Gaspar-Cunha, A.; Mendes, F.; Duarte, J.; Vieira, Armando; Ribeiro, Bernardete; Ribeiro, André M. S.; Neves, João Carvalho
– Multi-objective evolutionary algorithms for feature selection : application in bankruptcy prediction
, 2010
Conference paper
Pettarin, Valeria; Fasce, L.; Frontini, P. M.; Correia, M. S.; Pontes, A. J.; Viana, J. C.; Pouzada, A. S.
– Surface property effects of compounding a nanoclay masterbatch in PP injection moulding
, 2010-09
Conference paper
Braga, I.; Abreu, Maria José Araújo Marques; Duarte, F. M.
– Simulating human physiological response with a thermal manikin testing different non active medical devices
, 2010
Conference paper
Dias, R. A.; Cretu, E.; Wolffenbuttel, R. F.; Rocha, Luís A.
– Characterization of a pull-In based μg resolution accelerometer
, 2010
Conference paper
Sampaio, A. M.; Terroso, Miguel; Pontes, A. J.; Simões, Ricardo
– Product design for the health sector: usability issues in embedding tracing technologies in surgical instruments
, 2010
Conference paper
Torres, L. M.; Silva, J. F.; Marques, A. T.; Nunes, J. P.; Marques, R. P.
– Glass/polyvinyl chloride composites
, 2010
Conference paper
Queirós, M. P.; Pontes, A. J.
– Thermoelectrical regulation of microinjection moulds
, 2010
Conference paper
Pettarin, V.; Pontes, A. J.; Viau, G.; Viana, J. C.; Frontini, P. M.; Pouzada, A. S.
– Impact behavior of injected PP/nanoclay parts
, 2010
Conference paper
Mendes, F.; Duarte, J.; Vieira, Armando; Gaspar-Cunha, A.
– Feature selection for bankruptcy prediction: a multi-objective optimization approach
, 2010
Conference paper
Rajaraman, V.; Hau, B. S.; Rocha, L. A.; French, P. J.; Makinwa, K. A. A.
– Design of a flexible contact-mode piezoresistive detector for time-based high sensitivity acceleration sensing
, 2010
Conference paper
Pettarin, V.; Brun, F.; Pontes, A. J.; Viana, J. C.; Pouzada, A. S.; Frontini, P.
– Fracture toughness of injection moulded organoclay reinforced polypropylene composites
, 2010
Conference paper
Brecx, B.; Cardon, Ludwig; Pontes, A. J.
– Process simulation and morphology evolution of micromouldings
, 2010
Conference paper
Nogueira, A. A.; Pouzada, P. S.; Martinho, P. G.; Pouzada, A. S.
– A new way to produce conformal cooling channels by RPT for moulding blocks of the hybrid moulds
, 2010-09
Conference paper
Oliveira, M.; Machado, A. V.; Nogueira, R.
– Development of permeable reactive barrier for phosphorus removal
, 2010
Conference paper
Teixeira, Cristina; Covas, J. A.; Stützle, Thomas; Gaspar-Cunha, A.
– Optimization of Co-rotating twin-screw extruders using pareto local search
, 2010
Conference paper
Velosa, J. C.; Nunes, J. P.; Silva, J. F.; Bernardo, C. A.; Marques, A. T.
– Production of thermoplastic towpregs
, 2010
Conference paper
Sepúlveda, A. T.; Moreira, A.; Fachin, F.; Wardle, B. L.; Silva, J. M.; Pontes, A. J.; Viana, J. C.; Rocha, L. A.
– Inductive-coupling system for abdominal aortic aneurysms monitoring based on pressure sensing
, 2010
Conference paper
Cunha, A. C.; Pontes, A. J.
– Microinjection of polipropylene with nanoclays
, 2010
Conference paper
Costa, S. F.; Duarte, F. M.; Covas, J. A.
– Modelling of the thermal behaviour of free form extrusion
, 2010
Conference paper
Almeida, Maria de Fátima; Machado, A. V.; Covas, J. A.
– The morphology during extrusion of PA6/PP blends in the presence of nanoclays
, 2010
Conference paper
Gaspar-Cunha, A.; Fernandes, Célio Bruno Pinto; Viana, J. C.; Pontes, A. J.
– Multi-objective optimization of injection molding
, 2010
Conference paper
Gaspar-Cunha, A.
– Feature selection using multi-objective evolutionary algorithms : application to cardiac SPECT diagnosis
, 2010
Conference paper
Ribeiro, Bernardete; Silva, C.; Vieira, Armando; Gaspar-Cunha, A.; Neves, João
– Financial distress model prediction using SVM +
, 2010
Conference paper
Ferreira, Tânia; Cunha, Andrea Correia; Paiva, M. C.; Pontes, A. J.
– Microinjection moulding of polyamide with functionalized carbon nanotubes
, 2010
Conference paper
Santos, R. M.; Botelho, Gabriela; Machado, A. V.
– Role of ultraviolet absorbers (UVA) and hindered amine light stabilizers (HALS) in ABS stabilization
, 2010
Conference paper
Sousa, A. M. M.; Sereno, A. M.; Hilliou, L.; Gonçalves, M. P.
– Biodegradable agar extracted from gracilaria vermiculophylla: films properties and application to edible coating
, 2010
Conference paper
Silva, M. A.; Martinho, P. G.; Pouzada, A. S.
– Warpage of injection mouldings in hybrid moulds with epoxy-aluminium composite core
, 2010
Conference paper
Teixeira, Cristina; Covas, J. A.; Gaspar-Cunha, A.
– A global modelling program for co-rotating twin-screw extruders
, 2010
Abstract
Cunha, S. M.; Gaspar-Cunha, A.; Covas, J. A.
– Melting of polymer blends and concomitant morphology development in single screw extruders
, 2010
Abstract
Sepúlveda, A. T.; Sampaio, M.; Cortez, J.; Pontes, A. J.
– Characterization of micro-mouldings at different processing conditions: microstructure and mechanical properties
, 2010-01
Other
2009
Machado, A. V.; Antunes, C. F.; Duin, M. van
– Degradation of the rubber network during dynamic vulcanization of EPDM/PP blends using phenolic resol
, 2009
Article
Martinho, P. G.; Bártolo, Paulo Jorge; Pouzada, A. S.
– Hybrid moulds : effect of the moulding blocks on the morphology and dimensional properties
, 2009
Article
Morelli, Carolina L.; Pouzada, A. S.; Sousa, José Alexandrino
– Influence of hybridization of glass fiber and talc on the mechanical performance of polypropylene composites
, 2009-08-12
Article
Machado, A. V.; Almeida, M. F.; Larocca, N. M.; Pessan, L. A.
– Dispersion mechanisms of nanoclays in a polymer matrix by electron microscopy
, 2009
Article
Araújo, M. Alberta; Cunha, A. M.; Mota, M.
– Enzymatic degradation of starch thermoplastic blends using samples of different thickness
, 2009-02
Article
Hilliou, L.; Wilhelm, Manfred; Yamanoi, Mikio; Gonçalves, Maria P.
– Structural and mechanical characterization of kappa/iota-hybrid carrageenan gels in potassium salt using Fourier Transform rheology
, 2009
Article
Cunha, S. M.; Gaspar-Cunha, A.; Covas, J. A.
– Melting of polymer blends in single-screw extrusion : an experimental study
, 2009
Article
Velosa, J. C.; Nunes, J. P.; Antunes, P. J.; Silva, J. F.; Marques, A. T.
– Development of a new generation of filament wound composite pressure cylinders
, 2009
Article
Machado, A. V.; Yquel, Virginie; Covas, J. A.; Flat, Jean.-Jacques
– Contribution of the melting stage to the evolution of the morphology and chemical conversion of immiscible polyamide/polyethylene blends in twin-screw extruders
, 2009
Article
Vasco, Joel Oliveira Correia; Maia, J. M.; Pouzada, A. S.
– Thermo-rheological behaviour of polymer melts in microinjection moulding
, 2009-09-17
Article
Costa, José Carlos Gomes; Oliveira, M.; Machado, A. V.; Lanceros-Méndez, S.; Botelho, Gabriela
– Effect of antistatic additives on mechanical and electrical properties of polyethylene foams
, 2009
Article
Matias, João Manuel; Bártolo, Paulo Jorge; Pontes, A. J.
– Modeling and simulation of photofabrication processes using unsaturated polyester resins
, 2009
Article
Machado, A. V.; Antunes, C. F.; Duin, M. van
– Phase inversion phenomena of EPDM /PP : based TPVs by Electronic Microscopy
, 2009
Article
Hilliou, L.; Freitas, Filomena; Oliveira, Rui; Reis, Maria A.M.; Lespineux, David; Grandfils, Christian; Alves, Vítor D.
– Solution properties of an exopolysaccharide from a Pseudomonas strain obtained using glycerol as sole carbon source
, 2009
Article
Proença, M. Fernanda R. P.; Araújo, R. F.; Paiva, M. C.; Silva, Carlos J. R.
– The diels-alder cycloaddition reaction in the functionalization of carbon nanofibers
, 2009-10-01
Article
Pouzada, A. S.
– Hybrid moulds : a case of integration of alternative materials and rapid prototyping for tooling
, 2009
Article
Fangueiro, Raúl; Nunes, J. P.; Soutinho, Hélder Filipe Cunha; Araújo, Mário Duarte de
– Development of fibrous preforms for frp tube connections
, 2009
Article
Villanueva, R.D.; Hilliou, L.; Sousa-Pinto, I.
– Postharvest culture in the dark: An eco-friendly alternative to alkali treatment for enhancing the gel quality of κ/ι-hybrid carrageenan from Chondrus crispus (Gigartinales, Rhodophyta)
, 2009
Article
Covas, J. A.; Gaspar-Cunha, A.
– Extrusion scale-up : an optimization-based methodology
, 2009
Article
Machado, A. V.; Covas, J. A.; Bounor-Legare, V.; Cassagnau, P.
– Reactive polymer processing and design of stable micro- and nanostructures
, 2009