Silva, J. M.; Machado, A. V.; Moldenaers, P.; Maia, J. M.
– Deformation and relaxation of PMMA/PS and PMMA/PSOX blends
, 2008-01
Conference paper
Faria, R. P.; Carneiro, O. S.; Nóbrega, J. M.; Ritto, M. K.
– Design and optimisation of a blow moulded container
, 2008
Conference paper
Domingues, N.; Gaspar-Cunha, A.; Covas, J. A.
– The use of global mixing indices to assess mixing efficiency in single screw extrusion
, 2008
Abstract
Domingues, N.; Gaspar-Cunha, A.; Covas, J. A.; Camesasca, M.; Kaufman, M.; Manas-Zloczower, I.
– Numerical and experimental study of agglomerate dispersion in polymer extrusion
, 2008
Abstract
Domingues, N.; Gaspar-Cunha, A.; Covas, J. A.
– Global mixing indices for single screw extrusion
, 2008
Abstract
Domingues, N.; Gaspar-Cunha, A.; Covas, J. A.
– Re-visiting extrusion scale-up
, 2008
Abstract
Fernandes, Célio Bruno Pinto; Viana, J. C.; Pontes, A. J.; Gaspar-Cunha, A.
– Setting of the operative processing window in injection moulding using a multi-optimization approach: experimental assessment
, 2008
Abstract
Gomes, M. J. M.; Viana, J. C.; Pontes, A. J.
– Moldação por injecção de polímeros incompatíveis
, 2008-09
Other
2007
Neves, I. C.; Botelho, Gabriela; Machado, A. V.; Rebelo, P.; Ramôa, S.; Pereira, M. F. R.; Ramanathan, A.; Pescarmona, P.
– Feedstock recycling of polyethylene over AlTUD mesoporous materials
, 2007
Article
Campos, Ana M. F. Oliveira; Oliveira, M. J.; Rodrigues, Lígia M.; Silva, Maria Manuela; Smith, Michael John
– Thermal analysis of a polymorphic azo dye derived from 2-amino-5-nitrothiazole
, 2007-01
Article
Fernandes, F. M. Braz; Araújo, R. F.; Proença, M. Fernanda R. P.; Silva, Carlos J. R.; Paiva, M. C.
– Functionalization of carbon nanofibers by a diels-alder addition reaction
, 2007
Article
Araújo, R. F.; Fernandes, F. M. Braz; Proença, M. Fernanda R. P.; Silva, Carlos J. R.; Paiva, M. C.
– The 1,3-dipolar cycloaddition reaction in the functionalization of carbon nanofibers
, 2007-10
Article
Ghosh, Satyabrata; Viana, J. C.; Reis, R. L.; Mano, J. F.
– The double porogen approach as a new technique for the fabrication of interconnected poly(L-lactic acid) and starch based biodegradable scaffolds
, 2007
Article
Silva, Cristina A.; Viana, J. C.; Cunha, A. M.
– Novel morphologies produced by active shear rotation during injection molding
, 2007-03
Article
Fernandes, C. S.; Dias, R.; Nóbrega, J. M.; Maia, J. M.
– Laminar flows in chevron-type plate heat exchangers: CFD analysis of tortuosity, shape factor and friction factor
, 2007
Article
Paiva, M. C.; Ammar, I.; Campos, A. R.; Cheikh, R. B.; Cunha, A. M.
– Alfa fibres : mechanical, morphological and interfacial characterization
, 2007
Article
Neves, I. C.; Botelho, Gabriela; Machado, A. V.; Rebelo, P.
– Catalytic degradation of polyethylene : an evaluation of the effect of dealuminated Y Zeolites using thermal analysis
, 2007
Article
Gonçalves, Mathias; Salmoria, Gean; Ahrens, Carlos; Pouzada, A. S.
– Study of tribological properties of moulds obtained by stereolithography
, 2007
Article
Dencheva, Nadya Vasileva; Denchev, Z.; Oliveira, M. J.; Funari, S. S.
– Relationship between crystalline structure and mechanical behavior in isotropic and oriented polyamide 6
, 2007
Article
Silva, Cristina A.; Viana, J. C.; Hattum, F. W. J. van; Cunha, A. M.
– Mechanical properties of glass fibre reinforced polypropylene disks produced by rotating, expansion and compression injection moulding
, 2007-07
Article
Apostolov, Anton Atanassov; Evstatiev, M.; Denchev, Z.; Friedrich, K.; Fakirov, Stoyko
– Effect of composition on transcrystallization with reorientation of polypropylene in drawn PET/PP blend
, 2007-02
Article
Machado, A. V.; Duarte, F. M.; Botelho, Gabriela; Moura, I.
– Photochemical aging and processability of life-time-controlled polystyrene/high-impact polystyrene blends
, 2007
Article
Carneiro, O. S.; Oliveira, M. J.; Martins, R. L.
– Effect of pinch-off welding on quality of food packaging bottle
, 2007
Article
Morelli, Carolina L.; Sousa, José Alexandrino; Pouzada, A. S.
– Assessment of weld line performance of PP/Talc moldings produced in hot runner injection molds
, 2007
Article
Martins, Carla I.; Cakmak, M.
– Control the strain-induced crystallization of polyethylene terephthalate by temporally varying deformation rates : a mechano-optical study
, 2007
Article
Canto, L. B.; Mantovani, G. L.; Covas, J. A.; Hage Junior, E.; Pessan, L. A.
– Phase morphology development during processing of compatibilized and uncompatibilized PBT/ABS blends
, 2007
Article
Silva, M.; Mateus, A.; Bártolo, Paulo Jorge; Pouzada, A. S.; Pontes, A. J.
– Influence of mould material in products moulded by RIM
, 2007
Article
Lyudmil, T.; Viana, J. C.
– Characterization of PET nanocomposites produced by different melt-based production methods
, 2007
Article
Araújo, R. F.; Paiva, M. C.; Proença, M. Fernanda R. P.; Silva, Carlos J. R.
– Functionalization of carbon nanofibers by 1,3 - dipolar cycloaddition reactions and its effect on composite properties
, 2007
Article
Silva, Jorge M.; Machado, A. V.; Maia, J. M.
– Rheological behavior of compatibilized and non-compatibilized PA6/EPM blends
, 2007-10
Article
Selada, Antonio; Pouzada, A. S.
– µEDM: as várias opções para micromanufactura
, 2007
Article
Ghosh, Satyabrata; Viana, J. C.; Reis, R. L.; Mano, J. F.
– Effect of processing conditions on morphology and mechanical properties of injection-molded poly(L-lactic acid)
, 2007
Article
Guimarães, D. A.; Alves, A.; Pontes, A. J.
– The use of stereolithography in direct tooling
, 2007
Article
Hancic, A.; Kosel, F.; Campos, A. R.; Cunha, A. M.; Gantar, G.
– A model for predicting the mechanical properties of wood-plastic composites : a micro-mechanical approach
, 2007
Article
Viana, J. C.; Cunha, A. M.; Billon, N.
– Experimental characterization and computational simulations of the impact behavior of injection-molded polymers
, 2007
Article
Filipe, Susana A.; Maia, J. M.; Leal, Catarina Rosa; Cidade, Maria Teresa
– Influence of processing conditions on the morphological development and final mechanical properties of PP/LCP blends
, 2007
Article
Machado, A. V.; Moura, I.; Duarte, F. M.; Botelho, Gabriela; Nogueira, R.; Brito, A. G.
– Evaluation of properties and biodeterioration’s potential of polyethylene and aliphatic polyesters blends
, 2007
Article
Musampa, R. M.; Alves, M. M.; Maia, J. M.
– Phase separation, rheology and microstructure of pea protein-kappa-carrageenan mixtures
, 2007
Article
Neves, Isabel C.; Botelho, Gabriela; Machado, A. V.; Rebelo, P.; Ramoa, S.; Pereira, M. F. R.; Ramanathan, A.; Pescarmona, P.
– Feedstock recycling of polyethylene over A1TUD-1 mesoporous catalyst
, 2007-08
Article
Gonçalves, Mathias; Salmoria, Gean; Pouzada, A. S.
– Study of the tribological properties of moulds obtained by stereolithography
, 2007
Book Chapters
Morelli, Carolina L.; Sousa, José Alexandrino; Pouzada, A. S.
– Assessment of weld line performance of polypropylene/talc mouldings produced in hot runner injection moulds
, 2007
Book Chapters
Nóbrega, J. M.; Carneiro, O. S.
– Automatic design in profile extrusion: flow balance and cooling
, 2007
Book Chapters
Martínez Gamba, Matias R.; Frontini, P. M.; Pouzada, A. S.
– Impact properties and microhardness of glass reinforced polypropylene
, 2007
Book Chapters
Agassant, J. F.; Covas, J. A.
– An overview of polymer processing modelling
, 2007
Book Chapters
De Micco, S.; Frontini, P. M.; Viana, J. C.
– Fracture behaviour of injection moulded polypropylene : the effect of processing conditions
, 2007
Book Chapters
Ferreira, José C.; Fonseca, Carlos M.; Gaspar-Cunha, A.
– Selection of solutions in a multi-objective environment: polymer extrusion a case study
, 2007
Book Chapters
Vaz, Cláudia M.; Cunha, A. M.
– Soy-based materials for drug-release applications
, 2007
Book Chapters
Fernandes, Carla S.; Nóbrega, J. M.; Maia, J. M.; Dias, Ricardo P.
– CFD simulation of stirred yoghurt processing in plate heat exchangers
, 2007
Book Chapters
Sencadas, Vítor João Gomes Silva; Lanceros-Méndez, S.; Gregório Júnior, R.; Pouzada, A. S.
– Influence of the processing conditions on the morphology and crystalline phases of PVDF
, 2007
Book Chapters
Denchev, Z.
– Biodegradation studies on polymer blends and composites comprising biopolymer
, 2007