Silva, Q.; Lourenço, E.; Martins, Carla I.
– Application of DMAIC method in an industrial case study
, 2020
Conference paper
Rocha, Ana Maria A. C.; Matos, Marina A.; Costa, M. Fernanda P.; Gaspar-Cunha, A.; Fernandes, Edite Manuela da G. P.
– Single screw extrusion optimization using the tchebycheff scalarization method
, 2020
Conference paper
Kuzmanovic, Maja; Delva, Laurens; Martins, Carla I.; Cardon, Ludwig; Ragaert, Kim
– MFC concept as a possible solution for closed-loop recycling of food packaging trays
, 2020-01-10
Conference paper
Kumar, Manish; Rocha, Helena Cristina Lopes; Nunes, J. P.; Pugazhenthi, G.
– Mechanical, thermal and morphological characteristics of poly(methyl methacrylate) (PMMA) nanocomposites reinforced with Cu-Cr layered double hydroxide
, 2020
Conference paper
Sampaio, Álvaro M.; Gonçalves, Rita; Lima, André; Cruz, Paulo J. S.; Figueiredo, Bruno; Carvalho, S.; Pontes, A. J.
– Design for additive manufacturing of mechanical connections toward hybrid products
, 2020
Conference paper
Novo, P. J.; Nunes, J. P.; Silva, J. F.; Marques, A. T.
– Compression molding of pultruded carbon reinforced thermoplastic composites
, 2020
Conference paper
Araújo, D. J. C.; Vilarinho, M. C. L. G.; Machado, A. V.
– Agroindustrial residues as cellulose source for food packaging applications
, 2020-01
Conference paper
Rocha, Ana Maria A. C.; Matos, Marina A.; Costa, M. Fernanda P.; Gaspar-Cunha, A.; Fernandes, Edite Manuela da G. P.
– Polymer single screw extruder optimization using tchebycheff scalarization method and simulated annealing algorithm
, 2020
Conference paper
Martins, M. M.; Carneiro, O. S.; Fernandes, C.; Nóbrega, J. M.
– On the design of co-extrusion dies for polymeric multilayer products
, 2020-06
Poster
Fakhari, Ahmad; Tukovic, Zeljko; Carneiro, O. S.; Nóbrega, J. M.; Fernandes, C.
– Assessing the free surface tracking approach to simulate extrudate swell
, 2020-06
Poster
Fernandes, C.; Faroughi, S. A.; Nóbrega, J. M.; McKinley, G. H.
– Exploratory project 2019 - deep learning for particle-laden viscoelastic flow modelling
, 2020-10
Poster
Fontaínhas, Ana Margarida Cunhal; Pedro, João Luís Oliveira; Nóbrega, J. M.; Fernandes, C.
– Numerical simulation of the injection moulding filling stage using open-source and commercial software
, 2020-06
Oral presentation
Pedro, João Luís Oliveira; Ramôa, Bruno Manuel Oliveira; Nóbrega, J. M.; Fernandes, C.
– On the simulation of the filling stage of thermoplastic injection molding using the open-source solver openInjMoldSim
, 2020-10
Oral presentation
Faroughi, S.A.; Fernandes, C.; Nóbrega, J. M.; McKinley, G.H.
– Development of the drag coefficient of a sphere translating through a viscoelastic fluid
, 2020
Oral presentation
Nóbrega, J. M.
– Computational rheology et al. with OpenFOAM® computational library
, 2020-12
Oral presentation
Fernandes, C.; Faroughi, Salah Aldin; Ribeiro, R.; McKinley, Gareth Huw
– CFD-DEM modeling of particle-laden viscoelastic flows in hydraulic fracturing operations
, 2020
Oral presentation
2019
Santos, Ana Raquel Ribeiro; Amorim, Luís; Nunes, J. P.; Rocha, L. A.; Ferreira da Silva, Alexandre; Viana, J. C.
– A comparative study between knocked-down aligned carbon nanotubes and buckypaper-based strain sensors
, 2019-06-23
Article
Dorigato, A.; Freitas, V.; Covas, J. A.; Paiva, M. C.; Brugnara, M.; Pegoretti, A.
– Evaluation of the role of carbon nanotubes on the electrical properties of poly(butylene-terephthalate) nanocomposites for industrial applications
, 2019
Teixeira, Paulo Francisco; Sutera, F.; Scaffaro, R.; Covas, J. A.; Hilliou, L.
– Multi-parameter in-process monitoring of clay dispersion during melt compounding with PLA
, 2019
Article
Costa, P.; Gonçalves, S.; Mora, H.; Carabineiro, S. A. C.; Viana, J. C.; Lanceros-Méndez, S.
– Highly sensitive piezoresistive graphene-based stretchable composites for sensing applications
, 2019
Article
Gross, Heinz; Gross, Sebastian; Nóbrega, J. M.; Vidal, Joao P. O.
– 3D-printed minimalists
, 2019
Article
Cano-Raya, Clara; Denchev, Z.; Cruz, Sílvia F.; Viana, J. C.
– Chemistry of solid metal-based inks and pastes for printed electronics – A review
, 2019-06
Article
Ayadi, M.; Cheikh, R. B.; Dencheva, Nadya Vasileva; Denchev, Z.
– Preparation and characterization of a biocomposite based on cork microparticles in poly(β-hydroxybutyrate)-co-poly(β-hydroxyvalerate) matrix
, 2019-04
Article
Rajkumar, Ananth; Habla, F.; Fernandes, C.; Mould, Sacha Trevelyan; Sacramento, A.; Carneiro, O. S.; Nóbrega, J. M.
– Profile extrusion: experimental assessment of a numerical code to model the temperature evolution in the cooling/calibration stage
, 2019-11-01
Article
Ribeiro, Micaela; Carneiro, O. S.; Ferreira da Silva, Alexandre
– Interface geometries in 3D multi-material prints by fused filament fabrication
, 2019
Article
Carvalho, André; Gallo, Juan; Pereira, David M.; Valentão, Patrícia; Andrade, Paula B.; Hilliou, L.; Ferreira, Paula M. T.; Bañobre-López, Manuel; Martins, J. A.
– Magnetic dehydrodipeptide-based self-assembled hydrogels for theragnostic applications
, 2019-04-03
Article
Dios, Jose Ramon; García-Astrain, Clara; Costa, Pedro Filipe Ribeiro; Viana, J. C.; Lanceros-Méndez, S.
– Carbonaceous filler type and content dependence of the physical-chemical and electromechanical properties of thermoplastic elastomer polymer composites
, 2019-04-30
Article
Sampaio, Álvaro M.; Simoes, Paulo; Arezes, P.; Pontes, A. J.
– Hand-product contact point detection on surgical instruments - a user evaluation
, 2019
Article
Denysiuk, Roman; Gaspar-Cunha, A.; Delbem, Alexandre C. B.
– Neuroevolution for solving multiobjective knapsack problems
, 2019-02
Article
Abdallah, Y.; Cheikh, R. Ben; Paiva, M. C.
– Could Alfa fibers substitute glass fibers in composite materials?
, 2019
Article
Tohidi, Shafagh Dinparast; Rocha, A. M.; Dencheva, Nadya Vasileva; Pouzada, A. S.; Denchev, Z.
– Comparative structural and mechanical studies on polyamide 6 knitted-reinforced single polymer composites prepared by different reactive processing techniques
, 2019
Article
Fernandes, C.; Faroughi, S. A.; Carneiro, O. S.; Nóbrega, J. M.; McKinley, G. H.
– Fully-resolved simulations of particle-laden viscoelastic fluids using an immersed boundary method
, 2019
Article
Cunha, Eunice; Paiva, M. C.
– Composite films of waterborne polyurethane and few-layer graphene-enhancing barrier, mechanical, and electrical properties
, 2019-04-03
Article
Costa, Ricardo Daniel Pereira da; Nóbrega, J. M.; Clain, Stéphane; Machado, Gaspar J.; Loubere, Raphael
– Very high-order accurate finite volume scheme for the convection-diffusion equation with general boundary conditions on arbitrary curved boundaries
, 2019
Article
Araújo, David Jefferson Cardoso; Machado, A. V.; Vilarinho, Cândida
– Availability and suitability of agroindustrial residues as feedstock for cellulose-based materials: Brazil case study
, 2019
Article
Dinparast Tohidi, Shafagh; Denchev, Z.; Rocha, Ana Maria; Dencheva, Nadya V.; Engesser, Bernhard; Pouzada, A. S.
– Mechano-morphological studies of polyamide 6 based single polymer laminate composites prepared by different reactive processing techniques
, 2019-10
Article
Tohidi, Shafagh Dinparast; Rocha, A. M.; Engesser, Bernhard; Dencheva, Nadya Vasileva; Denchev, Z.
– Micromechanical finite element parametric study of polyamide 6 based single polymer composites reinforced by woven textile structures
, 2019-10
Article
Lopes, Diana; Fernandes, C.; Miguel Nobrega, J.; Patricio, Sonia G.; Oliveira, Mariana Braga; Mano, J. F.
– Screening of perfused combinatorial 3D microenvironments for cell culture
, 2019-09-15
Article
Silva, Miguel Reis; Pereira, António M.; Alves, Nuno; Mateus, Gonçalo; Mateus, Artur; Malça, Cândida
– Development of an additive manufacturing system for the deposition of thermoplastics impregnated with carbon fibers
, 2019-04-27
Article
Peixoto, Cláudia; Soares, Ana M. S.; Araújo, Andreia Isabel Silva; Olsen, Bradley D.; Machado, A. V.
– Non-isocyanate urethane linkage formation using l-lysine residues as amine sources
, 2019-09
Article
Oliveira, F.; Dencheva, Nadya Vasileva; Lanceros-Méndez, S.; Nunes, T.; Denchev, Z.
– Binary polyamide hybrid composites containing carbon allotropes and metal particles with radiofrequency shielding effect
, 2019
Article
Araujo, David; Vilarinho, Cândida; Machado, A. V.
– Effect of combined dilute-alkaline and green pretreatments on corncob fractionation: Pretreated biomass characterization and regenerated cellulose film production
, 2019
Article
Gonçalves, Sérgio; Serrado-Nunes, Jivago; Oliveira, Juliana; Pereira, Nelson; Hilliou, L.; Costa, Carlos Miguel Silva; Lanceros-Méndez, S.
– Environmentally friendly printable piezoelectric inks and their application in the development of all-printed touch screens
, 2019
Article
Fernandes, Célio; Ferrás, Luís Jorge Lima; Habla, Florian; Carneiro, O. S.; Nóbrega, J. M.
– Implementation of partial slip boundary conditions in an open-source finite-volume-based computational library
, 2019
Article
Denysiuk, Roman; Gonçalves, Nuno; Pinto, Renê Souza; Silva, Hugo Miguel Andrade Lopes Figueiredo; Duarte, F. M.; Nunes, J. P.; Gaspar-Cunha, A.
– Optimization of injection blow molding: part I – defining part thickness profile
, 2019
Article
Costa, Ana Elisa; Ferreira da Silva, Alexandre; Carneiro, O. S.
– A study on extruded filament bonding in fused filament fabrication
, 2019
Article
Fernandes, C.; Vukcevic, V.; Uroic, T.; Simões, Ricardo João Ferreira; Carneiro, O. S.; Jasak, H.; Nóbrega, J. M.
– A coupled finite volume flow solver for the solution of incompressible viscoelastic flows
, 2019
Article
Kharrat, F.; Chaari, R.; Khlif, M.; Hilliou, L.; Covas, J. A.; Haboussi, M.; Nouri, H.; Bradai, C.
– The effect of the process on mechanical properties of polylactic acid - date palm leaf fibers composite films produced by extrusion blowing
, 2019
Article
Santos, Ana Raquel Ribeiro; Amorim, Luís Manuel Machado; Nunes, J. P.; Rocha, L. A.; Silva, A. F.; Viana, J. C.
– Aligned carbon nanotube based sensors for strain sensing applications
, 2019-04-15