Lanceros-Méndez, S.; Mano, J. F.; Mendes, J. A.
– Cooperative and local relaxations in complex systems : polymers and crystals
, 2002
Conference paper
Neves, N. M.; Pontes, A. J.; Velosa, J. C.; Faria, A. R.; Pouzada, A. S.
– Glass fibre content of PP plates and their properties: part II: tensile mechanical properties
, 2002
Conference paper
2001
Oliveira, M. J.; Bernardo, C. A.; Hemsley, D. A.
– Morphology and Mechanical Behavior of Polypropylene Hot Plate Welds
, 2001
Article
Liu, Z. Q.; Cunha, A. M.; Yi, X.-S.; Bernardo, C. A.
– Thermal Characterizations of Wood Flour/Starch Cellulose Acetate Compounds
, 2001
Article
Alves, N. M.; Mano, J. F.; Gómez Ribelles, J. L.
– Molecular mobility in a thermoset as seen by TSR and DMA near Tg
, 2001
Article
Nogales, A.; Ezquerra, T. A.; Denchev, Z.; Baltá-Calleja, F. J.
– Induction time for cold crystallization in semi-rigid polymers: PEN and PEEK
, 2001
Article
Paiva, M. C.; Bernardo, C. A.; Edie, D. D.
– A comparative analysis of alternative models to predict the tensile strength of untreated and surface oxidised carbon fibers
, 2001
Article
Alves, N. M.; Mano, J. F.; Gómez Ribelles, J. L.
– Structural relaxation in a polyester thermoset as seen by thermally stimulated recovery
, 2001
Article
Montes-Morán, M. A.; Martínez-Alonso, A.; Tascón, J. M. D.; Paiva, M. C.; Bernardo, C. A.
– Effects of plasma oxidation on the surface and interfacial properties of carbon fibres/ polycarbonate composites
, 2001
Article
Nunes, J. P.; Brito, A. M.; Pouzada, A. S.; Bernardo, C. A.
– Isothermal and Non-Isothermal Consolidation of Carbon Fiber Towpregs
, 2001
Article
Nogueira, Elisabete Maria da Silva Marques; Gomes, E. Matos; Belsley, M.; Lanceros-Méndez, S.; Cunha, José Maria Cerqueira; Criado Vega, Alberto; Mano, J. F.
– Re-crystallization of MNA under a strong dc electric field
, 2001
Article
Neves, N. M.; Pontes, A. J.; Pouzada, A. S.
– Experimental validation of morphology simulation in glass fibre reinforced polycarbonate discs
, 2001
Article
Mano, J. F.; Viana, J. C.
– Effects of the strain rate and temperature in stress–strain tests: study of the glass transition of a polyamide-6
, 2001
Article
Carneiro, O. S.; Nóbrega, J. M.; Pinho, F. T.; Oliveira, P. J.
– Computer aided rheological design of extrusion dies for profiles
, 2001
Article
Mano, J. F.; Lanceros-Méndez, S.; Nunes, A. M.; Dionísio, M.
– Temperature calibration in dielectric measurements
, 2001
Article
Machado, A. V.; Covas, J. A.; Duin, M. van
– Effect of polyolefin structure on maleic anhydride grafting
, 2001
Article
Muschalle, René; Ferreira, Eduardo Campos; Neves, N. M.; Pouzada, A. S.
– Friction behaviour of thermoplastics : test method to determine the friction coefficient between plastics and moulding surfaces
, 2001
Article
Denchev, Z.; Kricheldorf, Hans R.; Fakirov, Stoyko
– Sequential reordering in condensation copolymers, 6a average block lengths in Poly(ethylene terephthalate) - Polyamide 6 copolymers as revealed by NMR spectroscopy
, 2001
Article
Araújo, M. Alberta; Vaz, Cláudia M.; Cunha, A. M.; Mota, M.
– In-vitro degradation behaviour of starch/EVOH biomaterials
, 2001
Article
Brito, A. M.; Pontes, A. J.; Febra, A.; Oliveira, J.; Selada, António; Pouzada, A. S.
– Injection mould for assessment of ejection forces
, 2001
Article
Lanceros-Méndez, S.; Mano, J. F.; Costa, A. M.; Schmidt, V. H.
– FTIR and DSC Studies of Mechanically Deformed β-VDF Films
, 2001
Article
Gaspar-Cunha, A.; Covas, J. A.
– The design of extrusion screws : an optimization approach
, 2001
Article
Fernandes, A. J. S.; Silva, V. A.; Carrapichano, J. M.; Dias, Gustavo R.; Silva, R. F.; Costa, F. M.
– MPCVD diamond tool cutting-edge coverage: dependence on the side wedge angle
, 2001
Article
Gordeyev, S. A.; Ferreira, J. A.; Bernardo, C. A.; Ward, I. M.
– A promising conductive material: highly oriented polypropylene filled with short vapour-grown carbon fibres
, 2001
Article
Cramez, M. C.; Oliveira, M. J.; Fakirov, Stoyko; Crawford, R. J.; Apostolov, Anton Atanassov; Krumova, Marina
– Rotationally Molded Polyethylene: Structural Characterization by X-Ray and Microhardness Measurements
, 2001
Article
Viana, J. C.; Cunha, A. M.; Billon, N.
– The effect of the skin thickness and spherulite size on the mechanical properties of injection mouldings
, 2001-09
Article
Cunha, A. M.; Liu, Z. Q.; Feng, Y.; Yi, X.-S.; Bernardo, C. A.
– Preparation, processing and characterization of biodegradable wood flour/starch-cellulose acetate compounds
, 2001
Article
van Duin, Martin; Machado, A. V.; Covas, J. A.
– A look inside the extruder: evolution of chemistry, morphology and rheology along the extruder axis during reactive processing and blending
, 2001-06
Article
Machado, A. V.; Covas, J. A.; Walet, M; Van Duin, M
– Effect of composition and processing conditions on the chemical and morphological evolution of PA-6/EPM/EPM-g-MA blends in a corotating twin-screw extruder
, 2001-05
Article
Machado, A. V.; Covas, J. A.; Van Duin, M
– Monitoring polyolefin modification along the axis of a twin screw extruder. I. Effect of peroxide concentration
, 2001-07
Article
2000
Martins, J. A.; Pinto, J. J. C. Cruz
– Non-isothermal crystallisation kinetics with instantaneous nucleation
, 2000
Article
Godinho, J. S.; Cunha, A. M.; Crawford, R. J.
– Influence of thermomechanical conditions on structure development and mechanical properties of polyethylene mouldings produced using different moulding methods
, 2000
Article
Pontes, A. J.; Pantani, R.; Titomanlio, G.; Pouzada, A. S.
– Solidification Criterion on Shrinkage Predictions for Semi-Crystalline Injection Moulded Samples
, 2000
Article
Gordeyev, S. A.; Macedo, F. J.; Ferreira, J. A.; Hattum, F. W. J. van; Bernardo, C. A.
– Transport properties of polymer-vapour grown carbon fibre composites
, 2000
Article
Carneiro, O. S.; Maia, J. M.
– Rheological Behavior of (Short) Carbon Fiber/ Thermoplastic Composites. Part II: The Influence of Matrix Type
, 2000
Article
Paiva, M. C.; Bernardo, C. A.; Nardin, M.
– Mechanical, surface and interfacial characterisation of pitch and PAN-based carbon fibres
, 2000
Article
Godinho, J. S.; Cunha, A. M.; Crawford, R. J.
– Prediction of mechanical properties of polyethylene mouldings based on laminate theory and thermomechanical indices
, 2000
Article
Liu, Z. Q.; Cunha, A. M.; Yi, X.-S.; Bernardo, C. A.
– Key Properties to Understand the Performance of Polycarbonate Reprocessed by Injection Molding
, 2000
Article
Covas, J. A.; Nóbrega, J. M.; Maia, J. M.
– Rheological measurements along an extruder with an on-line capillary rheometer
, 2000
Article
Barros, I.; Teixeira, S. F. C. F.; Teixeira, J. C. F.; Cunha, A. M.
– Evaluation of the thermal behaviour of injection moulds
, 2000
Article
Oliveira, M. J.; Hemsley, D. A.
– The Weldability of Polypropylene Strapping Tape
, 2000
Article
Carneiro, O. S.; Maia, J. M.
– Rheological Behavior of (Short) Carbon Fiber/ Thermoplastic Composites. Part I: The Influence of Fiber Type, Processing Conditions and Level of Incorporation
, 2000
Article
Covas, J. A.; Machado, A. V.; Duin, M. van
– Rheology of PA-6/EPM/EPM-g- MA Blends Along a Twin-Screw Extruder
, 2000
Article
Machado, A. V.; Covas, J. A.; van Duin, M.
– Monitoring polyolefin modification along the axis of a twin-screw extruder. II. maleic anhydride grafting
, 2000-09-20
Article
Pouzada, A. S.; Rodrigues, A. J. Guimarães
– Case study 11 : a new model for CE in the University of Minho, Portugal
, 2000
Book Chapters
Pouzada, A. S.
– Setting up PBL for design in plastics
, 2000
Book Chapters
Machado, A. V.
– Chemistry, morphology and rheology evolution along the extruder
, 2000
PhD Theses
Campos, A. R.
– Comportamento de compósitos borracha/cortiça para aplicação em juntas
, 2000
MSc Theses
1999
Hattum, F. W. J. van; Bernardo, C. A.
– A Model to Predict The Strength of Short Fiber Composites
, 1999
Article
Macedo, F. J.; Ferreira, J. A.; Hattum, F. W. J. van; Bernardo, C. A.
– Thermal diffusivity measurements of vapour grown carbon fibre composites, using the optical beam deflection technique
, 1999