2014

Oliveira, Manuel; Machado, A. V. – Nanocomposites prepared by reactive extrusion: effect of the polymer reactive groups , 2014

Fernandes, Liliana; Gaspar, Hugo; Bernardo, Gabriel – Inhibition of thermal degradation of polystyrene by C60 and PCBM : a comparative study , 2014-09-19

Bernardo, Gabriel; Nabankur, Deb; Pereira, Paulo; Brandão, Lúcia; Viana, Júlio; Bucknall, David G. – Solid-state low-temperature extrusion of P3HT ribbons , 2014-07-17

Fernandes, E. M.; Aroso, Ivo Manuel Ascensão; Mano, J. F.; Covas, J. A.; Reis, R. L. – Functionalized cork-polymer composites (CPC) by reactive extrusion using suberin and lignin from cork as coupling agents , 2014-11

Michelangelli, O. P.; Gaspar-Cunha, A.; Covas, J. A. – The influence of pellet-barrel friction on the granular transport in a single screw extruder , 2014

Leite, Janaina L.; Pouzada, A. S.; Maia, J. M.; Salmoria, Gean; Ahrens, Carlos – A study on fiber sedimentation velocity in epoxy/steel fiber composites used for hybrid injection molds , 2014

Dencheva, Nadya Vasileva; Sampaio Ana Sofia; Oliveira, F. M.; Pouzada, A. S.; Brito, A. M.; Denchev, Z. – Preparation and properties of polyamide-6-based thermoplastic laminate composites by a novel in-mold polymerization technique , 2014

Sabet, Seyyed M.M.; Marques, Jorge; Torres, Rui; Nova, Mario; Hattum, F. W. J. van; Nóbrega, J. M. – Numerical modelling of a rollover carwash machine structure , 2014

Bernacka-Wojcik, I.; Ribeiro, S.; Jerzy Wojcik, P.; Alves, P. Urbano; Busani, T.; Fortunato, Elvira; Baptista, Pedro Viana; Covas, J. A.; Aguas, H; Hilliou, L.; Martins, R. – Experimental optimization of a passive planar rhombic micromixer with obstacles for effective mixing in a short channel length , 2014

Torres, Maria D.; Hallmark, Bart; Wilson, D. Ian; Hilliou, L. – Natural Giesekus fluids: shear and extensional behavior of food gum solutions in the semidilute regime , 2014

Afonso, A. M.; Ferrás, Luís Jorge Lima; Nóbrega, J. M.; Alves, M. A.; Pinho, F. T. – Pressure-driven electrokinetic slip flows of viscoelastic fluids in hydrophobic microchannels , 2014

Oliveira, M.; Mota, C.; Abreu, Ana S.; Nóbrega, J. M. – Development of a green material for horticulture , 2014-11

Dencheva, Nadya Vasileva; Gaspar, Hugo; Filonovich, Sergej; Lavrova, Olga; Busani,Tito; Bernardo, Gabriel; Denchev, Z. – Fullerene-modified polyamide 6 by in situ anionic polymerization in the presence of PCBM , 2014-03-29

Gaspar-Cunha, A.; Recio, Gustavo; Costa, L.; Estébanez, C. – Self-adaptive MOEA feature selection for classification of bankruptcy prediction data , 2014

Tomé, M. F.; Castelo, A.; Nóbrega, J. M.; Carneiro, O. S.; Paulo, G. S.; Pereira, F. T. – Numerical and experimental investigations of three-dimensional container filling with Newtonian viscous fluids , 2014

Gaspar-Cunha, A.; Covas, J. A. – The plasticating sequence In barrier extrusion screws part II: Experimental assessment , 2014

Hilliou, L.; Sereno, A. M.; Gonçalves, Maria P. – Gel setting of hybrid carrageenan solutions under steady shear , 2014

Moura, I.; Nogueira, R.; Bounor-Legare, Véronique; Machado, A. V. – Effect of PCL and EVA molar mass on the development of sustainable polymers , 2014

Ferrás, Luís Jorge Lima; Afonso, A. M.; Alves, M. A.; Nóbrega, J. M.; Pinho, F. T. – Analytical and numerical study of the electro-osmotic annular flow of viscoelastic fluids , 2014-04

Ferrás, Luís Jorge Lima; Afonso, A. M.; Alves, M. A.; Nóbrega, J. M.; Pinho, F. T.; Carneiro, O. S. – Slip flows of Newtonian and viscoelastic fluids in a 4:1 contraction , 2014

Moura, I.; Botelho, Gabriela; Machado, A. V. – Characterization of EVA/PLA blends when exposed to different environments , 2014

Gaspar, Hugo; Fernandes, Liliana; Brandão, Lúcia; Bernardo, Gabriel – Increase in thermo-oxidation stability of conjugated polymers at high temperatures , 2014-02

Ferrás, Luís Jorge Lima; Afonso, A. M.; Alves, M. A.; Nóbrega, J. M.; Pinho, F. T. – Annular flow of viscoelastic fluids: Analytical and numerical solutions , 2014-10

Terroso, Miguel; Rosa, Natacha; Marques, António Torres; Simões, Ricardo – Physical consequences of falls in the elderly: a literature review from 1995 to 2010 , 2014

Deb, Kalyanmoy; Bandaru, Sunith; Greiner, David; Gaspar-Cunha, A.; Tutum, Cem Celal – An integrated approach to automated innovization for discovering useful design principles : case studies from engineering , 2014-02

Peralta, J.; Hilliou, L.; Silva, Hugo Manuel Ribeiro Dias da; Machado, A. V.; Williams, R. Christopher – Rheological changes in the bitumen caused by heating and interaction with rubber during asphalt–rubber production , 2014

Ferreira, Tânia; Lopes, P. E.; Pontes, A. J.; Paiva, M. C. – Microinjection molding of polyamide 6 , 2014-08

Gaspar-Cunha, A.; Covas, J. A. – The plasticating sequence in barrier extrusion screws part I : modeling , 2014

Cyriac, Febin; Covas, J. A.; Hilliou, L.; Vittorias, Iakovos – Predicting extrusion instabilities of commercial polyethylene from non-linear rheology measurements , 2014

Santos, R. M.; Botelho, Gabriela; Machado, A. V. – Development of acrylonitrile-butadiene-styrene composites with enhanced UV stability , 2014

Gaspar-Cunha, A.; Ferreira, José C.; Recio, Gustavo – Evolutionary robustness analysis for multi-objective optimization : benchmark problems , 2014

Teixeira, Cristina; Covas, J. A.; Stützle, Thomas; Gaspar-Cunha, A. – Hybrid algorithms for the twin-screw extrusion configuration problem , 2014

Gaspar-Cunha, A.; Covas, J. A. – A universal engineering scale-up approach using multi-objective optimization , 2014

Araújo, Rui Filipe; Proença, M. Fernanda R. P.; Silva, Carlos J. R.; Paiva, M. C.; Villar-Rodil, Silvia; Tascón, Juan Manuel D. – The solvent effect on the sidewall functionalization of multi-walled carbon nanotubes with maleic anhydride , 2014-07-16

Teixeira, P. F.; Maia, J. M.; Covas, J. A.; Hilliou, L. – In-line particle size assessment of polymer suspensions during processing , 2014

Brandão, Lúcia; Viana, Júlio; Bucknall, David G.; Bernardo, Gabriel – Solventless processing of conjugated polymers - a review , 2014

Barbosa, Carlos N.; Gonçalves, Frederico; Viana, J. C. – Nano and hybrid composites based on poly( ethylene terephthalate): blending and characterization , 2014

Sanches-Silva, Ana; Costa, Denise; Albuquerque, Tania G.; Buonocore, Giovanna Giuliana; Ramos, Fernando; Castilho, Maria Conceicao; Machado, A. V.; Costa, Helena S. – Trends in the use of natural antioxidants in active food packaging: a review , 2014-03

Loureiro, N. C.; Esteves, J. L.; Viana, J. C.; Ghosh, Satyabrata – Development of polyhydroxyalkanoates/poly(lactic acid) composites reinforced with cellulosic fibers , 2014-04-01

Araújo, Andreia Isabel Silva; Botelho, Gabriela; Oliveira, Mariana Braga; Machado, A. V. – Influence of clay organic modifier on the thermal-stability of PLA based nanocomposites , 2014-02

Todorov, Lyudmil Valentinov; Martins, Carla I.; Viana, J. C. – In situ WAXS/SAXS structural evolution study during uniaxial stretching of poly(ethylene terephthalate) nanocomposites in the solid state: poly(ethylene terephthalate)/titanium dioxide and poly(ethylene terephthalate)/silica nanocomposites , 2014

Araújo, Andreia Isabel Silva; Oliveira, M.; Oliveira, R.; Botelho, Gabriela; Machado, A. V. – Biodegradation assessment of PLA and its nanocomposites , 2014-08-01

Barbas, Joana M.; Machado, A. V.; Covas, J. A. – Processing conditions effect on dispersion evolution in a twin-screw extruder: polypropylene-clay nanocomposites , 2014

Mould, S.; Barbas, J.; Machado, A. V.; Nóbrega, J. M.; Covas, J. A. – Preparation of polymer-clay nanocomposites by melt mixing in a twin screw extruder: Using on-line SAOS rheometry to assess the level of dispersion , 2014

Machado, Ana Vera; Barbas, Joana Margarida Oliveira; Covas, J. A. – Near IR spectroscopy for the characterization of dispersion in polymer-clay nanocomposites , 2014

Hilliou, L. – Hybrid carrageenans : isolation, chemical structure, and gel properties , 2014

Pontes, A. J.; Carvalho, José Manuel Martins de; Marques, Pedro Miguel Pereira; Vieira, Igor Alexandre; Ribeiro, Igor Alexandre Vieira – Perfil compósito para colector solar, respectivo método de produção e utilização , 2014

Oliveira, N.; Magalhães, R.; Pontes, A. J. – Sistema flexível de moldação por injecção multilateral , 2014

Denchev, Z.; Dencheva, Nadya Vasileva – Polyamide microcapsules and method to produce the same , 2014-06-03

Carvalho, José Manuel Martins de; Marques, Pedro Miguel Pereira; Pontes, A. J.; Vieira, Igor Alexandre – Material compósito de granulado de borracha de pneus usados reciclado numa matriz polimérica , 2014