Denysiuk, Roman; Gaspar-Cunha, A.
– Multiobjective evolutionary algorithm based on vector angle neighborhood
, 2017-12-01
Article
Botelho, Anabela; Arezes, P.; Bernardo, Carlos; Dias, Hernâni Filipe Rodrigues; Pinto, Lígia
– Effect of wind farm noise on local residents’ decision to adopt mitigation measures
, 2017-07-11
Article
Fernandes, Célio Bruno Pinto; Araujo, M. S. B.; Ferrás, Luís Jorge Lima; Miguel Nóbrega, J.
– Improved both sides diffusion (iBSD): A new and straightforward stabilization approach for viscoelastic fluid flows
, 2017
Article
Ferrás, Luís Jorge Lima; Afonso, A. M.; Nóbrega, J. M.; Pinho, F. T.
– A numerical and theoretical study on viscoelastic fluid slip flows
, 2017
Article
Dencheva, Nadya Vasileva; Vale, Diogo Manso Machado; Denchev, Z.
– Dually reinforced all-polyamide laminate composites via microencapsulation strategy
, 2017
Article
Cruz, Sílvia Manuela Ferreira; Sousa, Andre; Viana, J. C.; Martins, Tiago
– Analysis of the bonding process and materials optimization for mitigating the Yellow Border defect on optically bonded automotive display panels
, 2017-07-01
Article
Cruz, Sílvia Manuela Ferreira; Rocha, Luís Alexandre Machado; Viana, J. C.
– Piezo-resistive behaviour at high strain levels of PEDOT:PSS printed on a flexible polymeric substrate by a novel surface treatment
, 2017-02-01
Article
Khaliq, Muhammad Hussam; Gomes, Rui; Fernandes, Célio Bruno Pinto; Nóbrega, J. M.; Carneiro, O. S.; Ferrás, Luís Jorge Lima
– On the use of high viscosity polymers in the fused filament fabrication process
, 2017
Article
de Sá, Arsénio; Moura, Isabel; Abreu, Ana S.; Oliveira, Manuel António Sousa Cortez Gonçalves; Ferreira, Miguel F.; Machado, A. V.
– High fluorescent water soluble CdTe quantum dots—a promising system for light harvesting applications
, 2017
Article
Delgado-Lima, Ana; Fonseca, A. M.; Machado, A. V.
– Novel iridium-pentafluorophenyl porphyrin complex
, 2017
Article
Lima, Ana Luísa Delgado; Borges, João P.; Ferreira, Isabel M.; Machado, A. V.
– Fluorescent and conductive cellulose acetate-based membranes with porphyrins
, 2017
Article
Parveen, Shama; Rana, Sohel; Fangueiro, Raúl; Paiva, M. C.
– A novel approach of developing micro crystalline cellulose reinforced cementitious composites with enhanced microstructure and mechanical performance
, 2017
Article
Lima, Ana Luísa Delgado; Paiva, M. C.; Machado, A. V.
– Cellulose acetate/carbon nanotube composites by melt mixing
, 2017
Article
Bicalho, Luciana Assumpção; Silva, Jorge Manuel Jardim da; Covas, J. A.; Canevarolo, Sebastião Vicente
– Real-time thermo-optical analysis of polymer samples by quantitative polarized optical microscopy
, 2017
Article
Gaspar, Hugo; Teixeira, Paulo; Santos, Raquel; Fernandes, Liliana; Hilliou, L.; Weir, Michael P.; Parnell, Andrew J.; Abrams, Kerry J.; Hill, Christopher J.; Bouwman, Wim G.; Parnell, Steven R.; King, Stephen M.; Clarke, Nigel; Covas, J. A.; Bernardo, Gabriel
– A journey along the extruder with polystyrene:C60 nanocomposites: convergence of feeding formulations into a similar nanomorphology
, 2017
Article
Moura, I.; de Sá, Arsénio; Abreu, Ana S.; Oliveira, M.; Machado, A. V.
– Hybrid nanocomposites of a fluorescent block copolymer and quantum dots: an efficient way for energy transfer
, 2017
Article
Laadila, Mohamed Amine; Hegde, Krishnamoorthy; Rouissi, Tarek; Brar, Satinder Kaur; Galvez, Rosa; Sorelli, Luca; Cheikh, R. B.; Paiva, M. C.; Abokitse, Kofi
– Green synthesis of novel biocomposites from treated cellulosic fibers and recycled bio-plastic polylactic acid
, 2017
Article
Rajkumar, A.; Ferrás, Luís Jorge Lima; Fernandes, C.; Carneiro, O. S.; Becker, M.; Nóbrega, J. M.
– Design guidelines to balance the flow distribution in complex profile extrusion dies
, 2017
Article
Royer, Alexandre; Barrière, Thierry; Gelin, Jean-Claude; Hilliou, L.
– Development and characterisation of a biosourced feedstock of superalloy in metal injection moulding process
, 2017
Article
Marques, Filipe; Clain, Stéphane; Machado, Gaspar J.; Martins, Bruno; Carneiro, O. S.; Nóbrega, J. M.
– A new energy conservation scheme for the numeric study of the heat transfer in profile extrusion calibration
, 2017-09-01
Article
Vilaça, Helena; Castro, Tarsila Gabriel; Costa, Fernando Miguel Gonçalves; Melle-Franco, Manuel; Hilliou, L.; Hamley, Ian W.; Castanheira, Elisabete M. S.; Martins, J. A. R.; Ferreira, Paula M. T.
– Self-assembled RGD dehydropeptide hydrogels for drug delivery applications
, 2017
Article
Quintana, David; Denysiuk, Roman; Garcia-Rodriguez, Sandra; Gaspar-Cunha, A.
– Portfolio implementation risk management using evolutionary multiobjective optimization
, 2017
Article
Costantino, Maria A.; Rueda, Frederico; Pettarin, Valeria; Frontini, Patricia M.; Pontes, A. J.; Viana, J. C.
– Characterization of PP/TPV/MMT ternary nanocomposites produced by injection molding
, 2017-06-01
Article
Costa, S. F.; Duarte, F. M.; Covas, J. A.
– Estimation of filament temperature and adhesion development in fused deposition techniques
, 2017
Article
Parveen, Shama; Rana, Sohel; Fangueiro, Raúl; Paiva, M. C.
– Characterizing dispersion and long term stability of concentrated carbon nanotube aqueous suspensions for fabricating ductile cementitious composites
, 2017
Article
Silva, Magda Sofia Gonçalves; Caridade, Sofia Glória Ferreira; Vale, A. Catarina; Cunha, Eunice Paula Freitas; Sousa, Maria P.; Mano, J. F.; Paiva, M. C.; Alves, N. M.
– Biomedical films of graphene nanoribbons and nanoflakes with natural polymers
, 2017-05
Article
Ferreira, João Amaro Oliveira; Fonseca, Carlos M.; Denysiuk, Roman; Gaspar-Cunha, A.
– Methodology to select solutions for multiobjective optimization problems: Weighted stress function method
, 2017
Article
de Sa, Arsenio; Abreu, Ana S.; Moura, Isabel; Machado, A. V.
– Polymeric materials for metal sorption from hydric resources
, 2017-01
Book Chapters
Covas, J. A.
– In-process measurements for reactive extrusion monitoring and control
, 2017-10
Book Chapters
Denchev, Z.; Dencheva, Nadya Vasileva
– Synthesis, characterization, and applications of polyolefin-polyamide micro- and nanofibrillar composites
, 2017
Book Chapters
Cunha, Eunice Paula Freitas
– Functionalized graphene for polymer composites
, 2017-01-30
PhD Theses
Almeida, Raquel Carvalho de Ferreira Costa e
– Routes for enhancing tendon regeneration using cell-based therapies
, 2017-12-14
PhD Theses
Oliveira, Nuno Miguel Ribeiro
– Biomedical devices engineered based on the control of the surface wettability
, 2017-05-12
PhD Theses
Guise, Ana Catarina da Silva
– Development of fibrous structures for brain phantoms
, 2017-01-26
PhD Theses
Gonçalves, Ana Isabel Silva
– Exploring cell sources and magnetic stimuli as tools for advancing tendon tissue engineering strategies
, 2017-12-14
PhD Theses
Teixeira, Rafaela Marisa Fernandes
– Potencial da impressão 3D na produção de estruturas técnicas para compósitos
, 2017
MSc Theses
Costa, Pedro Filipe Alves da
– Development and study of hybrid cords for tire reinforcement
, 2017-07-21
MSc Theses
Barbosa, Leonor Lopes
– Desenvolvimento da tecnologia da simbologia dia e noite com retroiluminação em peças plásticas bi-material com acabamento de cromagem
, 2017
MSc Theses
Braga, Vitor Hugo Vidal
– Desenvolvimento e melhoria de um molde e acompanhamento do seu processo produtivo
, 2017-09-29
MSc Theses
Teixeira, Filipe Manuel Neto
– Moldação científica: estudo da otimização de processos de injeção
, 2017
MSc Theses
Costa, Gonçalo Nuno Martins
– Análise de filme antifog
, 2017
MSc Theses
Ribeiro, Paulo Ricardo da Silva
– Chemical and mechanical characterization of coated fibers
, 2017
MSc Theses
Silveira, Gonçalo Campos de Araújo Mesquita da
– Desenvolvimento de pele artificial respirável para assentos de automóvel
, 2017
MSc Theses
Gonçalves, Ricardo Luís Machado
– Injeção multimaterial com compósitos de cortiça
, 2017
MSc Theses
Ribeiro, Ricardo André Sousa Marques
– Drag models for particle suspensions in viscoelastic fluids
, 2017-12-04
MSc Theses
Ribeiro, Fábio Luís Oliveira
– Melhoria do processo de moldação por injeção de um caso real
, 2017-09-29
MSc Theses
Rompante, Joana Raquel da Silva
– Desenvolvimento de nanocompósitos a partir de microcápsulas de poliamida e grafeno
, 2017
MSc Theses
Costa, Sónia Daniela Pereira da
– Avaliação do uso de transdutores de pressão piezoelétricos em extrusão
, 2017
MSc Theses
Nogueira, Mónica Sofia Peixoto
– Glass cover with self-cleaning surface by coatings for automotive applications
, 2017
MSc Theses
Ferraz, Tiago Filipe Pereira
– Caracterização à fadiga de vedantes em TPE
, 2017