, A.; Cardoso, Paulo; Klosterman, D.; Covas, J. A.; Hattum, F. W. J. van; Vaz, F.; Lanceros-Méndez, S. – Effect of filler dispersion on the electromechanical response of epoxy/vapour grown carbon nanofiber composites , 2012

Mould, S. T.; Barbas, J. M.; Machado, A. V.; Nóbrega, J. M.; Covas, J. A. – Monitoring the production of polymer nanocomposites by melt compounding with on-line rheometry , 2012

Dobrzański, L. A.; Bilewicz, M.; Viana, J. C. – Polymer nanocomposites reinforced with montmorillonite , 2012-01

Silva, Jaime; Simões, Ricardo; Lanceros-Méndez, S. – Modeling carbon nanotube electrical properties in CNT/polymer composites , 2012

Carneiro, O. S.; Nóbrega, J. M. – Main issues in the design of extrusion forming tools , 2012

Gaspar-Cunha, A.; Mendes, F.; Duarte, J.; Vieira, Armando; Ribeiro, Bernardete; Ribeiro, André M. S.; Neves, João Carvalho – Feature selection for bankruptcy prediction: a multi-objective optimization approach , 2012

Denchev, Z.; Dencheva, Nadya Vasileva – Manufacturing and properties of aramid-reinforced composites , 2012-08

Santos, Isa C. T.; Sepúlveda, A. T.; Viana, J. C.; Pontes, A. J.; Wardle, B. L.; Sampaio, S. M.; Roncon-Albuquerque, R.; Tavares, João Manuel R. S.; Rocha, L. A. – Improving post-EVAR surveillance with a smart stent-graft , 2012

Moura, I.; Machado, A. V. – Modification of biodegradable polymers through rreactive extrusion-I , 2012

Nóbrega, J. M.; Carneiro, O. S. – Profile forming tools , 2012

Denchev, Z.; Dencheva, Nadya Vasileva – Preparation, mechanical properties and structural characterization of microfibrillar composites based on polyethylene/polyamide blends , 2012-09

Rocha, L. A.; Silva, Cátia;; Pontes, A. J.; Viana, J. C. – 3 axis polymeric accelerometer and method of production , 2012

Gomes, C. A. M.; Pedrosa, R. F. P.; Mateus, A. J. S.,; Bártolo, Paulo Jorge; Martins, C. I.; Pontes, A. J. – Processo de sobremoldação de vedante numa tampa plástica , 2012-12-12

Sampaio, Álvaro M. – Integrating product design and engineering for multifunctional products with embedded microelectronics , 2012-12-20

Silva, Nuno André Martins – 3D functionalized multi-supportive structures (FMSS): a novel route for spinal cord injury regeneration , 2012-11-26

Carvalho, Pedro Miguel Pires de – Standardization of isolation and culture protocols for the translation of human adipose-derived stem cells (hASCs) to clinical practice , 2012-12-06

Novais, R. M. – Functionalized carbon nanotubes for polymer based nanocomposites , 2012-07-23

Pinto, Anabela Alves – Exploring the biomedical potential of a novel algae origin polysaccharide , 2012-03-09

Luz, Gisela – Bioactive glass nanoparticles combined with natural-based polymers for biomedical applications , 2012-12-07

Correia, Cristina – Engineering osteochondral tissues with human adipose tissue derived stem cells under precise biomechanical and biochemical in vitro environments , 2012-03-02

Oliveira, Manuel António Sousa Cortez Gonçalves – New eco-efficient polymers for phosphorus recovery , 2012-06-19

Santo, Vítor Sérgio Soares Espírito – Natural origin polymer-based nanocarriers as tools for controlled release of bioactive factors aimed to manipulate stem cells performance in bone and cartilage tissue regeneration strategies , 2012-03-15

Fernandes, Célio Bruno Pinto – Optimization of the injection moulding process: from polymer plasticating to final part properties , 2012-12-12

Ferrás, Luís Jorge Lima – Theoretical and numerical studies of slip flows , 2012-11-23

Mendes, Ana Carina – Innovative self-assembled and microfabricated structures to be used in distinct biomedical applications , 2012-10-17

Ferreira, Cândida Sofia Teixeira – Preparation and characterization of biodegradable blends of Poly(L-lactic) acid and Chitosan , 2012

Sousa, Maria José Peixoto de – Development of paper-based devices, using a simple phase separation process for the fabrication of biomimetic superhydrophobic paper substrates , 2012

Monteiro, Diogo Amadeu Arantes – Sistema de reciclagem de garrafas de plástico para o Centro de Ciência Viva de Guimarães (CCVG) , 2012

Freitas, Maria Isabel Macedo de – Sustentabilidade de compósitos de polipropileno e nanofibras de carbono: avaliação do efeito de reprocessamento , 2012

Costantino, Alejandra; Pettarin, Valeria; Viana, J. C.; Pontes, A. J.; Pouzada, A. S.; Frontini, P. M. – Microstructure of PP/clay nanocomposites produced by shear induced injection moulding , 2012-08

Esteves, F. R.; Carvalho, T. A.; Martins, Carla I.; Pouzada, A. S. – The influence of processing conditions on the aesthetical, morphological and mechanical properties of SF mouldings of high-impact polystyrene (HIPS-SF) , 2012

Alves, F. S.; Dias, Rosana A.; Cabral, Jorge; Rocha, Luís A. – Autonomous MEMS Inclinometer , 2012-06

Nóbrega, J. M.; Carneiro, O. S. – Computer aided design of extruded profile forming tools , 2012-06

Silva, J. F.; Nunes, J. P.; Marques, A. T. – Filament wound products made with thermoplastic matrix towpregs , 2012-06-24

Pouzada, A. S.; Brito, A. M.; Oliveira, F. M.; Dencheva, Nadya Vasileva; Denchev, Z.; Lanceros-Méndez, S. – Semi-automatic laboratory equipment for reactive injection molding , 2012-09

Zhiltsova, T. V.; Oliveira, M. S. A.; Ferreira, J. A.; Vasco, Joel Oliveira Correia; Pouzada, A. S.; Pontes, A. J. – Effect of the micromoulding process conditions on polymer flow behavior within a variable thickness microcavity , 2012

Costa, Ângelo; Andrade, Francisco Carneiro Pacheco; Novais, Paulo; Simões, Ricardo – Privacy and data protection in elderly healthcare: threats and legal warranties , 2012

Moosavi, M. R.; Gaspar-Cunha, A.; Carneiro, O. S.; Nóbrega, J. M. – Incorporating tool deformation in the design of extrusion dies for complex hollow profiles , 2012-06

Santos, Isa C. T.; Gazelle, G. Scott; Rocha, Luís A.; Tavares, João Manuel R. S. – Development of medical devices : advantages of a methodic approach , 2012

Vardasca, Ricardo; Ferreira, Liliana; Simões, Ricardo – Needs and opportunities in ambient assisted living in Portugal , 2012-02

Dias, Rosana A.; Wolffenbuttel, R. F.; Cretu, E.; Rocha, Luís A. – Closed loop operation of time-based accelerometers , 2012-09

Novo, Paulo; Silva, J. F.; Nunes, J. P.; Hattum, F. W. J. van; Marques, A. T. – Development of a new pultrusion equipment to manufacture thermoplastic matrix composite profiles , 2012-06-24

Santos, Isa C. T.; Gazelle, G. Scott; Rocha, Luís A.; Tavares, João Manuel R. S. – An ontology model for the medical device development process in Europe , 2012-05

Treml Junior, C. A.; Leite, Janaina L.; Sousa, Adriano Fagali; Pouzada, A. S. – Morphological characterization of injection molded parts in Ren Shape 5166 polyurethane inserts for rapid tooling , 2012

Gonçalves, N. D.; Carneiro, O. S.; Nóbrega, J. M. – Flow balancing in extrusion dies for complex geometry profiles , 2012-05