Marques, P.; Hilliou, L.; Covas, J. A.; Maia, J. M.
– Microfluidic behavior of model and complex fluids
, 2011-02
Abstract
Gonçalves, N. D.; Nóbrega, J. M.; Carneiro, O. S.
– Computer aided design of extrusion dies for complex geometry profiles
, 2011
Abstract
Santos, R. M.; Cramez, M. C.; Botelho, Gabriela; Machado, A. V.
– Effect of weathering conditions on the degradation behaviour of ABS
, 2011
Abstract
Moura, I.; Machado, A. V.; Nogueira, R.; Legare, Véronique Bounor
– Influence of EVA molar mass on preparation of EVA-g-PCL biobased copolymers
, 2011
Abstract
Mould, Sacha Trevelyan; Barbas, J. M.; Pereira, S. P.; Machado, A. V.; Nóbrega, J. M.; Covas, J. A.
– On-line rheometry to monitor nanocomposites production
, 2011-02
Abstract
Vieira, D. G.; Meireles, José F.; Nunes, J. P.
– Improving the dynamical behaviour of a laser cutting equipment by using a carbon fibre composite main structural runway frame
, 2011-04
Abstract
Sepúlveda, A. T.; Pontes, A. J.; Viana, J. C.; Rocha, Luís A.
– Aligned carbon nanotubes composites for flexible pressure sensors
, 2011-04-18
Abstract
Paiva, M. C.; Oliveira, Bruno; Covas, J. A.
– Estimating the sustainability of carbon nanotube composites: reprocessing studies
, 2011
Abstract
Barbas, J. M.; Machado, A. V.; Covas, J. A.
– Near-infrared spectroscopy for on-line monitoring of nanoclay dispersion in polymer nanocomposites
, 2011
Abstract
Martins, L. F.; Pontes, A. J.
– Melhoria da previsão de fluxo em moldação por injecção : efeito da pressão na viscosidade [Improving the flow simulation in injection moulding : the effect of pressure on viscosity]
, 2011-07
Other
Pontes, A. J.; Viana, J. C.
– Integração de tecnologia, materiais e produtos
, 2011-10
Other
Gonçalves, N. D.; Ribau, A. M.; Carneiro, O. S.; Nóbrega, J. M.
– Computer aided design of extrusion forming tools complex geometry profiles
, 2011-02
Poster
Nóbrega, J. M.; Carneiro, O. S.
– Projecto assistido por computador no apoio à concepção de ferramentas de extrusão
, 2011-10
Oral presentation
Frontini, P. M.; Pouzada, A. S.
– Is there any chance for polypropylene/clay nanocomposites in injection molding?
, 2011-08
Journal editorial
Paiva, M. C.
– Graphene nanoribbons from carbon nanotubes
, 2011-10-21
Lecture
Nunes, J. P.; Silva, J. F.; Novo, Paulo
– Processing thermoplastic matrix towpregs by pultrusion
, 2011
Preprint
2010
Simões, Ricardo; Silva, Jaime; Vaia, Richard
– A complex network based simulation approach to predict the electrical properties of nanocomposites
, 2010
Article
Viana, J. C.; Simões, Ricardo; Mano, J. F.; Oliveira, M. J.; Denchev, Z.; Brostow, Witold; Cunha, A. M.
– Thermomechanical processing environment and morphology development of a thermotropic polymer liquid crystal
, 2010
Article
Leite, Janaina L.; Rasteiro, M. G.; Salmoria, Gean; Ahrens, Carlos; Pouzada, A. S.
– Epoxy-steel fiber composites : a simple model to predict the fiber sedimentation
, 2010
Article
Bernardo, Gabriel; Vesely, Drahosh
– Equilibrium swelling of polystyrene by alkanes and carboxylic acids : a simple quantitative correlation model
, 2010
Article
González, Daniel; Campos, A. R.; Cunha, A. M.; Santos, Valentin; Parajó, Juan Carlos
– Utilization of fibers obtained by peroxyformic acid processing of broom as reinforcing agents for biocomposites
, 2010-11
Article
Yamato, Masayuki; Leer, C.; Hattum, F. W. J. van; Carneiro, O. S.; Maia, J. M.
– Direct fibre simulation of carbon nanofibres suspensions in a newtonian fluid under simple shear
, 2010
Article
Fernandes, Célio Bruno Pinto; Pontes, A. J.; Viana, J. C.; Gaspar-Cunha, A.
– Using multiobjective evolutionary algorithms in the optimization of operating conditions of polymer injection molding
, 2010
Article
Ben Abdallah, F.; Ben Cheikh, R.; Baklouti, M.; Denchev, Z.; Cunha, A. M.
– Effect of surface treatment in cork reinforced composites
, 2010-09
Article
Bessa, Paulo C.; Machado, Raul; Nürnberger, Sylvia; Dopler, Daniela; Banerjee, Asmita; Cunha, A. M.; Rodríguez-Cabello, José Carlos; Redl, Heinz; Griensven, Martijn van; Reis, R. L.; Casal, Margarida
– Thermoresponsive self-assembled elastin-based nanoparticles for delivery of BMPs
, 2010-03
Article
Peralta, Elvira Joana Ferreira; Hilliou, L.; Silva, Manuel Ribeiro Dias da; Machado, A. V.; Pais, Jorge C.; Oilveira, Joel
– Rheological quantification of bitumen aging : definition of a new sensitive parameter
, 2010
Article
Simões, Ricardo João Ferreira; Silva, Jaime; Vaia, Richard; Cadilhe, A. M.
– Applications of the graph theory to the prediction of electrical and dielectric properties of nano-filled polymers
, 2010
Article
Leite, Janaina L.; Salmoria, Gean; Paggi, R. A.; Ahrens, Carlos; Pouzada, A. S.
– A study on morphological properties of laser sintered functionally graded blends of amorphous thermoplastics
, 2010
Article
Pontes, A. J.; Queiros, Miguel P.; Martinho, P. G.; Bártolo, Paulo Jorge; Pouzada, A. S.
– Experimental assessment of hybrid mould performance
, 2010-09
Article
Silva, M. P.; Sencadas, Vítor João Gomes Silva; Botelho, Gabriela; Machado, A. V.; Rolo, Anabela G.; Rocha, J. G.; Lanceros-Méndez, S.
– α- and γ-PVDF: Crystallization kinetics, microstructural variations and thermal behaviour
, 2010-07
Article
Villanueva, R. D.; Sousa, A. M. M.; Gonçalves, M. P.; Nilsson, M.; Hilliou, L.
– Production and properties of agar from the invasive marine alga, Gracilia Vermiculophylla (Gracilariales, Rhodophyta)
, 2010-04
Article
Silva, Jorge M.; Machado, A. V.; Moldenaers, Paula; Maia, J. M.
– The role of interfacial elasticity on the rheological behavior of polymer blends
, 2010
Article
Cardoso, Paulo; Silva, J.; Paleo, A. J.; Hattum, F. W. J. van; Simões, Ricardo; Lanceros-Méndez, S.
– The dominant role of tunneling in the conductivity of carbon nanofiber-epoxy composites
, 2010
Article
Silva, P. E. S.; Abreu, F. Vistulo; Simões, Ricardo; Dias, R. G.
– A first approach to filament dynamics
, 2010-11
Article
Pedrosa, P.; Chappé, J. M.; Fonseca, C.; Machado, A. V.; Nóbrega, J. M.; Vaz, F.
– Plasma surface modification of polycarbonate and polypropylene substrates for biomedical electrodes
, 2010-06
Article
Lopes, P. E.; Hattum, F. W. J. van; Pereira, C. M. C.; Nóvoa, P. J. R. O.; Ferreo, S.; Hepp, F.; Pambaguian, L.
– High CNT content composites with CNT bucky paper and epoxy resin matrix : impregnation behaviour, composite production and characterization
, 2010
Article
Mathew, M. T.; Novo, J.; Rocha, L. A.; Covas, J. A.; Gomes, J. R.
– Tribological, rheological and mechanical characterization of polymer blends for ropes and nets
, 2010
Article
Dencheva, Nadya Vasileva; Denchev, Z.; Oliveira, M. Jovita; Funari, Sergio S.
– Microstructure studies of In situ composites based on polyethylene/polyamide 12 blends
, 2010
Article
Peralta, Elvira Joana Ferreira; Silva, Hugo Manuel Ribeiro Dias da; Machado, A. V.; Pais, Jorge C.; Pereira, Paulo A. A.; Sousa, Jorge B.
– Changes in rubber due to its interaction with bitumen when producing asphalt rubber
, 2010
Article
Paleo, A. J.; Hattum, F. W. J. van; Pereira, J.; Rocha, J. G.; Silva, J.; Sencadas, Vítor João Gomes Silva; Lanceros-Méndez, S.
– Piezoresistive effect in polypropylene-carbon nanofiber composites obtained by shear extrusion
, 2010-06
Article
Domingues, N.; Gaspar-Cunha, A.; Covas, J. A.; Camesasca, M.; Kawasse, F. M.; Manas-Zloczower, I.
– Dynamics of filler size and spatial distribution in a plasticating single screw extruder : modeling and experimental observations
, 2010
Article
Paiva, M. C.; Novais, R. M.; Araújo, R. F.; Pederson, K. K.; Proença, M. Fernanda R. P.; Silva, Carlos J. R.; Costa, Carlos M.; Lanceros-Méndez, S.
– Organic functionalization of carbon nanofibres for composite applications
, 2010
Article
Paiva, M. C.; Simon, Frank; Novais, R. M.; Ferreira, Tânia; Proença, M. Fernanda R. P.; Wei Xu; Besenbacher, F.
– Controlled functionalization of carbon nanotubes by a solvent-free multicomponent approach
, 2010
Article
Afonso, José A.; Macedo, Pedro; Silva, Hélder D.; Correia, J. H.; Rocha, L. A.
– Design and implementation of multi-user wireless body sensor networks
, 2010
Article
Yamato, Masayuki; Maia, J. M.
– Analysis of rheological properties of fibre suspensions in a Newtonian fluid by direct fibre simulation. part1 : rigid fibre suspensions
, 2010
Article
Silva, Jorge M.; Machado, A. V.; Moldenaers, Paula; Maia, J. M.
– The effect of interfacial properties on the deformation and relaxation behavior of PMMA/PS blends
, 2010
Article
Correlo, V. M.; Costa-Pinto, A. R.; Sol, P.; Covas, J. A.; Bhattacharya, Mrinal; Neves, N. M.; Reis, R. L.
– Melt processing of chitosan-based fibers and fiber-mesh scaffolds for the engineering of connective tissues
, 2010-12
Article
Dencheva, Nadya Vasileva; Denchev, Z.; Oliveira, M. J.; Carneiro, O. S.; Pouzada, A. S.
– Preparation, structural development, and mechanical properties of microfibrillar composite materials based on polyethylene/polyamide 6 oriented blends
, 2010-03
Article
Paiva, M. C.; Xu, Wei; Proença, M. Fernanda R. P.; Novais, R. M.; Laegsgaard, E.; Besenbacher, F.
– Unzipping of functionalized multiwall carbon nanotubes Induced by STM
, 2010-04-19
Article
Sanchez-Garcia, M. D.; Hilliou, L.; Lagaron, J. M.
– Nanobiocomposites of carrageenan, zein, and mica of interest in food packaging and coating applications
, 2010-05