Costa, H. J.; Neiva, J. M.; Cunha, E. M.; Simões, J. F.; Carneiro, O. S.; Covas, J. A.
– Linha de extrusão laboratorial para a produção de filme tubular biorientado
, 2005
Book Chapters
Hattum, F. W. J. van; Leer, C.; Gaspar-Cunha, A.; Bernardo, C. A.
– Aplicação de uma metodologia de optimização na extrusão de compósitos termoplásticos com nanofibras de carbono
, 2005
Book Chapters
Gaspar-Cunha, A.; Covas, J. A.; Pereira, J.; Cerqueira, M. F.; Marreiros, Filipe; Pereira, Pedro
– e-xtruder.net: concepção e desenvolvimento de um sistema automático de modelação e optimização de extrusoras
, 2005
Book Chapters
Nunes, J. P.; Hattum, F. W. J. van; Bernardo, C. A.; Brito, A. M.; Pouzada, A. S.; Silva, J. F.; Marques, A. T.
– Production of thermoplastic towpregs and towpreg-based composites
, 2005
Book Chapters
Gaspar-Cunha, A.; Covas, J. A.; Machado, B.
– Extrusoras de laboratório para actividades de I&D
, 2005
Book Chapters
Carneiro, O. S.; Nóbrega, J. M.
– CAE aplicado ao projecto de cabeças de extrusão
, 2005
Book Chapters
Martinho, P.; Bártolo, P. J.; Queirós, Luís Miguel Pinto de; Pontes, A. J.; Pouzada, A. S.
– Hybrid moulds : the use of combined techniques for the rapid manufacturing of injection moulds
, 2005
Conference paper
Pontes, A. J.; Gago, P. T.; Bártolo, P. J.; Soares, R.; Pouzada, A. S.
– Hibridmolde: a project towards the new mould generation
, 2005
Other
Montes-Morán, M. A.; Hattum, F. W. J. van; Nunes, J. P.; Martínez-Alonso, A.; Tascón, J. M. D.; Bernardo, C. A.
– A study of the effect of plasma treatment on the interfacial properties of carbon fibre–thermoplastic composites
, 2005
Letter to editor
2004
Paiva, M. C.; Zhou, B.; Fernando, K. A. S.; Lin, Y.; Kennedy, J. M.; Sun, Y. P.
– Mechanical and morphological characterization of polymer–carbon nanocomposites from functionalized carbon nanotubes
, 2004-08-14
Article
Botelho, Gabriela; Gijsman, P.; Machado, A. V.; Queirós, Arlete
– Laurolactam as a stabilizer against the thermo-oxidative degradation of poly(ether-ester)
, 2004-09
Article
Carneiro, O. S.; Nóbrega, J. M.
– Recent developments in automatic die design for profile extrusion
, 2004-11
Article
Pontes, A. J.; Pouzada, A. S.
– Ejection force in tubular injection moldings. Part I : effect of processing conditions
, 2004-05
Article
Machado, A. V.; Covas, J. A.; Van Duin, M.
– A study of grafting reactions during processing of polyolefins
, 2004
Article
Machado, A. V.; Maia, J. M.; Canevarolo, S. V.; Covas, J. A.
– Evolution of peroxide-induced thermomechanical degradation of polypropylene along the extruder
, 2004
Article
Covas, J. A.; Carneiro, O. S.; Costa, P.; Machado, A. V.; Maia, J. M.
– Online monitoring techniques for studying evolution of physical, rheological and chemical effects along the extruder
, 2004
Article
Gaspar-Cunha, A.; Covas, J. A.
– The use of evolutionary algorithms to solve practical problems in polymer extrusion
, 2004
Book Chapters
Marques, A. P.
– Biofunctionality and immunocompatibility of starch-based biomaterials
, 2004
PhD Theses
Pontes, A. J.; Brito, A. M.; Pouzada, A. S.
– Effect of melt viscosity on the ejection force in injection moulds
, 2004
Conference paper
Machado, A. V.; Gaspar-Cunha, A.; Covas, J. A.
– Modelling of the grafting of maleic anhydride onto polyethylene in an extruder
, 2004
Conference paper
Machado, A. V.; Covas, J. A.
– Effect of experimental conditions on the grafting of maleic anhydride onto polyethylene in extruders
, 2004
Conference paper
Pontes, A. J.; Oliveira, M.; Pouzada, A. S.
– The effect of holding pressure on the shrinkage and birefringence of injection moulded polypropylene plates
, 2004
Conference paper
Gaspar-Cunha, A.; Covas, J. A.
– RPSGAe - Reduced Pareto Set Genetic Algorithm : application to polymer extrusion
, 2004
Conference paper
2003
Barroso, Vitor C.; Ribeiro, Sandra P.; Maia, João Manuel Luís Lopes
– Unusual extensional behavior of a polystyrene/HIPS blend
, 2003
Article
Cramez, M. C.; Oliveira, M. J.; Crawford, R. J.
– Optimization of the rotational moulding process for polyolefins
, 2003
Article
Afonso, I. M.; Hes, Lubos; Maia, J. M.; Melo, L. F.
– Heat transfer and rheology of stirred yoghurt during cooling in plate heat exchangers
, 2003
Article
Barroso, V. C.; Ribeiro, Sandra P.; Maia, J. M.
– Stress relaxation after a step strain in uniaxial extension of polyisobutylene and polyethylene
, 2003
Article
Fonseca, S. Cabral; Paiva, M. C.; Nunes, J. P.; Bernardo, C. A.
– A novel technique for the interfacial characterization of glass fiber-polypropylene systems
, 2003-05-07
Article
Paiva, M. C.; Kotasthane, P.; Ogale, A. A.; Edie, D. D.
– UV stabilization route for melt-processible PAN-based carbon fibers
, 2003-01-29
Article
Pontes, A. J.; Neves, N. M.; Pouzada, A. S.
– The role of the interaction coefficient in the prediction of the fiber orientation in planar injection moldings
, 2003
Article
Pontes, A. J.; Araújo, Billy Jácome de; Pouzada, A. S.
– Development of efficient ejection systems for injection moulds
, 2003
Article
Brostow, Witold; Cunha, A. M.; Simões, Ricardo
– Generation of polymeric structures on a computer
, 2003
Article
Carneiro, O. S.; Nóbrega, J. M.; Oliveira, P. J.; Pinho, F. T.
– Flow balancing in extrusion dies for thermoplastic profiles Part II: Influence of the design strategy
, 2003
Article
Duarte, F. M.; Covas, J. A.
– Infrared sheet heating in roll fed thermoforming: Part 2 - Factors influencing inverse heating solution
, 2003
Article
Nunes, J. P.; Silva, J. F.
– Production of powder coated towpregs and composites
, 2003
Article
Nóbrega, J. M.; Carneiro, O. S.; Oliveira, P. J.; Pinho, F. T.
– Flow balancing in extrusion dies for thermoplastic profiles: Part I: Automatic design
, 2003
Article
Van Duin, Martin; Martin, Philippe; Machado, A. V.; Legras, Roger; Van Gurp, Marnix
– Interfacial chemistry and morphology of blends of polybutyleneterephthalate and epoxide-containing rubber
, 2003-10
Conference paper
Godinho, J. S.; Sampaio, M.; Cunha, A. M.
– Development of 3D porous scaffolds of starch based polymers by conventional injection moulding
, 2003
Other
2002
Ezquerra, T. A.; Sics, I.; Nogales, A.; Denchev, Z.; Baltá-Calleja, F. J.
– Simultaneous crystalline-amorphous phase evolution during crystallization of polymer systems
, 2002
Article
Barroso, V. C.; Covas, J. A.; Maia, J. M.
– Sources of error and other difficulties in extensional rheometry revisited: commenting and complementing a recent paper by T. Schweizer
, 2002
Article
Gaspar-Cunha, A.; Poulesquen, A.; Vergnes, B.; Covas, J. A.
– Optimization of Processing Conditions for Polymer Twin-screw Extrusion
, 2002
Article
Cunha, L.; Andritschky, M.; Pischow, K.; Wang, Z.; Zarychta, A.; Miranda, A. S.; Cunha, A. M.
– Performance of chromium nitride and titanium nitride coatings during plastic injection moulding
, 2002
Article
Cramez, M. C.; Oliveira, M. J.; Crawford, R. J.
– Optimisation of rotational moulding of polyethylene by predicting antioxidant consumption
, 2002
Article
Viana, J. C.; Cunha, A. M.; Billon, N.
– The thermomechanical environment and the microstructure of an injection moulded polypropylene copolymer
, 2002
Article
Cuesta Arenas, Juan M.; Mano, J. F.; Gómez Ribelles, J. L.
– Phase heterogeneity in poly(methyl acrylate)-polystyrene sequential interpenetrating polymer networks studied by thermally stimulated recovery
, 2002
Article
Machado, A. V.; Duin, M. van; Covas, J. A.
– Monitoring the Evolution of the Properties of PA-6/EPM-g-MA Blends in a Twin-Screw Extruder
, 2002
Article
Alves, N. M.; Mano, J. F.; Gómez Ribelles, J. L.
– Molecular mobility in polymers studied with thermally stimulated recovery. II. Study of the glass transition of a semicrystalline PET and comparison with DSC and DMA results
, 2002
Article
Godinho, J. S.; Cunha, A. M.; Crawford, R. J.
– Prediction of mechanical properties of Polyethylene parts produced by different moulding methods
, 2002-08
Article
Brostow, Witold; Cunha, A. M.; Quintanilla, John; Simões, Ricardo
– Crack Formation and Propagation in Molecular Dynamics Simulations of Polymer Liquid Crystals
, 2002
Article
Alves, N. M.; Mano, J. F.; Gómez Ribelles, J. L.
– Influence of experimental variables on thermally stimulated recovery results: analysis of simulations and real data on a polymeric system
, 2002